ENGLISH OWNER’S MANUAL LED LCD MONITOR Please read this manual carefully before operating your set and retain it for future reference. LED LCD MONITOR MODEL 19EN33S 22EN33S 19EN33SW 23EN33S 20EN33SS 24EN33S 20EN33S www.lg.
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.
2 TABLE OF CONTENTS CONTENTS ENGLISH ENG 3 ASSEMBLING AND PREPARING 24 SPECIFICATIONS 3 Unpacking 24 19EN33S 4 Parts and buttons 25 19EN33SW 5 Setting up the Monitor set 26 20EN33SS 5 - Attaching the Stand Base 27 20EN33S 5 - Detaching the Stand Base 28 22EN33S 6 - Mounting on a table 29 23EN33S 6 - Using the cable holder 30 24EN33S 8 - Mounting on a wall 31 Preset Modes (Resolution) 32 Indicator 9 USING THE MONITOR SET 9 Connecting to a PC 33 PROPER POSTURE 9
ASSEMBLING AND PREPARING 3 ASSEMBLING AND PREPARING Check your product box for the following items. If there are any missing accessories, contact the local dealer where you purchased your product. The illustrations in this manual may differ from the actual product and accessories.
4 ASSEMBLING AND PREPARING Parts and buttons ENGLISH ENG Power Indicator yyLighting On: Turned on yyLighting Off: Turned off (Power Button) Button (See p.11) Connection panel (See p.
ASSEMBLING AND PREPARING Detaching the Stand Base Attaching the Stand Base 1 Place the Monitor set with the screen side down on a flat and cushioned surface. 1 Place the Monitor set with the screen side down on a flat and cushioned surface. 2 CAUTION Lay a foam mat or soft protective cloth on the surface to protect the screen from damage. 2 1 Pull out the Stand Body and Stand Base from the monitor set. 2 Turn the screw to the left with a coin. 3 Pull out the Stand Base.
6 ASSEMBLING AND PREPARING Mounting on a table 3 Press (Power) button on the bottom switch ENGLISH ENG panel to turn the power on. 1 Lift and tilt the Monitor set into its upright position on a table. Leave a 10 cm (minimum) space from the wall for proper ventilation. CAUTION Unplug the power cord before moving the Monitor to another location. Otherwise electric shock may occur. 10 cm 10 cm 10 cm 10 cm Using the cable holder 2 Connect the AC-DC Adapter and Power Cord to a wall outlet.
ASSEMBLING AND PREPARING WARNING Using the Kensington security system The Kensington security system connector is located at the back of the Monitor set. For more information of installation and using, refer to the manual supplied with the Kensington security system or visit http://www.kensington.com . Connect the Kensington security system cable between the Monitor set and a table. Do not touch or press the screen when adjusting the angle of the monitor. Do not hold this set like below picture.
8 ASSEMBLING AND PREPARING Mounting on a wall Model ENGLISH ENG For proper ventilation, allow a clearance of 10 cm on each side and from the wall. Detailed instructions are available from your dealer, see the optional Tilt Wall Mounting Bracket Installation and Setup Guide.
USING THE MONITOR SET 9 USING THE MONITOR SET Your Monitor set supports Plug & Play*. yy *Plug & Play: A PC recognizes a connected device that users connect to a PC and turn on, without device configuration or user intervention. NOTE When using a D-Sub signal input cable yy connector for Macintosh D-SUB connection Transmits analog video from your PC to the Monitor set. Connect the PC and the Monitor set with the supplied D-sub 15 pin signal cable as shown in the following illustrations.
10 USING THE MONITOR SET CAUTION ENGLISH ENG Connect the signal input cable yy and tighten it by turning the screws clockwise. Do not press the screen with your yy finger for a long time as this may result in temporary distortion on the screen. Avoid displaying a fixed image on the yy screen for a long period of time to prevent image burn. Use a screensaver if possible. Self Image Setting Function Press the power button on the bottom panel to turn the power on.
CUSTOMIZING SETTINGS 11 CUSTOMIZING SETTINGS 2 Change the value of the menu item by pressing the buttons on the bottom of the Monitor set. To return to the upper menu or set other menu items, use the up arrow ( ) button. 3 Select EXIT to leave the OSD menu. MENU MY KEY FUNC. AUTO INPUT EXIT Monitor set Buttons Button Description Accesses the main menus.(See p.12) OSD Locked/OSD Unlocked This function allows you to lock the current control settings, so that they cannot be inadvertently changed.
