ENGLISH OWNER’S MANUAL LED LCD MONITOR TV Please read this manual carefully before operating your set and retain it for future reference. LED LCD MONITOR TV MODELS M2080D M2280D M2380D M2780D M2080DF M2280DF M2380DF M2780DF M2080DB M2280DB M2380DB M2080DN M2280DN M2380DN M2780DN www.lg.
CONTENTS PREPARATION CONTENTS FRONT PANEL CONTROLS...............................4 BACK PANEL INFORMATION.............................6 STAND INSTALLATION.......................................8 DETACHING STAND.........................................11 DETACHING STAND BODY..............................14 WALL MOUNT : HORIZONTAL INSTALLATION.............15 DESKTOP PEDESTAL INSTALLATION............16 POSITIONING YOUR DISPLAY........................17 SWIVEL STAND(Only M2780D / M2780DF).....17 LOCATION.....
TIME SETTING CLOCK SETUP..................................................96 AUTO ON/OFF TIME SETTING........................97 SLEEP TIMER SETTING...................................98 TO USE A USB DEVICE WHEN CONNECTING A USB DEVICE..........113 PHOTO LIST....................................................115 MUSIC LIST.....................................................121 MOVIE LIST.....................................................125 DIVX REGISTRATION CODE.........................132 DEACTIVATION.
PREPARATION FRONT PANEL CONTROLS ■■ This is a simplified representation of the front panel. The image shown may be somewhat different from your set. PREPARATION M2080D / M2280D M2380D / M2780D M2080DF / M2280DF M2380DF / M2780DF 1 1 9 2 3 4 1 IR receiver (Remote controller receiver) 2 INPUT Button 3 MENU Button 4 OK Button 5 VOLUME Button 6 PROGRAMME Button 7 Power Button 8 Power Indicator 5 6 Illuminates blue when the set is switched on.
FRONT PANEL CONTROLS ■■ This is a simplified representation of the front panel. The image shown may be somewhat different from your set. M2080DN / M2280DN M2380DN / M2780DN 1 PREPARATION M2080DB / M2280DB M2380DB 1 2 3 4 5 6 1 IR receiver (Remote controller receiver) 2 INPUT Button 3 MENU Button 4 OK Button 5 VOLUME Button 6 PROGRAMME Button 7 Power Button 8 Power Indicator Illuminates blue when the set is switched on. Note: You can adjust Power indicator in the OPTION menu.
PREPARATION BACK PANEL INFORMATION ■■ This is a simplified representation of the back panel. The image shown may be somewhat different from your set.
BACK PANEL INFORMATION DC ADAPTER PORT Connect to the power cord socket. 2 HDMI / DVI INPUT Connect a HDMI signal to HDMI IN. Or DVI (VIDEO) signal to HDMI IN with DVI to HDMI cable. 3 OPTICAL DIGITAL AUDIO OUT Connect digital audio to various types of equipment. Connect to a Digital Audio Component. Use an Optical audio cable. 4 RGB/DVI AUDIO INPUT Connect the audio from a PC. 5 HEADPHONE SOCKET Plug the headphone into the headphone socket.
PREPARATION STAND INSTALLATION M2080D/M2280D/M2380D/M2780D ■■ The image shown may be somewhat different from your set. Carefully place the product screen side down on a cushioned surface that will protect product and screen from damage. 2 Insert the Stand Base into the product. PREPARATION 1 Stand Base 3 Use a Coin on the bottom of the stand base and turn the screw clockwise to tighten.
STAND INSTALLATION M2080DF/M2280DF/M2380DF/M2780DF ■■ The image shown may be somewhat different from your set. Carefully place the product screen side down on a cushioned surface that will protect product and screen from damage. 2 Insert the Stand Base into the product. PREPARATION 1 Stand Base 3 Use a Coin on the bottom of the stand base and turn the screw clockwise to tighten.
PREPARATION M2080DB/M2280DB/M2380DB STAND INSTALLATION ■■ The image shown may be somewhat different from your set. Carefully place the product screen side down on a cushioned surface that will protect product and screen from damage. 2 Insert the Stand Base into the product. PREPARATION 1 Stand Base 3 Use a Coin on the bottom of the stand base and turn the screw clockwise to tighten.
