User manual

• Do not pull the plug out of its socket by the cable, but always by

gripping the plug itself.

• If the mains supply cable is damaged, it must be replaced with a

special cable fitted by a qualified electrician to avoid any risk. This

cable is available from the manufacturer or your specialist dealer.

• The oven must be connected to the power supply using an all-pole

isolating switch with a contact gap of at least 3 mm.

• Multiple adaptors or extension cables must not be used.

• You must arrange for the appliance to be repaired by a qualified

professional electrician only. Contact our LG Service Centre or

your specialist dealer.

• Proceed with caution when connecting electrical appliances to

sockets in the vicinity of this appliance: electrical cables must not

be run near the hotplate cooking area or oven doors. Cables can

melt with the subsequent risk of a short circuit.

• Switch the machine off before changing the oven light bulb to

avoid any risk of electric shock.

• This appliance must only be operated as a built-in appliance. This

is necessary to ensure that all electrical components are shielded.

• Repairs and other work by ungualified persons could be

dangerous. The manufacturer cannot be held responsible for

unauthorised work.

Safety instruction for the installer

• A device must be provided in the electrical installation which

allows the appliance to be disconnected from the mains at all

poles with a contact opening width of at least 3mm suitable

isolation devices include line protected cut-outs, fuses(screw type

fuses are to be removed from the holder), earth leakage trips and

contactors.