12 CUSTOMIZING SETTINGS Customizing Settings ENGLISH ENG Menu Settings 1 Press MENU button on the bottom of the Monitor set to display the Menu OSD. 2 Set the options by pressing the ◄ or ► or ▼ buttons. 3 Select the "Next Menu" button to enter the more option settings. 4 Select EXIT to leave the OSD menu. To return to the upper menu or set other menu items, use the up arrow ( ) button. Each option is explained below.
CUSTOMIZING SETTINGS 13 Picture ENG ENGLISH 1 Press MENU button on the bottom of the Monitor set to display the Menu OSD. 2 Select the "Next Menu" button to enter the more option settings. 3 Enter to Picture by pressing the ▼ button. 4 Set the options by pressing the ◄ or ► or ▼ buttons. 5 Select EXIT to leave the OSD menu. To return to the upper menu or set other menu items, use the up arrow ( ) button. Each option is explained below.
14 CUSTOMIZING SETTINGS Color ENGLISH ENG 1 Press MENU button on the bottom of the Monitor set to display the Menu OSD. 2 Select the "Next Menu" button to enter the more option settings. 3 Select Color by pressing the ► button. 4 Enter to Color by pressing the ▼ button. 5 Set the options by pressing the ◄ or ► or ▼ buttons. 6 Select EXIT to leave the OSD menu. To return to the upper menu or set other menu items, use the up arrow ( ) button. Each option is explained below.
CUSTOMIZING SETTINGS 15 Display ENG ENGLISH 1 Press MENU button on the bottom of the Monitor set to display the Menu OSD. 2 Select the "Next Menu" button to enter the more option settings. 3 Select Display by pressing the ► button. 4 Enter to Display by pressing the ▼ button. 5 Set the options by pressing the ◄ or ► or ▼ buttons. 6 Select EXIT to leave the OSD menu. To return to the upper menu or set other menu items, use the up arrow ( ) button. Each option is explained below.
16 CUSTOMIZING SETTINGS Others ENGLISH ENG 1 Press MENU button on the bottom of the Monitor set to display the Menu OSD. 2 Select the "Next Menu" button to enter the more option settings. 3 Select Others by pressing the ► button. 4 Enter to Others by pressing the ▼ button. 5 Set the options by pressing the ◄ or ► or ▼ buttons. 6 Select EXIT to leave the OSD menu. To return to the upper menu or set other menu items, use the up arrow ( ) button. Each option is explained below.
CUSTOMIZING SETTINGS 17 MY KEY Setting ENG ENGLISH 1 Press MY KEY button on the bottom of the Monitor set to display the MY KEY OSD. 2 Set the options by pressing the ◄or►or▼buttons. 3 Select EXIT to leave the OSD menu. Each option is explained below. MY KEY Description MY KEY Setting MY KEY is short key. You can select one of FUNC. (Picture Mode, SUPER ENERGY SAVING, DUAL DISPLAY, DUAL WEB) as your favorite feature. Back Select Back to return MY KEY menu.
18 CUSTOMIZING SETTINGS FUNC. Setting ENGLISH ENG Picture Mode 1 Press FUNC. button on the bottom of the Monitor set to display the FUNC. OSD. 2 Enter to Picture Mode by pressing the ▼ button. 3 Set the options by pressing the ◄ or ► buttons. 4 Select EXIT to leave the OSD menu.To return to the upper menu or set other menu items, use the up arrow( )button. Each option is explained below. Picture Mode Description Custom It is a mode that the user can adjust each element.
CUSTOMIZING SETTINGS 19 SUPER ENERGY SAVING ENG ENGLISH 1 Press FUNC. button on the bottom of the Monitor set to display the FUNC. OSD. 2 Select SUPER ENERGY SAVING by pressing the ► button. 3 Enter to SUPER ENERGY SAVING by pressing the ▼ button. 4 Set the options by pressing the ◄ or ► or ▼buttons. 5 Select EXIT to leave the OSD menu.To return to the upper menu or set other menu items, use the up arrow ( ) button. Each option is explained below.
