User manual

DC-IND-SUBDVI-D

Connecting the Display

Connecting with the PC

1. Before setting up the monitor, ensure that the power to the monitor, the computer

system, and other attached devices is turned off.

2. Connect the signal cable ① . After it is attached, tighten the thumbscrews to secure the

connection.

3. Connect the power cable ➂ to the AC-DC adapter (AC-DC power supply) ② , and then

plug the cable into the outlet.

Wall-outlet type

Mac adapter

For Apple Macintosh use, a separate plug

adapter is needed to change the 15 pin high

density (3 row) D-sub VGA connector on the

supplied cable to a 15 pin 2 row connector.

4. Press the button on the front switch panel to turn

the power on. When the power is turned on, the 'Self

Image Setting Function' will launch automatically.

(Only Analog Mode)

MAC

NOTE

This is a simplified representation of the rear view.

This rear view represents a general model; your display may differ from

the view as shown.

DVI-D Cable

(This feature is not available in all countries.)

NOTE

‘ Self Image Setting Function’? This function provides the user with optimal display

settings.When the user connects the monitor for the first time, this function automatically

adjusts the display to optimal settings for individual input signals.

‘AUTO/SET’ Function? When you encounter problems such as blurry screen, blurred

letters, screen flicker or tilted screen while using the device or after changing screen

resolution, press the AUTO/SET function button to improve resolution.