Install Manual

AC Module System Installation Manual

Rev. 1.0

E. You can check the PLC level in dashboard. It is recommended for the PLC level to have two or three. If the PLC

level is zero or one, Relocate the EnerBox2 to a location where few home appliances are installed.

F. Briefly press the AP button on EnerBox2 to deactivate the Soft AP mode. The ‘MOBILE / S-METER’ LED is off.

PLC level indicator

- : Inappropriate PLC level for communication

- : Intermittent communication failure is imminent

- : Decent PLC level

- : Excellent PLC level

PLC level indicator

- : Relocate the EnerBox2 on another place.

- : Go on to next step

Briefly press the AP button The LED is off