User manual

17
AUX operation
Auxiliary input
MP3 Player, etc
1 Press SOURCE to select the AUX as source.
AUX IN appears in the display.
2 Turn on the connected Auxiliary Equipment and start playing the source.
3 Adjust the volume.
Note
• Before operating the Auxiliary Equipment using the following procedure, select the external
input correctly. (Refer to the page 12 for details.)
• If the input level of the Auxiliary Equipment connected to the AUX input jack is not high
enough, adjust the input level properly. (Refer to the page 12 for details.)
Playing an Auxiliary Equipment
You can connect Auxiliary Equipment to this unit.
Connect one to the external device jack using the line input cable (not supplied), and the
other to the AUX input jack on the control panel.
Line input cable