ENGLISH DEUTSCH FRANÇAIS OWNER’S MANUAL NEDERLANDS SoundPlate 340 SoundPlate 341 SLOVENŠČINA ITALIANO ESPAÑOL ΕΛΛΗΝΙΚΑ PORTUGUÊS Please read this manual carefully before operating your set and retain it for future reference. SOUNDPLATE340 SOUNDPLATE341 www.lg.com LAP340-NB_DDEULLF_ENG.
1 2 Getting Started Getting Started Safety Information 1 CAUTION Getting Started RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
Getting Started This device is equipped with a portable battery or accumulator. Disposal of your old appliance 1. When this crossed-out wheeled bin symbol is attached to a product it means the product is covered by the European Directive 2002/96/EC. 2. All electrical and electronic products should be disposed of separately from the municipal waste stream via designated collection facilities appointed by the government or the local authorities. 3.
Getting Started Europe Notice 1 Getting Started LG Electronics hereby declares that this/these product(s) is/are in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC, 2004/108/EC, 2006/95/EC, 2009/125/EC and 2011/65/EU. Please contact to the following address for obtaining a copy of the DoC (Declaration of Conformity). Contact office for compliance of this product : LG Electronics Inc.
Table of Contents 5 Table of Contents 1 Getting Started 2 6 6 6 7 7 8 10 Safety Information Unique features Introduction Accessories Front panel Rear panel Remote control Setting up the unit 2 Operating 13 13 13 14 15 15 16 18 Basic operations – Optical input operation – LG Sound Sync – AUTO POWER On/Off – Auto function change Using Bluetooth technology – Listening to music stored on the Bluetooth devices Using Bluetooth App – Install “LG Bluetooth Remote” App onto Your Bluetooth Device – Activate
Getting Started Unique features 1 LG Sound Sync Getting Started Controls volume level of this unit by the remote control of your LG TV that is compatible with LG Sound Sync. Accessories Please check and identify the supplied accessories. Designs and specifications of the accessories are subject to change without prior notice. Bluetooth Enjoys music from bluetooth device with simple connection.
Getting Started 7 Front panel 1 Getting Started A Remote sensor B LED indicator You can check the current state of the unit by the colour LED on it. Refer to the table below. LED Colour LED State Red Orange Off Green White Disconnected power cord On Standby Bluetooth paired Optical function selected LG sound sync (LG TV) paired Blink (Twice rapidly) CINEMA SOUND is off. - CINEMA SOUND is on.
Getting Started Remote control 1 Getting Started Switches the unit ON or OFF. Reduce the sound volume. Mutes or unmutes the sound. Select LG TV function. Turns on or off CINEMA SOUND function. Increase the sound volume. Select Optical function. Select Bluetooth function. ,,Note yy Once the unit is shut down to standby, please wait several seconds before trying to use remote again. yy When you press any button on the remote control, the red LED on the main unit blinks twice.
Getting Started Battery installation >>Caution 9 3. Put the battery cover on the remote control and turn it clockwise to close. Do not open the battery cover by using your finger. Or else, your nail could break. 1 Getting Started 1. Turn the battery cover counterclockwise by using a coin. Then take the battery cover. !Warning yy DO NOT INGEST BATTERY. CHEMICAL BURN HAZARD. 2. Insert and fix the battery with the minus (-) facing in the same direction as the minus (-) on the battery compartment.
Getting Started Setting up the unit 1 This unit is designed to be positioned under your TV. Getting Started Before setting up this system with your TV, make sure your TV's specifications. yy Weight >>Caution yy Do not try to set up this unit alone. It may need at least 2 persons to lift your TV. Otherwise it may result in a personal injury and/or property damages. yy Do not connect a CRT type TV to this unit.
Getting Started 2. Connect the optical cable and the power cord to the unit. 11 ,,Note You can arrange the cables of the unit. 1. Fix the cable holder with screws. 1 Getting Started 2. Arrange the cables as the below. 3. Connect another end of optical cable connecting the unit to your TV. 4. Place your TV on the centre of the unit. 5. Plug in the power cord of the unit. LAP340-NB_DDEULLF_ENG.
Getting Started >>Caution 1 yy Do not place your TV on the edge of this unit. Otherwise it may result in a personal injury and/or property damages. How to Affix the Ferrite Core (Optional) You may need to attach Ferrite core in order to reduce or eliminate any electrical interference. Getting Started yy If your TV is over recommended weight (max 38 kg) or has a Base larger in area than the Unit do NOT place TV on the Unit.
