OWNER’S MANUAL Sound Bar Please read this manual carefully before operating your set and retain it for future reference. LAS350B (LAS350B, S35A1-W) LAC450B (LAC450B, S35A1-W) www.lg.
Getting Started Safety Information 1 CAUTION Getting Started RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
Getting Started This device is equipped with a portable battery or accumulator. Disposal of your old appliance 1. All electrical and electronic products should be disposed of separately from the municipal waste stream via designated collection facilities appointed by the government or the local authorities. 2. The correct disposal of your old appliance will help prevent potential negative consequences for the environment and human health. 3.
Getting Started Declaration of Conformity 1 Getting Started Hereby, LG Electronics European Shared Service Center B.V., declares that this Wireless Sound Bar is compliant with the essential requirements and other relevant provisions of Directive 1999/5/EC. The complete Declaration of Conformity may be requested through the following postal address: LG Electronics European Shared Service Center B.V.
Table of Contents Table of Contents 20 22 22 22 23 23 23 – Install “Music Flow Bluetooth” App onto Your BLUETOOTH Device – Activate BLUETOOTH with “Music Flow Bluetooth” App Sound adjustment – Setting sound effect – Adjust volume level automatically – Adjust the Treble/Bass – Adjust the woofer level settings – Night mode 4 Troubleshooting 24 Troubleshooting 5 Appendix 26 27 29 29 Trademarks and licenses Specifications Maintenance – Handling the unit 21 1 Getting Started 2 6 6 6 6 7 8 8 9 9
Getting Started Unique features 1 Auto power down Getting Started This unit will turn off by itself for energy saving consumption. Accessories Please check and identify the supplied accessories. Designs and specifications of the accessories are subject to change without prior notice. Portable In Listens to music from your portable device.
Getting Started Remote control 7 • • • • • • • • • • a • • • • • • • • • • 1 (Power) : Switches the unit ON or OFF. / Switches to the standby mode. OPTICAL : Changes input source to OPTICAL. VOL o/p : Adjusts speaker volume. : Adjusts sound level of Treble or Bass. WOOFER LEVEL W/S : Adjusts sound level of Sub-woofer. h: Changes input source to Bluetooth. LG TV : Changes input source to LG TV PORT.IN : Changes input source to Portable.
Getting Started Front panel 1 Getting Started A Remote sensor C 1/! (Standby/On) B Display window D F (Function) Selects the function and input source. Standby LED It lights up in red on standby mode. E p/o (Volume) Adjusts volume level. Rear panel A Power cord C OPT. IN : Optical input B SUB WOOFER(4Ω) Connector D PORT.
Getting Started Installing the sound bar Installing the cover foot You can extend the height of the unit by using cover foot (height : 17 mm) Place the unit in front of the TV and connect it to the device you want. (Refer to pages 12 - 13.) 1. Turn the unit upside down. 2. Peel off a sticker attached to the cover foot. Then place it on the existing foot of the unit. 3. Press the cover foot with adequate force to get it firmly fixed.
Getting Started Mounting the main unit on a wall 1 1. Match the TV’s BOTTOM EDGE of Wall bracket install guide with the bottom of TV and attach to the position. TV You can mount the main unit on a wall. Getting Started 2. When you mount it on a wall (concrete), use the wall plugs. You should drill some holes. A guide sheet (Wall bracket install guide) is supplied to drill. Use the sheet to check the point to drill.
Getting Started 4. Fix the brackets with screws (A) as shown in the illustration below. 11 6. Fix the unit with the screws firmly. 1 ,,Note Screws (A) and Wall Plugs are not supplied for mounting the unit. We recommend the Hilti (HUD-1 6 x 30) for the mounting. 5. Put the unit on the brackets to match screw holes on the bottom of the unit. >>Caution yy Do not install this unit upside down. It can damage the parts of this unit or be the cause of personal injury.
Connecting Connecting the subwoofer Connecting to your TV Using an OPTICAL cable Attaching the subwoofer to the unit 2 1. Connect the OPT. IN jack on the back of the unit to OPTICAL OUT jack on the TV using an OPTICAL cable. Connecting To connect the cable to the unit, press each plastic finger pad to open the connection terminals on the unit. Insert the wire and release the finger pad.
Connecting Optional equipment connection 13 PORTABLE IN connection OPTICAL IN connection Connect an optical output jack of external devices to the OPTICAL IN jack. To the optical output jack of external device 1. Connect the OPTICAL IN jack on the back of the unit to optical out jack of your TV (or digital device etc.) 2. Select the input source to OPTICAL by pressing OPTICAL on the remote control or F on the unit until the function is selected. 3. Listen to sound.
Operating Operations Sleep timer setting DRC (Dynamic Range Control) Press SLEEP repeatedly to select the desired time period options (in minutes): Make the sound clear when the volume is turned down and prevent sudden increase of sound (Dolby Digital only). Set to [DRC ON] by using DRC. Turn off the sound temporarily Press 3 (Mute) to mute your unit. You can mute your unit, for example, to answer the telephone, “MUTE” is displayed in the display window.
Operating 15 Using your TV remote control Auto power down You can control some functions of this unit by your TV remote control even by other company’s product. Controllable functions are volume up/down and mute. This unit will be off itself to save electric consumption in the case main unit is not connected to external device and is not used for 20 minutes. Press and hold INFO on the remote control for about 3 seconds. “ON - TV REMOTE” appears and you can control this unit by your TV remote control.
