ENGLISH OWNER’S MANUAL CAR DVD Receiver Please read this manual carefully before operating your set and retain it for future reference.
1 Safety Information Safety Information 1 Safety Information To reduce the risk of electric shock, do not remove the cover or back of this product. There are no user-serviceable parts inside. Refer servicing to qualified service personnel. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
Safety Information CAUTION: This product employs a Laser System. To ensure proper use of this product, please read this owner’s manual carefully and retain it for future reference. Shall the unit require maintenance, contact an authorized service centre. To prevent direct exposure to laser beam, do not try to open the enclosure. Visible laser radiation when open. DO NOT STARE INTO BEAM.
Contents Contents 3 Installation 11 11 12 1 Safety Information 2 Safety Information 13 About detachable control panel Attaching the control panel Detaching the control panel Basic Installation 13 Basic Installation 13 Removing the existing receiver unit 14 ISO-DIN Installation 2 14 Remote Control Battery Installation Preparation 15 Connection 6 Introduction 9 Front panel 10 Remote control 15 Connecting to a car 16 Connecting to optional equipment 17 Adjusting the general set
Contents 4 5 Operation Maintenance 21 Basic Operations 29 Notes on Discs 22 Other Operations 29 Handling the Unit 22 To display file information 22 To slow down the playing speed 6 22 To play frame-by-frame Troubleshooting 23 Quick search 23 Using the Func menu 24 Using the time search bar 24 Resume playback 7 25 Viewing a photo Appendix 25 26 26 26 27 27 28 30 5 1 2 Troubleshooting 3 Listening to the radio Storing desired frequencies manually Listening to a preset s
Preparation 2 Preparation Reseting the unit About the 1. Press to open the control panel. Refer to the page 12 for detaching the control panel. Preparation Introduction Symbol Display “ ” may appear on your monitor display during operation and indicates that the function explained in this owner’s manual is not available on that disc.
Preparation Playable USB device Requirement File compatibility • Do not extract the USB device during operation (play, etc.). • Sampling frequency : within 8 kHz to 48 kHz (MP3), below 48 kHz (WMA) • An USB device which requires additional programme installation when you have connected it to a computer, is not supported. • Bit rate : within 8 kbps to 320 kbps (MP3), below 320 kbps (WMA) • File extensions: “.mp3”, “.wma”, “.wav”, “.ogg”, “.
Preparation Playable Discs DVD-VIDEO (12 cm disc) Discs such as movies that can be purchased or rented. DVD-R (12 cm disc) DVD-RW (12 cm disc) 2 Preparation DVD+R (12 cm disc). Supports the double layer disc also. DVD+RW (12 cm disc) Audio CD: Music CDs or CD-R/CDRW in music CD format that can be purchased. Some DVD±RW/DVD±R or CD-RW/CD-R cannot be played on this unit due to the recording quality or physical condition of the disc, or the characteristics of the recording device and authoring software.
Preparation 9 Front panel 2 Preparation a SRC/• OFF • When pressed, selects function sources. • When pressed and held, powers unit on or off. b Returns to the previous step. i USB port j Displays file or disc information. k MENU Activates or deactivates a setting menu. c Volume knob l b[-/+[B Skip / Search / Seek / Tune • Adjusts volume level. m Remote Sensor • Confirms the settings. n AUX If connected to other portable player, you can enjoy music or movie on the unit.
Preparation Remote control ./> SKIP: Goes to the next or previous chapter / track / file. X : Pauses playback. N : Starts playback or recording. 2 Preparation x: Stops playback. • • • • • • • • • c• • • • • • • • • MENU: Activates or deactivates setting menu. RETURN: Returns to the previous step. Direction buttons: Selects an option in the menu. LIST/ ENTER : • Checks tracks or files in Disc mode or preset stations in Tuner mode. • Confirms the settings.
Installation 11 3 Installation About detachable control panel Attaching the control panel 3 Installation You should attach the control panel after unpacking the box to use the receiver unit. And you can detach it according to your needs and keep it in the protective case. B A Attaching the control panel 1. Attach part A of the control panel to part B of the unit. D C 2. Attach part C of the control panel to part D of the unit while pushing the control panel to left. 3. Close the control panel.