20 CUSTOMIZING SETTINGS * Before using below functions, please install DUAL SMART SOLUTION programme. ENGLISH ENG DUAL DISPLAY 1 Press FUNC. button on the bottom of the Monitor set to display the FUNC. OSD. 2 Select DUAL DISPLAY by pressing the ► button. 3 Enter to DUAL DISPLAY by pressing the ▼ button. 4 Set the options by pressing the ◄ or ► buttons. 5 Select EXIT to leave the OSD menu.To return to the upper menu or set other menu items, use the up arrow ( ) button. Each option is explained below.
CUSTOMIZING SETTINGS 21 MY KEY Setting ENG ENGLISH 1 Press FUNC. button on the bottom of the Monitor set to display the FUNC. OSD. 2 Select MY KEY Setting by pressing the ► button. 3 Enter to MY KEY Setting by pressing the ▼ button. 4 Set the options by pressing the ◄ or ► buttons. 5 Select EXIT to leave the OSD menu.To return to the upper menu or set other menu items, use the up arrow ( ) button. Each option is explained below.
22 SPECIFICATIONS ENGLISH ENG TROUBLESHOOTING Check the following before calling for service. No image appears Is the power cord of the display connected? Is the power indicator light on? Is the power on and the power indicator Red? Is the power indicator flickering? Do you see an "OUT OF RANGE" message on the screen? Do you see a "NO SIGNAL" message on the screen? yy Check and see if the power cord is connected properly to the power outlet. yy Press the Power button.
SPECIFICATIONS 23 CAUTION Display image is incorrect The screen color is mono or abnormal. yy Check if the signal cable is properly connected and use a screwdriver to fasten if necessary. yy Make sure the video card is properly inserted in the slot. yy Set the color setting higher than 24 bits (true color) at Control Panel ► Settings. The screen blinks. yy Check if the screen is set to interlace mode and if yes, change it to the recommend resolution.
24 SPECIFICATIONS ENGLISH ENG SPECIFICATIONS 19EN33S Display Sync Input Video Input Resolution Plug & Play Power Consumption Power Input AC-DC Adapter Dimensions (Width x Height x Depth) Weight Screen Type Pixel Pitch Horizontal Frequency Vertical Frequency Input Form Signal Input Input Form Max Recommend TFT (Thin Film Transistor) LCD (Liquid Crystal Display) Panel,Anti-Glare coating 47.0 cm visible diagonal (18.5 inch) 0.3 mm x 0.
SPECIFICATIONS ENG ENGLISH SPECIFICATIONS 19EN33SW Display Sync Input Video Input Resolution Screen Type Pixel Pitch TFT (Thin Film Transistor) LCD (Liquid Crystal Display) Panel,Anti-Glare coating 48.2 cm visible diagonal (19 inch) 0.283 mm x 0.283 mm (Pixel Pitch) Horizontal Frequency 30 kHz to 71 kHz (Automatic) Vertical Frequency 56Hz to 75Hz (D-SUB) Input Form Separate Sync. Signal Input 15 pin D-SUB Connector Input Form RGB Analog (0.
26 SPECIFICATIONS ENGLISH ENG SPECIFICATIONS 20EN33SS Display Sync Input Video Input Resolution Plug & Play Power Consumption Power Input AC-DC Adapter Dimensions (Width x Height x Depth) Weight Screen Type Pixel Pitch Horizontal Frequency Vertical Frequency Input Form Signal Input Input Form Max Recommend TFT (Thin Film Transistor) LCD (Liquid Crystal Display) Panel,Anti-Glare coating 49.4 cm visible diagonal (19.5 inch) 0.271 mm x 0.
SPECIFICATIONS ENG ENGLISH SPECIFICATIONS 20EN33S Display Sync Input Video Input Resolution Screen Type Pixel Pitch TFT (Thin Film Transistor) LCD (Liquid Crystal Display) Panel,Anti-Glare coating 50.8 cm visible diagonal (20 inch) 0.276 mm x 0.276 mm (Pixel Pitch) Horizontal Frequency 30 kHz to 83 kHz (Automatic) Vertical Frequency 56Hz to 75Hz (D-SUB) Input Form Separate Sync. Signal Input 15 pin D-SUB Connector Input Form RGB Analog (0.
