LAC6710R_ENG_MOSCOW_CI_NEW LAC6700R/6710R ENGLISH CAR CD/MP3/WMA Receiver Please read this instruction booklet carefully and completely before installing, operating or adjusting this product. The working life of this product is 7 years since the date of purchase. RUSSIAN Ä‚ÚÓÏÓ·ËθÌ˚È CD/MP3/WMA-ÂÒË‚Â èÓʇÎÛÈÒÚ‡, ‚ÌËχÚÂθÌÓ Ë ‰Ó ÍÓ̈‡ ÔÓ˜ËÚ‡ÈÚ ̇ÒÚÓfl˘ËÈ ·ÛÍÎÂÚ Ò ËÌÒÚÛ͈ËflÏË Ô‰ ÛÒÚ‡ÌÓ‚ÍÓÈ, ÔÓθÁÓ‚‡ÌËÂÏ ËÎË Ì‡ÒÚÓÈÍÓÈ ˝ÚÓ„Ó ËÁ‰ÂÎËfl. ëÓÍ ÒÎÛÊ·˚ ÔË·Ó‡ - 7 ÎÂÚ ÒÓ ‰Ìfl Ô‰‡˜Ë ÚÓ‚‡‡ ÔÓÚ·ËÚÂβ.
Safety note CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT SPLIT COVER(OR BACK) NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with the arrowhead symbol, within an equilateral triangle is intended to alert the user about the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock.
• A defective or soiled disc inserted into unit can cause sound to drop out during playback. • Handle the disc by holding its inner and outer edges. • Do not touch the surface of the unlabeled side of the disc. Do not stick paper or tape etc. on the surface. Do not expose the disc to direct sunlight or excessive heat. 8 cm This unit cannot play 8cm disc (use 12cm disc only). • Clean the disc before playback. Wipe the disc from the center outward with a cleaning cloth.
Table of contents Safety note . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-3 Table of contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 Before use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 Control panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Control panel 1 2 17 1 2 3 4 16 MP3 13 12 11 5 WMA WMA Remote Sensor • Volume • [MUTE] • Power [PWR] 6 7 8 10 12 13 14 15 • Traffic Announcement [TA] • Programme Type [PTY] 6 • Equalizer [EQ] • Extreme Dynamic Sound System [XDSS] • Bass Reverb Blaster [BRB] 7 Display [DISP] 8 Release/Eject 9 USB Slot 10 Preset Station [1~6] 11 Shuffle [SHF] u • Folder Up/Down U/u 3 4 14 15 [SOURCE] i • Skip / Search I/i i • Seek/ Tune I/i U/AS] • Auto Store [U u/PS] • Preset Scan [u u • MP3 Track +10/-
Battery Installation 1 2 3 Remove the battery holder with a sharp product like a ball point pen. Install the battery on the battery holder. Install the battery holder back into its original position. Note • Use only one CR2025 (3V) lithium battery. • Remove the battery if the remote control is not used for a long period of time. • Do not leave the product in a hot or humid place. • Do not handle the battery with metallic tools. • Do not store the battery with metallic materials.
Connection diagram Before connecting, make sure that the ignition switch is set to OFF, and remove the battery # terminal to avoid short circuits. B 8 6 DIMMER (PINK) A 7 2 4 6 8 5 7 2 4 6 8 B B B B B B B B 2 GROUND(-) (BLACK) A 5 To Speaker To Vehicle A PHONE MUTE (ORANGE) A 3 A B A 1 1. 2. 3. 4. 5. 6. 7. 8.
• YELLOW: This lead is for connection to the battery (back-up) terminal from which power is always supplied. • BLUE: This lead is for the power antenna connection. • BLUE/WHITE: This lead is for the remote amplifier on connection. C Speaker Connections 1 2 3 4 5 6 7 8 REAR R FRONT R FRONT L REAR L Connecting to Auxiliary Equipment (Optional) Connect the AUDIO OUTPUT jack of this unit to the AUDIO INPUT jack of the Auxiliary Equipment.
Selecting a source Press SOURCE repeatedly to select a source. The indicator lights up in the following order. TUNER → CD → USB → TUNER... Note You cannot select a source if is not ready. Adjusting the volume Rotate MUTE/PWR (Press VOLUME on the remote control) to adjust the sound level. Note When you turn the unit off, the current volume level is automatically memorized. Whenever you turn the unit back on, it will operate at the memorized volume level.
PI (Programme Identification) SOUND / MUTE PI SOUND : If the sound of a station with different PI is heard intermittently, the receiver mutes the sound after 1 second. PI MUTE : If the sound of a station with different PI is heard intermittently, the receiver mutes the sound right now. DEMO ON / OFF You can change the initial indication on the display to information name (function name, EQ name, etc...) while listen to a source. DEMO ON Displays information name while listening to source.
Indication Turn right Turn left VOL BAS Increase the volume level. Decrease the volume level. Increase the bass level. Decrease the bass level. MID TRB BAL Increase the middle level. Decrease the middle level. Increase the treble level. Decrease the treble level. Decrease the level of the left speaker(s). Decrease the level of the right speaker(s). FAD Decrease the level of the front speaker(s). Decrease the level of the rear speaker(s).
Note • Up to 18 FM stations, 6 for each of three FM bands and 6 MW(AM) stations can be stored in the memory. • When a station is stored on the preset numbers on which another station of the same band has already been preset, the previously preset station is automatically erased. Auto search memory This function lets you automatically store the 6 strongest broadcast frequencies. 1 Press U/AS until “AUTO STORE” appears.
Note RDS is only available for FM reception. TA (Traffic Announcement) function TA reception allows the unit to switch temporarily to a Traffic Announcement from the current source (another FM station, CD, or other connected components). To switch the TA (Traffic Announcement) function on or off, press TA/PTY. • TA ON Traffic programs and announcements can be automatically received using TP/TA features. • TA OFF Traffic programs and announcements can not be received using TP/TA features.
Repeat The current selected tracks/files (1 RPT) or folder ( 1 2 3 RPT) on the disc is played repeatedly. Press RPT during playback. – 1 RPT appears on the display window. CD MP3 WMA Press and hold RPT for about 2 seconds during playback. – RPT appears on the display window. MP3 WMA Press RPT again. – 1 RPT or RPT disappear from the display window and the repeat mode is cancelled. Shuffle All of the tracks/files (SHF) or the current selected folder ( SHF) on the disc is played randomly.
USB operation If the plug length of the USB device is under 10mm, the USB device may not be correctly inserted or a connection failure may occur. Playing a USB device 1 2 Connect one end to the USB port on your USB device and then plug the other end into your unit's USB port. After “USB CHECK” appears, playback starts automatically. Note The method of files recorded in a USB memory device is the same as when using a DISC.
Troubleshooting Sy Co : Symptom / : Correction Ca Ca The loaded disc is of a type this unit cannot play. Co Check what type the disc. : Cause Sy Power doesn’t turn on. / The unit doesn’t operate. Ca Leads and connectors are not properly connected. Co Confirm once more that all connections are correct. Ca The fuse is blown. Co Rectify the problem that caused the fuse to blow, and then replace it. Be very sure to install the correct fuse with the same rate.