User’s Guide L226WA Make sure to read the Important Precautions before using the product. Keep the User's Guide(CD) in an accessible place for furture reference. See the label attached on the product and give the information to your dealer when you ask for service.
Important Precautions This unit has been engineered and manufactured to ensure your personal safety, however improper use may result in potential eletrical shock or fire hazards. In order to allow the proper operation of all safeguards incorporated in this display, observe the following basic rules for its installation, use, and servicing. On Safety Use only the power cord supplied with the unit.
Important Precautions On Installation Do not allow anything to rest upon or roll over the power cord, and do not place the display where the power cord is subject to damage. Do not use this display near water such as near a bathtub, washbowl, kitchen sink, laundry tub, in a wet basement, or near a swimming pool. Displays are provided with ventilation openings in the cabinet to allow the release of heat generated during operation.
Connecting the Display Before setting up the monitor, ensure that the power to the monitor, the computer system, and other attached devices is turned off. Connecting the stand 1. Place the monitor with its front facing downward on a soft cloth. 2. Assemble the Stand Body into the product in the correct direction as shown in the picture. Make sure you push it until you hear it “click”. Stand Body Hinge Body 3. Assemble the Stand Base(Front, Rear) into the Stand Body in the correct direction. 4.
Connecting the Display To remove the Stand: Type.A 1. Put a cushion or soft cloth on a flat surface. 2. Place the monitor face down on the cushion or soft cloth. The Head part The Stand base part 3. Pushing Latch inside, Take the stand base from stand body. 4. Separate the stand using a screwdriver as shown in the picture. Note: Please keep the 4 screw in an accessible place for future use. 5. Pack up the product as shown in the picture.
Connecting the Display To remove the Stand: Type.B 1. Put a cushion or soft cloth on a flat surface. 2. Place the monitor face down on the cushion or soft cloth. The Head part The Stand base part 3. Change your hold on the product as it follows and turn the Stand Base in the arrow direction. 4. Pull out the Stand to remove. 5. Pushing Latch inside, Take the stand base 6. Pack up the product as shown in the picture. from stand body.
Connecting the Display Before setting up the monitor, ensure that the power to the monitor, the computer system, and other attached devices is turned off. Positioning your display 1. Adjust the position of the panel in various ways for maximum comfort. Tilt Range : -5˚~20˚ Swivel :355˚ Ergonomic It is recommended that in order to maintain an ergonomic and comfortable viewing position, the forward tilt angle of the monitor should not exceed 5 degrees.
Name and function of the Parts PB 6 PR COMPONENT Y Rear View AUDIO OUT AC-IN 1 2 HDMI DVI-D D-SUB 3 4 5 7 1 Kensington Security Slot 2 AC-IN Connector : Connect the Power Cord 3 HDMI Signal Connector 4 DVI-D input terminal (digital signal connector) 5 D-SUB Analogue Signal Connector 6 COMPONENT Input Terminal 7 Audio out Jack(Headset/Earphone/connecting terminal of the Speaker) : You can use the AUDIO-OUT Jack by connecting earphones or a headset when using the HDMI configuration.
Connecting to External Devices When Connecting to your PC 1. Place the monitor in a convenient, well-ventilated location near your computer. To adjust height of your monitor, unlock the stand lock on top of the stand. 2. Connect the signal cable. When attached, tighten the thumbscrews to secure the connection. 1 3. Connect the power cord into a proper power outlet that is easily accessible and close to the display. 2 PB PR COMPONENT Y NOTE Varies according to model.
Connecting to External Devices When Watching DVD/Video/HDTV When connecting with a Component cable 1. Connect the Component cables and RCA to Stereo cables properly. Connect the terminals to the sockets of the same color. PB PR COMPONENT Y 2. Connect the power cord. AUDIO OUT AC-IN HDMI DVI-D D-SUB Speaker (not included) AUDIO IN Monitor RCA-Stereo cable (not included) Component Cable (not included) DVD/VIDEO/HDTV DVD/VIDEO/HDTV 3. Press the SOURCE button at the front side of the monitor.
