Install Manual

AC Module System Installation Manual

Rev. 1.0

Step 7. Design the Array in EnerVu2 using a laptop or a desktop

( It is not available on the mobile application )

A. Click ‘Go to Design’.

B. Choose a background image in order to decorate the array builder. For an example, you can use a picture of

rooftop having a great view for getting a pleasure when you see the array in the website. You can adjust the

opacity, scale, and rotation of the selected image. If you don’t want to put it on the background of ‘Array

Builder’, you can skip it.

C. Edit the modules by using shortcut keys and edit tools to describe the AC module system. After rotating an

array, please adjust the position of the array then save the changes. It might be possible that the array after

rotation is overlaid on another array.

D. You can design arrays that will be presented in the system of dashboard. After creating an array for AC

modules, drag the MAC on the array for mapping. The maximum allowable number of AC modules is 600. If

you want to register more than 600 AC modules, please create multiple systems on the website.

E. Confirm whether all of MAC addresses and AC modules are properly placed with a reference of ‘AC module

Installation map’.

F. Save and terminate the Array builder.

※ At Step 7, recommended display resolution of your laptop or desktop is 1680 × 1050 and higher

than the resolution. If it is lower than 1680 × 1050, it might be uncomfortable to build an array

because you have to scroll the window to right or left.

※ After rotating an array, please adjust the position of the array then save the changes. It might be

possible that the array after rotation is overlaid on another array.

※ Array build step is only available on the website. Mobile application does not provide the tool for

editing arrays.

Hold the MAC.

Then drag it on the array