Installation Detaching the control panel NOTE Detaching the control panel 3 Installation 1. Press to open the control panel. 2. Push the control panel to left. 3. Pull the control panel out of the unit. 4. Put the detached control panel into the protective case. Periodically wipe the contacts on the back of the control panel with a cotton swap moistened with alcohol. For safety, turn off the ignition before cleaning, and remove the key from the ignition switch.
Installation Basic Installation 13 Removing the existing receiver unit If there is already an installation sleeve for the receiver unit in the dashboard, it must be removed. Basic Installation Removing the existing receiver unit Before installing, make sure that the ignitionswitch is set to OFF and remove the terminal of the car battery to avoid short-circuiting. Basic Installation 3 Installation Bend the claws according to the thickness of the dashboard. 1. Remove the rear support from the unit.
Installation ISO-DIN Installation Remote Control Battery Installation ISO-DIN Installation Battery Installation 1 4 3 3 5 2 Installation 1. Slide the unit into the ISO-DIN frame. 2. Fit screws removed from the old unit. 3. Slide the unit and frame into the dash opening. 4. Install the dash panel or adapter plate. (According to models, this step may not be needed.) 1. Pull out the battery holder with a sharp product like a ball point pen. 2. Put the battery with the battery holder.
Installation 15 Connection Connecting to a car Before installing, make sure that the ignition-switch is set to OFF and remove the terminal of the car battery to avoid short-circuiting.
Installation Connecting to optional equipment You can connect optional equipment to the corresponding terminals of the unit. Connection 2 Auxiliary devices (Car TV, monitor, etc.) Amplifier (Optional) 3 Installation Rear view camara Rear signal from rear view camera Wired remote input (Optional) No.
Installation Adjusting the general settings You can change the settings of the unit by pressing MENU. MENU item overview XDSS+ /EQ OFF XDSS+ Pop Classic Rock Jazz Vocal Salsa Samba Reggae Russy User EQ 1 User EQ 2 Balance/Fader Sound The buttons for setting MENU User EQ 1/2 Auto-EQ DRC Remote control Press MENU MENU Operation Language TV Aspect Activates or deactivates a setting menu. Rotate volume knob U/u • Moves to other menu items. I/i • Adjusts the setting level.
Installation XDSS+/EQ The function helps you to enjoy sound more plentifully. The indicator lights up in the following order. OFF t XDSS+ t Pop t Classic t Rock t Jazz t Vocal t Salsa t Samba t Reggae t Russy t User EQ 1 t User EQ 2 t .. 5. Adjust the fader (front/ rear speaker) level by using the volume knob (U or u on the remote control). Sound Balance/ Fader 3 You can adjust left/right/ front/rear speaker output. Installation 1. Press MENU. 2.
Installation Display Language Selects a language for the Setup menu and on- screen display. TV Aspect Select a TV aspect ratio option according to your monitor type. 19 [Full Screen] Displays both title texts and album art images of ID3 tag in full screen. TV System You should select an appropriate system mode for your monitor system among NTSC, PAL, or Auto. Code Page [4:3 Letter Box] Select when a standard 4:3 monitor is connected.
Installation Setup DVD Audio / DVD Subtitle / DVD Menu Language Select the language you prefer for the audio track (disc audio), subtitles, and the disc menu during DVD playback. Original Refers to the original language in which the disc was recorded. 3 Lock Installation Password You can change password. When you use the unit first, input the default password of 0000. 1. Input a current password and press the volume knob (LIST/ENTER on the remote control). 2.
Operation 21 4 Operation Basic Operations Before watching DVD DVD MOVIE 1. Turn the unit on by pressing any key on the unit. 2. Insert the disc after pressing or connect the USB device to the USB port. When you attempt to watch a DVD, the screen is displayed as below. Then, select [Yes] or [No] by rotating the volume knob or pressing I or i on the remote control. 3. Select the Disc or USB function by pressing SRC. 4 Operation 4. Rotate the volume knob on the unit or press VOL.
Operation To pause playback Other Operations Press NX (X on the remote control) during playback. Press NX (B on the remote control) to resume playback. To display file information To scan forward or backward • On the unit Press and hold b[- or +[B repeatedly during playback to play fast forward or fast reverse with various playback speeds. • On the remote control Press m or M repeatedly during playback to play fast forward or fast reverse with various playback speeds.