28 SPECIFICATIONS ENGLISH ENG SPECIFICATIONS 22EN33S Display Sync Input Video Input Resolution Plug & Play Power Consumption Power Input AC-DC Adapter Dimensions (Width x Height x Depth) Weight Screen Type Pixel Pitch Horizontal Frequency Vertical Frequency Input Form Signal Input Input Form Max TFT (Thin Film Transistor) LCD (Liquid Crystal Display) Panel,Anti-Glare coating 54.6 cm visible diagonal (21.5 inch) 0.248 mm x 0.
SPECIFICATIONS 23EN33S Display Sync Input Video Input Resolution Plug & Play Power Consumption Power Input AC-DC Adapter Dimensions (Width x Height x Depth) Weight Screen Type Pixel Pitch Horizontal Frequency Vertical Frequency Input Form Signal Input Input Form Max Recommend TFT (Thin Film Transistor) LCD (Liquid Crystal Display) Panel,Anti-Glare coating 58.4 cm visible diagonal (23 inch) 0.265 mm x 0.265 mm (Pixel Pitch) 30 kHz to 83 kHz (Automatic) 56 Hz to 75 Hz (D-SUB) Separate Sync.
30 SPECIFICATIONS ENGLISH ENG SPECIFICATIONS 24EN33S Display Sync Input Video Input Resolution Screen Type Pixel Pitch TFT (Thin Film Transistor) LCD (Liquid Crystal Display) Panel,Anti-Glare coating 60.0 cm visible diagonal (23.6 inch) 0.272 mm x 0.272 mm (Pixel Pitch) Horizontal Frequency 30 kHz to 83 kHz (Automatic) Vertical Frequency 56 Hz to 75 Hz (D-SUB) Input Form Separate Sync. Signal Input 15 pin D-SUB Connector Input Form RGB Analog (0.
SPECIFICATIONS 31 Preset Modes (Resolution) ENG ENGLISH 19EN33S Display Modes (Resolution) Horizontal Frequency(kHz) Vertical Frequency(Hz) Polarity(H/V) 720 x 400 31.468 70 -/+ 640 x 480 31.469 60 -/- 640 x 480 37.500 75 -/- 800 x 600 37.879 60 +/+ 800 x 600 46.875 75 +/+ 832 x 624 49.725 75 -/- 1024 x 768 48.363 60 -/- 1366 x 768 47.712 60 +/+ Display Modes (Resolution) Horizontal Frequency(kHz) Vertical Frequency(Hz) Polarity(H/V) 720 x 400 31.
32 SPECIFICATIONS 22EN33S/23EN33S/24EN33S ENGLISH ENG Display Modes (Resolution) Horizontal Frequency(kHz) Vertical Frequency(Hz) Polarity(H/V) 720 x 400 31.468 70 -/+ 640 x 480 31.469 60 -/- 640 x 480 37.500 75 -/- 800 x 600 37.879 60 +/+ 800 x 600 46.875 75 +/+ 1024 x 768 48.363 60 -/- 1024 x 768 60.023 75 +/+ 1152 x 864 67.500 75 +/+ 1280 x 1024 63.981 60 +/+ 1280 x 1024 79.976 75 +/+ 1680 x 1050 65.290 60 -/+ 1920 x 1080 67.
PROPER POSTURE 33 ENG ENGLISH PROPER POSTURE Proper posture for using the Monitor set. Adjust the Monitor set and your posture to allow you to view images at the optimal viewing angle. Place your hands gently on the keyboard, keeping your arms bent at the elbows and horizontally outright. Adjust the location of the Monitor set to avoid it reflecting light.
Declaration of Conformity Trade Name: LG Model : 19EN33SA, 19EN33SWA 20EN33SSA, 20EN33SA 22EN33SA, 23EN33SA 24EN33SA Responsible Party: LG Electronics Inc. Address : 1000 Sylvan Ave. Englewood Cliffs NJ 07632 U.S.A TEL: 201-266-2534 *above information is only for USA FCC Regulatory Make sure to read the Safety Precautions before using the product. Keep the Owner’s Manual (CD) in an accessible place for future reference.