Install Manual

AC Module System Installation Manual

Rev. 1.0

Step 6. Create a system

Creating a system and registering the EnerBox2 is possible by using EnerVu2(web application) or LG EnerVu2

Professionals(mobile application).

 Using a laptop or a desktop

A. Access and sign in the EnerVu2. URL : https://enervu.lg-solar.com

B. To register the EnerBox2 that you have just installed on the site, press the ＂Create a System" button in left

global navigation bar.

C. Following the Activation Checklist, fill in the System & Owner information.

D. If you click the ‘Save’ button, an invitation e-mail will be sent to the home owner's email typed in Owner Info.

E. Fill in the EnerBox2 serial number and press check button. The serial number is attached on the EnerBox2.

- If the server says “This EnerBox is not verified on EnerVu. Please proceed after installation is completed”,

check the internet connection of the EnerBox2.

F. Make sure that the inserted serial number is correct. If it is not, edit the number. If the number of ‘Detected

AC modules’ and the number of ‘Total AC modules’ are not equal, modify the number of Total AC modules or

click Check Module to edit.

If the number of Detected AC modules is smaller than the number of Total AC modules, ‘Start Scan’ needs to

be performed.

If the number of Detected AC modules is larger than the number of Total AC modules, delete AC modules not

in your MAC ID list. After checking the Grid profile, go to ‘Design the Array’.