Operation Quick search 1. Press the volume knob (LIST/ENTER on the remote control) to check files. 23 NOTE • If no button is pressed for 10 seconds, the onscreen display disappears. • A title number cannot be selected on some discs. • Available items may differ depending on discs or titles. Using the Func menu 2. Press (RETURN on the remote control) to check folders. By adjusting the Func menus, you can enjoy files/track/chapters in a way you want. 3.
Operation [Audio] DVD MOVIE Sets audio language or channel. [Subtitle] DVD MOVIE Sets a desired subtitle language. [Angle] DVD If the disc contains scenes recorded at different camera angles, you can change to a different camera angle during playback. Using the time search bar DVD MOVIE Using the time search bar, you can find easily the point where you want to start playback of movie files. 1. During playback, press and hold the volume knob (LIST/ENTER on the unit) until the bar turns red.
Operation Viewing a photo Adjusting the speed of slide show 1. Press the volume knob (LIST/ENTER on the remote control) to check files. You can set the slide show speed on the Func menu. 2. Press (RETURN on the remote control) to check folders. 3. Select a desired folder by using the volume knob (U or u on the remote control). 4. Press the volume knob (LIST/ENTER on the remote control). 5. Select a desired file by using the volume knob (U or u on the remote control). 6.
Operation Storing desired frequencies manually Adjusting Tuner settings 1. Press BAND/• TA to select a desired band you want to store. 2. Select Func and press the volume knob (LIST/ENTER on the remote control). 2. Press and hold b[-/+[B on the unit or I or i on the remote control and then press it repeatedly to select a desired frequency. 3. Select a desired item by using the volume knob (U or u on the remote control). 3. Select a desired preset number .
Operation REG (Region) [ON] The unit switches to another station, within the same network, broadcasting the same program when the receiving signals from the current station become weak. [OFF] The unit switches to another station, within the same network when the receiving signals from the current station become weak. (In this mode, the program may differ from the one currently received one.
Operation Recording to USB from Disc or FM tuner (RETURN on the remote 5. Press REC or control) again to stop. NOTE 1. Open the USB cover and connect it to the unit. 2. Select Disc or FM tuner. • When USB memory is full, “Not Enough Memory” displays and stops recording. 3. Start playback. • For tuner recording, the broadcastings are recorded by 20 moments on a file name. 4. On FM tuner mode, press REC to start recording.
Maintenance 29 5 Maintenance Notes on Discs Handling the Unit Handling Discs When shipping the unit Please save the original shipping carton and packing materials. If you need to ship the unit, for maximum protection, re-pack the unit as it was originally packed at the factory. Never stick paper or tape on the disc. Storing Discs Cleaning Discs • Do not use volatile liquids such as insecticide spray near the unit. • Wiping with strong pressure may damage the surface.
Troubleshooting 6 Troubleshooting Symptoms Solution The power does not turned on./ The unit doesn’t operate. • Confirm once more that all connections are correct. • Rectify the problem that caused the fuse to blow, and then replace it. Be very sure to install the correct fuse with the same rate. • Turn the unit off and then on again. There is no sound or the sound is distorted. 6 Troubleshooting • The unit is in scan, slow motion, or pause mode. • The sound volume is low.
Appendix 31 7 Appendix Area Code List Choose an area code from this list.
Appendix Specifications AUX General Output Power: 53 W x 4 CH (Max.) Power Source: DC 12 V Speaker impedance: Ground System: 4Ω Negative Frequency Response: 20 Hz to 20 kHz S/N Ratio: 85 dB Distortion: 0.1 % Channel Separation (1 kHz): 55 dB Max Input Level (1 kHz): Dimensions (W x H x D): 2V 178 x 50 x 169 mm (Without Control Panel) Net Weight (Approx.): 1.42 kg USB TUNER Version FM Tunning Range: 87.5 to 107.9 or 87.5 to 108 MHz USB 1.1 or USB 2.
Appendix 33 Trademarks and Licences Manufactured under licence from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories. “DVD Logo” is a trademark of DVD Format/Logo Licensing Corporation.
Импортер LG Electronics RUS Адрес импортера 143160 Российская Федерация, Московская область, Рузский район, сельское поселение Дороховское, 86 км. Минского шоссе, д.9 Адрес производителя : ЛГ ЭЛЕКТРОНИКС (КУНШАН) КОМПЬЮТЕР КО., ЛТД 215300, КИТАЙ, ПРОВИНЦИЯ ДЖИАНГ СУ, Г. КУНШАН, Ш. КИАНДЖИН, Д.
