Use and Care Manual

27
ENGLISH
INSTALLATION INSTRUCTIONS
COOKTOP INSTALLATION
(cont.)
3
Install the retainer brackets to the bottom of the
cooktop; then snug the bolts against the bottom
of the countertop as shown.
NOTE: The retainer brackets MUST be installed
to meet local codes or, in their absence, with
the National Electrical Code ANSI/NFPA No. 70,
latest edition.
LCE3010SB / LCE3610SB Radiant Cooktop
LCE3010SB Radiant Cooktop LCE3610SB Radiant Cooktop
Preferred installation
Alternative installation Alternative installation
Retainer brackets
Retainer brackets
Retainer brackets
Front
Front
Rear
Rear
Retainer brackets
Bolt
Countertop
Cooktop
Perform a final operational check of the cooktop,
making sure the cooktop powers on properly and
that each Cooking Zone operates correctly. Refer
to the Operating Instructions in this guide for
details.
MODEL AND SERIAL NUMBER LOCATION
The model and serial numbers are located on a
plate on the bottom of the cooktop. Please record
them in this guide; you will need them for warranty
registration.
FINAL CHECK
CAUTION
Do not touch cooktop glass or Cooking
Zones. They may be hot enough to cause
burns.