LAC4700_ENG_MOSCOW_CI_NEW_0741 LAC4700/ 4705/ 4710/ 4715 ENGLISH CAR CD/MP3/WMA Receiver Read the manual carefully before using the unit The working life of this product is 7 years since the date of purchase. RUSSIAN Ä‚ÚÓÏÓ·ËθÌ˚È CD/MP3/WMA-ÂÒË‚Â è‰ ÚÂÏ Í‡Í ËÒÔÓθÁÓ‚‡Ú¸ ‰‡ÌÌÓ ÔËÒÔÓÒÓ·ÎÂÌËÂ, ‚ÌËχÚÂθÌÓ ÔÓ˜ËÚ‡ÈÚ êÛÍÓ‚Ó‰ÒÚ‚Ó ÔÓ ˝ÍÒÔÎÛ‡Ú‡ˆËË ëÓÍ ÒÎÛÊ·˚ ÔË·Ó‡ - 7 ÎÂÚ ÒÓ ‰Ìfl Ô‰‡˜Ë ÚÓ‚‡‡ ÔÓÚ·ËÚÂβ.
Safety note CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT SPLIT COVER(OR BACK) NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with the arrowhead symbol, within an equilateral triangle is intended to alert the user about the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock.
• A defective or soiled disc inserted into unit can cause sound to drop out during playback. • Handle the disc by holding its inner and outer edges. • Do not touch the surface of the unlabeled side of the disc. Do not stick paper or tape etc. on the surface. Do not expose the disc to direct sunlight or excessive heat. 8 cm This unit cannot play 8cm disc (use 12cm disc only). • Clean the disc before playback. Wipe the disc from the center outward with a cleaning cloth.
Table of contents Safety note . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-3 Table of contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 Before use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 Control panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Control panel 1 2 [SOURCE] i • Skip / Search I/i I i • Seek/ Tune /i • Auto Store [U/AS] • Preset Scan [u/PS] u • MP3 Track +10/-10 U/u MP3 WMA u • Folder Up/Down U/u MP3 3 WMA Remote Sensor (Optional) 4 5 6 7 8 9 • Volume • [MUTE] • Power [PWR] [DISP] DISC SLOT Release AUX In [AUX ] • Equalizer [EQ] • Extreme Dynamic Sound System [XDSS] 10 11 12 13 14 15 16 17 18 Preset Station [1-6] Shuffle [SHF] Repeat [RPT] Intro Scan [SCAN] Play/ Pause BX [BAND] Select [SEL] [MENU] EJECT Z Remote control (
Battery Installation 1 2 3 Pull out the battery holder with a sharp product like a ball point pen. Put the battery with and correctly on the battery holder. Push the battery holder back into its original position. Note • Use only one CR2025 (3V) lithium battery. • Remove the battery if the remote control is not used for a long period of time. • Do not leave the product in a hot or humid place. • Do not handle the battery with metallic tools. • Do not store the battery with metallic materials.
Connection diagram Before connecting, make sure that the ignition switch is set to OFF, and remove the battery # terminal to avoid short circuits.
A From antenna B To the wiring of the vehicle colors of leads. • BLACK: This lead is for the ground connection. • ORANGE: This lead is for the phone line connection. • PINK: This lead is for the dimmer line connection. • RED: This lead is for connection to the power supply terminal when the ignition switch is set to ACC. • YELLOW: This lead is for connection to the battery (back-up) terminal from which power is always supplied. • BLUE: This lead is for the power antenna connection.
Basic operation Turning the unit on Press MUTE/PWR (POWER/ button. on the remote control) or any other button except for eject Note When you insert the CD in the CD slot, the unit turns on. Turning the unit off Press and hold MUTE/PWR (POWER/ on the remote control). Selecting a source Press SOURCE repeatedly to select a source. The indicator lights up in the following order. TUNER → CD → AUX → TUNER... Note You cannot select a source if a CD is not inserted.
AUX (Auxiliary) ON / OFF It is possible to use auxiliary equipment with this unit. Activate the auxiliary setting when using auxiliary equipment connected to this unit. AUX ON When using a auxiliary equipment. AUX OFF When not using a auxiliary equipment. AUX (Auxiliary) 00db / +6db You can adjust the volume level of each source to prevent radical changes in volume when switching between sources.
Adjusting the sound level 1 2 Press SEL (MENU/SEL on the remote control) repeatedly to select the mode you want to adjust from volume, bass, middle, treble, balance and fader. The indicator lights up in the following order. VOL t BAS t MID t TRB t BAL t FAD Rotate the MUTE/PWR (Press VOLUME on the remote control) to adjust the sound quality. Indication Turn right Turn left VOL BAS Increase the volume level. Decrease the volume level. Increase the bass level. Decrease the bass level.
AUX operation Playing an Auxiliary Equipment You can connect Auxiliary Equipment to this unit. Connect one to the external device jack using the line input cable (not supplied), and the other to the AUX input jack on the control panel. Auxiliary input Line input cable MP3 Player, etc 1 2 3 Press SOURCE to select the AUX as source. AUX IN appears in the display. Turn on the connected Auxiliary Equipment and start playing the source. Adjust the volume.
Note • Up to 18 FM stations, 6 for each of three FM bands and 6 MW(AM) stations can be stored in the memory. • When a station is stored on the preset numbers on which another station of the same band has already been preset, the previously preset station is automatically erased. Auto search memory This function lets you automatically store the 6 strongest broadcast frequencies. 1 2 Press U/AS.
Intro scan The first 10 seconds of each tracks/files (SCAN) or each files in the current selected folder ( SCAN) on the disc are played. 1 2 Press SCAN. – SCAN MP3 WMA (or SCAN CD ) appears on the display window. Press and hold SCAN for about 2 seconds during playback. – SCAN appears on the display window. MP3 WMA Press SCAN again. – SCAN or SCAN disappear from the display window and the intro scan is cancelled.
To go to a particular quickly (+10/-10 steps) MP3 WMA (If there is no folder or one folder.) U on remote control) to skip to the next 10 track, and press u/PS (u u on remote Press U/AS (U control) to skip to the previous 10 track. To skip to the next or previous folder MP3 WMA (If there are more than two folders.) U on remote control) to skip to the next folder, and press u/PS (u u on remote Press U/AS (U control) to skip to the previous folder.
Troubleshooting Sy Co : Symptom / : Correction Ca Ca The loaded disc is of a type this unit cannot play. Co Check what type the disc. : Cause Sy Power doesn’t turn on. / The unit doesn’t operate. Ca Leads and connectors are not properly connected. Co Confirm once more that all connections are correct. Ca The fuse is blown. Co Rectify the problem that caused the fuse to blow, and then replace it. Be very sure to install the correct fuse with the same rate.
