User manual

A9
Control Panel Functions
MENU Button
Use this button to enter or exit from the On Screen Display.
Control Function
OSD LOCKED/UNLOCKED
This function allows you to lock the current control
settings, so that these settings are not inadvertently
changed. To lock the OSD settings, press and hold the
MENU button for several seconds. The message "OSD
LOCKED" appears.
You can unlock the OSD settings at any time by pushing
the MENU button for several seconds. The message
"OSD UNLOCKED" appears.
- + Buttons
Use these buttons to select or adjust functions in the On
Screen Display.
For more information, refer to page A16.
Use this button to make either D-Sub or DVI connector
active. This feature is used when two computers are
connected to the display. The default setting is D-Sub.
+
Button
(SOURCE Hot key)
- Button
( )
Front Panel Controls
Bottom