Measurement Guide

CLEARANCES
▲
! Make sure the location of the water supply pipe is within the marked range.
▲
! Before connecting the power, always make sure to ground the product. (If the
product is not grounded, the user may be able to feel the electricity due to the
minute leakage current when touching the refrigerator door handle or side corner
even when there is no issue with the product.)
▲
! Do not ground the product to gas pipe, plastic water pipe or telephone wire etc. It
can cause electric shock and explosion.
CONNECTING POWER AND SECURING SPACE
FOR WATER SUPPLY PIPE
Power connection
The location of the 115V 60Hz power
connector must be located on the rear side
of the product as shown in the picture.
When installing the product, make sure to
check whether the cord is hung on the hook
on the rear side so that it is not pressed on
the refrigerator. Damaged power cord can
cause a re.
Installation space for
water supply pipe
Place the water hose for ice maker and water dispenser as shown in the picture, and
prepare hose to come up from the oor. (Copper pipe with diameter of 5/16”(8mm) is
recommended for the water hose.) If the water pipe and water hose is located far from
the product, bury the water hose on the oor and provide appropriate treatment.
TOP
BACK
2"1"
LFXS28566*
QUICK INSTALL &
CLEARANCES
For full installation directions/clearances
please refer to the corresponding
User Manual and Installation Guide.
DIMENSIONS/CLEARANCES/WEIGHT
A Depth without Handles 33-3/4"
B Width 35-3/4"
C Height to Top of Case 68-3/8"
D Height to Top of Door Hinge 69-3/4"
E Back Clearance 2"
F Depth without Door 29-1/8"
G Depth (Total with Door Open 90˚) 48- 1/4"
K Front Clearance 24"
M Depth with Handles 36-1/4"
Width (Door Open 90˚ with Handle) 44-1/4"
Width (Door Open 90˚ without Handle) 39-1/4"
Weight (Unit/Carton) 316 lbs. / 341 lbs.
Carton Dimensions (WxHxD) 38" x 73" x 39"