User guide

A8
Using the Auto Pivot and Auto Mirror functions
Auto Mirror
Screen switch : The monitor screen is automatically reversed when you switch it
forward/backward as shown in the figure.
Tip
If you activate the Auto Pivot or the Auto Mirror function while the screen is
almost level, the screen may not work properly.
In this case, set the screen upright and adjust it to the proper angle.
It is recommended that in order to maintain an ergonomic and comfortable
viewing position, the forward tilt angle of the monitor should not exceed
5 degrees.
❉ Caution : Do not touch the screen while you rotate the panel.
➪ This rear view represents a typical model. Your display model may differ from the illustration below.
<When rotated by 180
degrees>
<Pushing the screen
backwards>
<Rotating clockwise>
Tilt the screen
while rotating
it so that the monitor
does not touch
the floor.
Do not hold the
screen area as
shown in the picture
when rotating it,
otherwise your
fingers might get
hurt or get stuck.