LAC2900N.
Table of Contents 3 4 5 6 7 8 9 2 Safety Note Front Panel About Detachable Control Panel Installation Basic installation Removing the existing receiver unit ISO-DIN installation Connection Basic operation Mute Using the EQ Adjusting the sound level XDSS+(Extreme Dynamic Sound System) Checking the clock Setting the clock Listening to a CD Pause or restart a CD Search for a section within a track / file Skip to another track / file Intro scan Repeat Shuffle MP3/WMA Track -10 / +10 MP3/WMA Folder UP/DOWN C
Safety Note CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION : This product uses a Laser System. To ensure proper use of this product, please read this owner’s manual carefully and retain it for future reference. Should the unit require maintenance, contact an authorized service center. Performing controls, adjustments, or carrying out procedures other than those specified herein may result in hazardous radiation exposure. To prevent direct exposure to laser beam, do not try to open the enclosure.
Front Panel 1 2 SOURCE [SRC] • Volume • [MUTE] • Power [PWR] 3 Skip / Search / Seek / Tune B?+ 4 Select [SEL] / [MENU] 5 CD slot 6 Display window 7 Extreme Dynamic Sound System [XDSS+] 8 Display [DISP] 9 Eject Z 10 Release 4 CAR CD/MP3/WMA Receiver U/AS] 11 • Auto Store [U u/PS] • Preset Scan [u u • MP3/WMA Track +10/-10 U/u u • Folder Up/Down U/u 12 AUX in 13 Preset Station [1~6] 14 Shuffle [SHF] 15 Repeat [RPT] 16 Intro Scan [INT] 17 Play/Pause B/X 18 [BAND] 19 Equalizer [EQ] 20 Skip / Search / Seek
About Detachable Control Panel Attaching the control panel 1 2 Detaching the control panel Align the left side of the panel with the stopper. Push the right side or panel into the unit until it clicks. 1 1 2 2 3 4 Press the “ ” (RELEASE) to open the control panel. Hold the right part of the control panel. Pull out the control panel. Place the control panel in the supplied protective case. 2 3 1 Caution • The control buttons may not work properly if the control panel is not attached properly.
Installation ISO-DIN Installation Basic Installation 1 2 3 4 Remove the existing receiver unit. Make the necessary connections. Install the installation sleeve. Install the unit into the installation sleeve. Control panel If there is already an installation sleeve for the receiver unit in the dashboard, it must be removed.
Connection Before connecting, make sure that the ignition switch is set to OFF, and remove the battery # terminal to avoid short circuits.
Adjusting the sound level Basic Operation ON PLAYER 1. Turn the unit on. PWR 2. Select a source. SRC 3. Adjust the volume. Rotate PWR Press SEL repeatedly to select the mode you want to adjust from VOL(volume), BAL(left/right speaker), and FAD(front/rear speaker). To adjust sound quality, rotate PWR. Note When EQ and XDSS+ is set to “Off”, you can also adjust the sound level (BAS(bass), MID(middle), TRB(treble)) settings.
Shuffle Listening to a CD ON PLAYER 1. Insert a CD. 2. Adjust the volume. Rotate PWR Press or press and hold SHF on the player. Each files in the current selected folder ( SHF) or all of the tracks/files (SHF) on the disc is played randomly. Press SHF again to cancel it. Note During random playback, if you press -?b , you won’t go back to the previous track. Listening to a CD - more you can do MP3/WMA Track -10 / +10 Pause or restart a CD (If there is no folder or one folder.
Listening to the radio Connecting an Auxiliary Equipment ON PLAYER 1. Select a source to tuner. SRC 2. Select a band. BAND 3. Auto seek. Manual seek. -?b / B?+ Press and hold -?b / B?+ Auxiliary input MP3 Player, etc Listening to the radio - more you can do ON PLAYER 1. Select a source to AUX. Auto search memory Press U/AS. The six strongest broadcast frequencies will be stored under preset button 1-6 in the order of their signal strength. To cancel, press U/AS.
Specifications Changing settings ON PLAYER 1. Select one item. Press 2. Select a source. Rotate PWR 3. Finish the setting . Press MENU MENU AUX (Auxiliary) ON / OFF It is possible to use auxiliary equipment with this unit. Activate the auxiliary setting when using auxiliary equipment connected to this unit. AUX (Auxiliary) 00dB / +6dB Only when you set AUX to ON as switching sources, you can adjust the volume level of each source to prevent radical changes in volume.
Troubleshooting Symptom General Power doesn’t turn on / The unit doesn’t operate. Cause Leads and connectors are not properly. The fuse is blown. CD Radio Noise and other factors are causing the builtin microprocessor to operate incorrectly. No sound is heard / The vol- Cables are not connected correctly. ume level will not rise. There’s audio skipping. This unit is not firmly secured. The playback is not possi The disc is dirty. ble. The loaded disc is of a type this unit cannot play.
Web site Telephone êÓÒÒËfl ru.lgservice.com 8-800-200-7676 ì͇ªÌ‡ ua.lgservice.com 8-800-303-0000 аза стан kz.lgservice.com 8-8000-805-805 Å·ÛÒ ru.lgservice.com 8-820-0071-1111 Latvija lv.lgservice.com 8-0003-271 Lietuva lt.lgservice.com 8-800-30-800 Eesti ee.lgservice.