Connecting to External Devices When Watching DVD/Video/HDTV When connecting with a HDMI cable PB PR COMPONEN 1. Connect the HDMI cables and Audio cables properly. AUDIO OUT DC-OUT HDMI DVI-D D-SUB Audio cable (not included) HDMI cable (not included) DVD/VIDEO/HDTV 2. Press the SOURCE button at the front side of the monitor. SOURCE A -+ AUTO/SET INPUT RGB DVI HDMI Component When connecting with a HDMI cable.
Connecting to External Devices To arrange the cables PB COMPONENT Y After connecting the cables neatly, arrange the cables to the Cable Holder as shown in the following figure. AUDIO OUT HDMI AC-IN DVI-D AUDIO OUT PR 1.
Control Panel Functions Front Panel Controls Button At the current display, Use 'ez Zooming' Key, then the display resolution is transferred to the one step low resolution. Use 'ez Zooming' Key one more, the display is back to the original display. *Only One touch of ez-zoom, you can fine the best resolution you want and it is possible to magnify the size of characters and pictures for the old not having good eye sight, housewives not dealing with computer well and children.
Control Panel Functions Use this button to enter or exit the On Screen Display. MENU Button Controls locked/Controls unlocked This function allows you to lock the current control settings, so that they cannot b inadvertently changed. Use this function to lock or unlock OSD display settings. To lock the setting, go to the special function in the OSD menu and select “On” for Child lock. The message, “Controls locked” will be displayed.
On Screen Display (OSD) Control Adjustment Screen Adjustment Making adjustments to the image size, position and operating parameters of the display is quick and easy with the On Screen Display Control system. A short example is given below to familiarize you with the use of the controls. The following section is an outline of the available adjustments and selections you can make using the OSD. NOTE Allow the display to stabilize for at least 30 minutes before making image adjustments.
On Screen Display(OSD) Selection and Adjustment OSD (On Screen Display) menu Icon Function Description Adjusting Screen Colour. PICTURE Selecting the options. SPECIAL Screen Adjustment. SCREEN Adjusting PIP Mode (Multiple Screen) Functions. PIP/DW PIP Note OSD(On Screen Display) The OSD function enables you to adjust the screen status conveniently since it provides graphical presentation.
On Screen Display(OSD) Selection and Adjustment Adjusting Screen Colour EZ Video HDMI, Component input The EZ Video function automatically adjusts the screen image quality depending on the AV usage environment. • Dynamic : Select this option to display with a sharp image. • Standard : The most general and natural screen display status. • Mild : Select this option to display with a mild image. • Game : Select this option to enjoy dynamic image when playing a game.
On Screen Display(OSD) Selection and Adjustment Adjusting Screen Colour PC only • 6500K/9300K/sRGB Selecting a factory setting colour set. 6500K: Slightly reddish white. 9300K: Slightly bluish white. sRGB : Set the screen color to fit the SRGB standard color • User : Select this option to use the user-defined settings. CSM EZ Video CSM User Brightness To adjust the brightness of the screen. Contrast To adjust the contrast of the screen. Red / Green / Blue Set your own colour levels.
On Screen Display(OSD) Selection and Adjustment Selecting the options Input Child Lock Language Power Indicator Transparency Reset DDC-CI Input If you press the button once, the following Input Signal Window will appear. Select the signal type you want using the - + button. Input Child Lock Language Power Indicator Transparency Reset DDC-CI Child lock This feature can prevent unauthorized viewing. In order to lock the OSD screen adjustment, set the Child lock tab to the 'On' position.
On Screen Display(OSD) Selection and Adjustment Screen Adjustment SCREEN ARC Auto-configure Clock Phase Position HDMI ARC To select the image size of the screen. * Menu varies depending on the type of input signal. ARC is activated in Video signal but deactivated in 1080i. SCREEN ARC Full Auto-configure Original Clock Phase Position HDMI Full Original AutoConfigure This function is suitable for analogue signal input only.
