Owners manual

A3
Connecting the Display
Important
This illustration depicts the general model of connection. Your monitor may differ from
the items shown in the picture.
Do not carry the product upside down holding only the stand base. The product may
fall and get damaged or injure your foot.
Before setting up the monitor, ensure that the power to the monitor, the computer
system, and other attached devices is turned off.
Connecting the stand
1. Place the monitor with its front facing downward on a soft cloth.
2. Check the direction (front, rear) of the stand body, and assemble it to the hinge body as shown
at the figure.
4
.
Connect the cable deco cover to the stand body to the direction of the arrow mark.
Stand Body
Stand Base
Stand Body
Hinge Body
Stand Body
Stand Base
Cable Deco Cover
3. Assemble the Stand Base(Front, Rear) into the Stand Body in the correct direction.
5. Once assembled take the monitor up carefully and face the front side