User manual

11
Adjusting the sound level
1 Press SEL (MENU/SEL on the remote control) repeatedly to select the mode you want to
adjust from volume, bass, middle, treble, balance and fader.
The indicator lights up in the following order.
VOL t BAS t MID t TRB t BAL t FAD
2 Rotate the MUTE/PWR (Press VOLUME on the remote control) to adjust the sound
quality.
Note
When EQ or XDSS+ is set to “Off”, you can adjust the sound level (BAS, MID, TRB)
settings.
XDSS+ (Extreme Dynamic Sound System)
1 Press and hold EQ/XDSS
XDSS+ : Improve the treble, bass sound.
2 To cancel, press and hold EQ/XDSS again.
Setting the clock
1 Press the DISP and then, press and hold DISP for more 1 second.
2 Press the
II
to adjust the hour.
3 Press the
ii
to adjust the minute.
Checking the clock
You can see the clock pressing DISP (DISP. on the remote control).
Turn right Turn left
VOL
Increase the volume level.
Decrease the volume level.
BAS
Increase the bass level.
Decrease the bass level.
MID
Increase the middle level.
Decrease the middle level.
TRB
Increase the treble level. Decrease the treble level.
BAL
Decrease the level of the
left speaker(s).
Decrease the level of the right
speaker(s).
FAD
Decrease the level of the front
speaker(s).
Decrease the level of the rear
speaker(s).
Indication