Operating AUTO POWER On/Off Auto function change This unit automatically turns on by an input source : Optical, LG TV or Bluetooth. This unit recognizes input signals such as optical, Bluetooth and LG TV and then changes suitable function automatically. When you turn on your TV or an external device connected to this unit, this unit recognizes the input signal and select the suitable function. You can hear the sound from your device.
Operating LG Sound Sync 17 With wired connection 1. Connect your LG TV to the unit by using an optical cable. You can control some functions of this unit by your TV's remote control with LG Sound Sync. It is compatible with the LG TV that is supported LG Sound Sync. Make sure of the LG Sound Sync logo on your TV. Controllable function by LG TV's remote control : Volume up/down, mute Optical cable Refer to the TV's instruction manual for the details of LG Sound Sync.
Operating 1. Turn on the unit by pressing 1 (Power) on the remote control. Using BLUETOOTH® technology 2. Select LG TV function by using LG TV on the remote control or F on the unit until the function is selected. About BLUETOOTH With wireless connection 3.
Operating Listening to music stored on the BLUETOOTH devices Pairing your unit and BLUETOOTH device Before you start the pairing procedure, make sure the Bluetooth feature is turned on in to your Bluetooth device. Refer to your Bluetooth device’s user guide. Once a pairing operation is performed, it does not need to be performed again. 2. Operate the Bluetooth device and perform the pairing operation.
Operating ,,Note yy The sound may be interrupted when the connection interfered by the other electronic wave. Install “Music Flow Bluetooth” App onto Your BLUETOOTH Device yy You may not control the Bluetooth device with this unit. There are two ways to install “Music Flow Bluetooth” App onto Your Bluetooth Device. yy Depending on the type of the device, you may not be able to use the Bluetooth function. yy You can enjoy wireless system using phone, MP3, Notebook, etc..
Operating Install “Music Flow Bluetooth” App through “Google Android Market (Google Play Store)” 1. Tap the “Google Android Market (Google Play Store)” icon. 2. In the search bar, type in the “Music Flow Bluetooth” and search it. 3. In the search result list, find and tap “Music Flow Bluetooth” to start downloading Bluetooth app. 4. Tap an icon for installation. 5. Tap an icon for downloading. ,,Note yy Make sure that your Bluetooth device is equipped with “Google Android Market (Google Play Store)”.
Operating Sound adjustment Setting sound effect This unit supports Auto volume function that automatically adjusts the volume level. This system has a number of pre-set surround sound fields. You can select a desired sound mode by using SOUND EFFECT. When the output sound is too loud or too low, press AUTO VOLUME on the remote control. So you can enjoy the sound with appropriate levels. Press SOUND EFFECT repeatedly or press SOUND EFFECT and then, press A/D.
Operating 23 Adjust the Treble/Bass You can adjust the sound level of Treble, Bass as your preference. TREBLE/BASS : - 5 dB to 5 dB 1. Press BASS button repeatedly to select TREBLE or 2. Press VOL o/p to adjust the sound level. Adjust the woofer level settings You can adjust the sound level of woofer from - 20 dB to + 6 dB. Night mode This function is useful when you want to watch movies at low volume late at night. Press button on the remote control. So you can activate Night mode.
Troubleshooting Troubleshooting PROBLEM CAUSE & CORRECTION yy Turn off the power of this unit and the connected external device (TV, Woofer, DVD-player, Amplifier, etc.) and turn it on again. The unit does not work properly. yy Disconnect the power cord of this unit and the connected external device (TV, Woofer, DVD-player, Amplifier, etc.) and then try connecting again. yy Previous setting may not be saved when device power is shut off. No Power yy The power cord is unplugged.
Troubleshooting 25 PROBLEM CAUSE & CORRECTION Check the details below and adjust the unit according to them. yy Switch [ON] state of DRC function to [OFF] by using remote controller. When you feel the output sound of the unit is low. yy With the sound bar connected with TV, change the AUDIO DIGITAL OUT setting on TV Setup Menu from [PCM] to [AUTO] or [BITSTREAM].
Appendix Trademarks and licenses All other trademarks are trademarks of their respective owners. Bluetooth wireless technology is a system which allows radio contact between electronic. Connecting individual devices under Bluetooth wireless technology does not incur any charges. A mobile phone with Bluetooth wireless technology can be operated via the Cascade if the connection was made via Bluetooth wireless technology. Manufactured under license from Dolby Laboratories.
Appendix 27 Specifications General (LAS350B/LAC450B) Power requirements Refer to the main label on the unit. Refer to the main label on the unit. Power consumption Networked standby : 0.5 W (If all network ports are activated.) Dimensions (W x H x D) 880 mm x 59 mm x 90 mm Net Weight (Approx.) 1.9 kg Operating temperature 5 °C to 35 °C Operating humidity 5 % to 90 % Input/Output OPT. IN 3 V (p-p), Optical jack x 1 PORT. IN 0.5 Vrms (3.
Appendix Bluetooth Codec SBC yy Designs and specifications are subject to change without prior notice.
Appendix 29 Maintenance Handling the unit When shipping the unit Please save the original shipping carton and packing materials. If you need to ship the unit, for maximum protection, re-pack the unit as it was originally packed at the factory. Keeping the exterior surfaces clean yy Do not use volatile liquids such as insecticide spray near the unit. yy Wiping with strong pressure may damage the surface. yy Do not leave rubber or plastic products in contact with the unit for a long period of time.