MFL67404601 LED DOWNLIGHT User Manual • Please read the 「Safety Precautions」 prior to use for your safety. • This manual is intended to prevent product damage and protect the user’s safety. • Place the manual at a place where it can be easily located by all potential users.
LED DOWNLIGHT Application of high-efficiency LED technology allows for tremendous energy reduction and its excellent heat management solution allows a life expectancy of 40,000 hours or more, making it an environmentally friendly product. Advantages Excellent Alternative Significant energy savings over 42% through replacement compared to conventional 52W downlight.
ction rs or Low Heat Generation Existing light Feeling comfortable and lowering cooling costs compared with conventional downlight. Dimming Control LG DOWNLIGHT Reduction in electricity consumption Dimming control system Up to 70% cost saving with its automatic dimming control by light sensor detection. 52W 56% 70% OFF 25% 50% 23W 15W Downlight LED Down LED Down(Dimming) ※ Dimming control is optional. The results may differ by operating condition.
Safety Precautions The meanings of the signs displayed on the product and user manual are as follows • T his sign indicates operations that might be dangerous and needs care with caution. For parts with this sign, user must read the manual carefully and follow instructions in order to avoid risks. • This sign displays risks involving electric shock under certain conditions. WARNING CAUTION • Violation of warnings may lead to serious injury or death.
ws n. in WARNING Do not store in a humid area. • Risk of product malfunctioning. If there is P.E. wire of the product, Perform grounding work. • Risk of electric shock. Be careful not to apply excessive force to the power cable. Block power when installing lighting device. Do not randomly connect the power polarities. (See page 9 of the User Manual) Use the device within a temperature range of 20°C to 50°C only. Do not install on unleveled ceilings.
WARNING Must fix the product properly on the ceiling. • Risk of product dropping and causing injury to the user. Do not use the product if impurities are present in the product or if the product is submerged. • R isk of accidents such as electric shock and product damage. Do not use if the product has been dropped or exposed to shock. Never disassemble the product. Do not stare directly at the lamp when turned on. If the lamp turns off by itself, do not disassemble the product.
WARNING Do not cover the device with clothes or paper, or place it near inflammables. • Otherwise, it may cause malfunction of the device or fire. Keep some distance between the lamp and the object to be illuminated. • If the illumination distance is too close or if the illumination is on a material's surface, this may cause discoloration or deformation of the object or cause fire. Do not use the device for purposes other than illumination.
Product Configuration and Information, Size Product Configuration Converter Diffuser Plate Main Body Spring Front Cover ※ Product Configuration may vary depending on the product. Product Information Category 3000K 4000K Product Verification 5000K 5700K 6 Inch 8W LD08X730M2C.D00***0 LD08X740M2C.D00***0 LD08X750M2C.D00***0 LD08X757M2C.D00***0 6 Inch 15W 23W LD15X730P2C.D00***0 LD25X730P2C.D00***0 LD15X740P2C.D00***0 LD25X740P2C.D00***0 LD15X750P2C.D00***0 LD25X750P2C.D00***0 LD15X757P2C.
Installation WARNING Make sure to turn off the main power switch off the installation space before connection. Connect so that the colors of the 3 power cables match. (LIVE: BROWN, NEUTRAL: BLUE, P.E.: GREEN/YELLOW) LIVE Interior wiring of the building NEUTRAL P.E. Product’s power cables 1 Drill and prepare the ceiling so that it can accommodate the product (refer to page 8 for product size). [Completed installation] 2 3 -9- Connect the 3 product cables to the interior wiring of the building.
Installation 4 6 Insert the power cable in such a way that the power cable does not get tangled between the ceiling surface and the product. Check to see if the product’s exterior surface is installed on the ceiling so that there is no gap between them. 5 7 - 10 - Sufficiently lift the product so that the spring can be inserted on the other side. Turn the power switch on to verify that the product is working properly.
Things to check before Requesting Repair Service Symptom Check It won’t turn on. Check to see if the power is connected or if the switch is off. It flickers. Turn the power off. Turn it back on after a moment. (If the flickering problem still exists, make a service request.) A certain area is dark. Make a service request.
Product Specifications Category 4 Inch Watts Light Output 6 Inch 8 8 Inch 15 23 37 460 470 880 930 990 960 1430 1500 1580 1560 2500 Lumens per Watt 58 59 58 62 66 64 62 65 69 68 68 W 2600 Im 70 lm/W Light Color 3000 4000 5000 5700 3000 4000 5000 5700 3000 4000 5000 5700 3000 4000 5000 5700 Color Accuracy (CRI) 80 Beam Angle Ø 120 X 88(H) Product Weight 358 Ø 180 X 100(H) 730 K ˚(degrees) 100 Size Unit Ø 223 X 111(H) 750 1360 mm g Input Voltage AC 100 - 240 ~ V
Dimming Cable Connection o dim the lamps, a compatible dimmer should be used. T The use of incompatible dimmers will result in damage to the products. Please verify with vendors. 1 Pin No. 1 2 2 Output Name GND 0~10V ※ This dimming cable is for dimming control. (0~10V) ※ Please use the designated wire. (24~20AWG) ※ Pay special attention to the polarities for proper dimming control.
Limited Warranty The limited warranty set forth below is given by LG Electronics, Inc. (“LGE”) with respect to the lighting product packaged with this limited warranty. (the “Product”).
P/No : MFL67404601 (REV02)