Install Manual

AC Module System Installation Manual

Rev. 1.0

7 Maintenance

• To prevent a risk of burn, do not touch the metal part of the AC module in operation with bare

hands.

• To prevent the risk of overvoltage, do not disconnect the cable connector in operation.

• Ensure that AC cable connectors are tightly connected and the wiring properly works.

• Conduct periodic inspection of the AC modules for any damages on front glass, back sheet, frame, AC junction box,

micro inverters, circuit breakers, conduits, Earth Grounding path, or external electrical connections.

• No aggressive and abrasive cleansers or chemicals such as alkali chemicals including ammonia based solution should

ever be used on the treated front glass.

• Always wear rubber gloves for electrical insulation while maintaining, washing or cleaning panels.

• Deposits of foreign material on the frame surface can be cleaned using a wet sponge or cloth and dried in air or by using

a clean chamois.

• All works related to repair shall be carried out by the approved installer for the safety of workers and systems.

• Do not use any kind of oil or lubricant on the module's any parts, It can defect the AC Module.