On Screen Display(OSD) Selection and Adjustment Position This function is suitable for analogue signal input only. To adjust position of the screen. Press the AUTO/SET button to display the sub-menu for position. SCREEN ARC Auto-configure H-Position Clock Phase Position V-Position H-Position: Moving the screen position horizontally. HDMI V-Position: Moving the screen position vertically. HDMI Video: Used when it is connected with DVD or SET-TOP BOX through HDMI.
On Screen Display(OSD) Selection and Adjustment Adjusting PIP Mode (Multiple Screen) Functions (To adjust the sub screen) On/Off Off PIP Input PIP Position On/Off PIP Input PIP After selecting PIP in the PIP On/Off menu, the following menu items can be adjusted. To select an input signal for PIP To adjust the position of PIP screen. Position On/Off PIP Input Position * The following table is the available option to match the main screen and PIP screen.
Troubleshooting Check the following before calling for service. No image appears Is the power cord of the • Check and see if the power cord is connected properly to the power outlet. display connected? Is the power indicator light on? • Press the Power button. Is the power on and the • Adjust the brightness and the contrast.
Troubleshooting Display image is incorrect Display Position is incorrect. • Press the AUTO/SET button to automatically adjust your display image to the ideal setting. If the results are unsatisfactory, adjust the image position using the H position and V position icon in the on screen display. • Check Control Panel --> Display --> Settings and see if the frequency or the resolution were changed. If yes, readjust the video card to the recommend resolution.
Troubleshooting Have you installed the display driver? Have you installed the display driver? • Be sure to install the display driver from the display driver CD (or diskette) that comes with your display. Or, you can also download the driver from our web site: http://www.lge.com. Do you see an "Unrecognized monitor, Plug&Play (VESA DDC) monitor found" message? • Make sure to check if the video card supports Plug&Play function. The audio function does not work.
Specifications Display 22 inches (55.868 cm) Flat Panel Active matrix-TFT LCD Anti-Glare coating 22 inches viewable 0.282 mm pixel pitch Sync Input Horizontal Freq. Vertical Freq. Input Form Video Input Signal Input 15 pin D-Sub Connector, HDMI connector DVI connector(Digital), Component RGB Analog (0.
Specifications PC INPUT Preset Modes (Resolution) Display Modes (Resolution) 1 2 3 4 5 6 7 8 9 10 720 x 400 640 x 480 640 x 480 800 x 600 800 x 600 1024 x 768 1024 x 768 1152 x 864 1280 x 1024 1280 x 1024 Horizontal Vertical Freq. (kHz) Freq. (Hz) 31.468 31.469 37.50 37.879 46.875 48.363 60.123 67.5 63.981 79.976 70.08 59.94 75 60.317 75 60 75.029 75 60.02 75.035 Display Modes (Resolution) 1680 x 1050 1680 x 1050 11 *12 Horizontal Freq. (kHz) Vertical Freq. (Hz) 64.674 65.290 59.883 59.
Specifications HDMI Type Pin Assignment No.1 No.2 Type A pin 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 No.19 No.18 Signal Name T. M. D. S. Data2+ T. M. D. S. Data2 Shield T. M. D. S. Data2T. M. D. S. Data1+ T. M. D. S. Data1 Shield T. M. D. S. Data1T. M. D. S. Data0+ T. M. D. S. Data0 Shield T. M. D. S. Data0T. M. D. S. Clock+ T. M. D. S. Clock Shield T. M. D. S. ClockCEC Reserved(In cable but N.C.
How to Install the VESA Standard wall mounting This monitor meets VESA-compliant mounting interface pad specifications. After moving the product to face downward, make sure to place it on a soft cloth or a cushion to avoid surface damage. PB PR COMPONENT Y 1. AUDIO OUT AC-IN DC-OUT HDMI D-SUB DVI-D 2. Separate the head and the stand with the PB PR COMPONENT Y use of a screwdriver. AUDIO OUT AC-IN DC-OUT HDMI D-SUB DVI-D 3. Set up the VESA standard Stand Base.
Digitally yours