Operating Basic operations Optical input operation ,,Note -- Mute your TV. -- Select [Off ] on the TV sound setup menu not to output the sound through the TV. -- Select [Optical output] on the TV sound setup menu to listen to the sound through this unit. 1. Connect your TV to the unit by using an optical cable. (Refer to the pages 10 - 11.) 2. Turn on the unit by pressing 1 (Power) on the remote control. 3. Select OPTICAL function by using OPTICAL on the remote control.
2 Operating With wired connection AUTO POWER On/Off 1. Connect your LG TV to the unit by using an optical cable. (Refer to the pages 10 - 11.) This unit automatically turns on by an input source : Optical, LG TV or Bluetooth. 2.
Operating Auto power down This unit will turn itself off to save electric consumption in the case were main unit is not connected to external device and is not used for 20 minutes. 15 Using Bluetooth technology About Bluetooth Bluetooth is wireless communication technology for short range connection. This unit recognizes Bluetooth or optical signals and changes suitable function automatically.
Operating Listening to music stored on the Bluetooth devices Pairing this unit and Bluetooth device 2 Operating Before you start the pairing procedure, make sure the Bluetooth feature is turned on in to your Bluetooth device. Refer to your Bluetooth device’s user guide. Once a pairing operation is performed, it does not need to be performed again. 1. Select the Bluetooth function by using h on the remote control. Then the orange LED on the unit starts to blink. 2.
Operating Using Bluetooth App ,,Note Only Android OS is available to use “LG Bluetooth remote” app with this unit. About “LG Bluetooth Remote” App To enjoy more features, you are recommended to download and install free “LG Bluetooth Remote” app. Install “LG Bluetooth Remote” App onto Your Bluetooth Device There are two ways to install“ LG Bluetooth Remote” App onto Your Bluetooth Device. Install “LG Bluetooth Remote” App through QR code 1. Install “LG Bluetooth Remote” app through QR code.
Operating ,,Note yy “LG Bluetooth Remote” app will be available in the software version as follow; -- Android O/S : Ver 2.3.3 (or later) yy This unit does not support the multi-pairing. If this unit is already connected with other Bluetooth device, disconnect that device and then try again. 2 Operating yy If you use “LG Bluetooth Remote” app for operation, there would be some differences between “LG Bluetooth Remote” app and the supplied remote control. Use the supplied remote control as necessary.
Troubleshooting 19 Troubleshooting PROBLEM The unit does not work properly. No Power CAUSE & CORRECTION yy Turn off the power of this unit and the connected external device (TV, Woofer, DVD-player, Amplifier, etc.) and turn it on again. yy Disconnect the power cord of this unit and the connected external device (TV, Woofer, DVD-player, Amplifier, etc.) and then try connecting again. yy The power cord is unplugged. Plug in the power cord. yy Check the condition by operating other electronic devices.
Troubleshooting PROBLEM CAUSE & CORRECTION Check the details below and adjust the unit according to them. When you feel the output sound of the unit is low. yy With the unit connected with TV, change the AUDIO DIGITAL OUT setting on TV Setup Menu from [PCM] to [AUTO] or [BITSTREAM]. yy With the unit connected with Player, change the AUDIO DIGITAL OUT setting on Player Setup Menu from [PCM] to [PRIMARY PASS-THROUGH] or [BITSTREAM]. yy Change Audio DRC setting on Player setup menu to [OFF] state.
Appendix 21 Trademarks and licenses Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories. Manufactured under license under U.S. Patent Nos: 5,956,674; 5,974,380; 6,487,535 & other U.S. and worldwide patents issued & pending. DTS, the Symbol, & DTS and the Symbol together are registered trademarks & DTS 2.0 Channel is a trademark of DTS, Inc. Product includes software. © DTS, Inc. All Rights Reserved.
Appendix Specifications General Power requirements Refer to the main label on the unit. Power consumption Refer to the main label on the unit. Dimensions (W x H x D) (700 x 38.5 x 320) mm (With foot) Net Weight (Approx.) 3.8 kg Operating temperature 5 °C to 35 °C (41 °F to 95 °F) Operating humidity 5 % to 90 % Inputs DIGITAL IN (OPTICAL IN) 3.3 V (p-p), Optical jack Available Digital Input Audio Sampling Frequency 32 kHz, 44.
Appendix 23 Maintenance Handling the unit When shipping the unit Please save the original shipping carton and packing materials. If you need to ship the unit, for maximum protection, re-pack the unit as it was originally packed at the factory. Keeping the exterior surfaces clean yy Do not use volatile liquids such as insecticide spray near the unit. yy Wiping with strong pressure may damage the surface. yy Do not leave rubber or plastic products in contact with the unit for a long period of time.
LAP340-NB_DDEULLF_ENG.