DETACHING STAND M2080D/M2280D/M2380D/M2780D ■■ The image shown may be somewhat different from your set. Place the set screen side down on a cushion or soft cloth. 2 Detach the monitor to the Stand Base by turning the screw to the left. Turn the screw by using a Coin. PREPARATION 1 Coin Stand Base 3 Pull the stand base.
PREPARATION DETACHING STAND M2080DF/M2280DF/M2380DF/M2780DF ■■ The image shown may be somewhat different from your set. PREPARATION 1 Place the set screen side down on a cushion or soft cloth. 2 Detach the monitor to the Stand Base by turning the screw to the left. Turn the screw by using a Coin. Coin Stand Base 3 12 Pull the stand base.
DETACHING STAND M2080DB/M2280DB/M2380DB ■■ The image shown may be somewhat different from your set. Place the set screen side down on a cushion or soft cloth. 2 Detach the monitor to the Stand Base by turning the screw to the left. Turn the screw by using a Coin. PREPARATION 1 Coin Stand Base 3 Pull the stand base.
PREPARATION DETACHING STAND BODY ■ The image shown may be somewhat different from your set. ■ Remove the Stand Body in the same way as the following when using it as a Wall Hook. PREPARATION 1. Remove the screw 2 point. 2. Pull the stand body. M2080D / M2280D M2380D / M2780D M2080DB / M2280DB M2380DB 3.
WALL MOUNT : HORIZONTAL INSTALLATION For proper ventilation, allow a clearance of 10 cm on each side and from the wall. Detailed installation instructions are available from your dealer, see the optional Tilt Wall Mounting Bracket Installation and Setup Guide. 10 cm 10 cm PREPARATION 10 cm 10 cm 10 cm If you intend to mount the set to a wall, attach Wall mounting interface (optional parts) to the back of the set.
PREPARATION DESKTOP PEDESTAL INSTALLATION ■■ The image shown may be somewhat different from your set. For proper ventilation, allow a clearance of 10 cm on each side and from the wall.
POSITIONING YOUR DISPLAY ■ The image shown may be somewhat different from your set. * Tilt range -5° 10° Adjust the position of the panel in various ways for maximum comfort. PREPARATION SWIVEL STAND(Only M2780D / M2780DF) ■ The image shown may be somewhat different from your set. After installing the set, you can adjust the set manually to the left or right direction by 179 degrees to suit your viewing position.
PREPARATION KENSINGTON SECURITY SYSTEM PREPARATION - The product is equipped with a Kensington Security System connector on the back panel. Connect the Kensington Security System cable as shown below. - For detailed installation and use of the Kensington Security System, refer to the user’s guide provided with the Kensington Security System. For further information, contact http://www.kensington.com, the internet homepage of the Kensington company.
EXTERNAL EQUIPMENT SETUP ■■ To prevent damage do not connect to the mains outlet until all connections are made between the devices. ANTENNA CONNECTION ■■ For optimum picture quality, adjust antenna direction. ■■ An antenna cable and converter are not supplied.
EXTERNAL EQUIPMENT SETUP ■■ To avoid damaging any equipment, never plug in any power cords until you have finished connecting all equipment. ■■ The image shown may be somewhat different from your set. HD RECEIVER SETUP Connecting with a component cable EXTERNAL EQUIPMENT SETUP 1 Connect the video outputs (Y, PB, PR) of the digital set-top box to the COMPONENT IN VIDEO jacks on the SET. 2 Connect the audio output of the digital set-top box to the COMPONENT IN AUDIO jacks on the SET.
Connecting a set-top box with a HDMI cable Connect the digital set-top box to HDMI/DVI IN 1 or HDMI/DVI IN 2 jack on the SET 2 Turn on the digital set-top box. (Refer to the owner’s manual for the digital set-top box.) 3 Select HDMI 1 or HDMI 2 input source using the INPUT button on the remote control. 1 EXTERNAL EQUIPMENT SETUP 1 ! NOTE ►Check ► that your HDMI cable is High Speed HDMI Cable. If the HDMI cables are not High Speed HDMI Cable, flickering or no screen display can result.
EXTERNAL EQUIPMENT SETUP Connecting with an HDMI to DVI cable EXTERNAL EQUIPMENT SETUP 1 Connect the digital set-top box to HDMI/DVI IN 1 or HDMI/DVI IN 2 jack on the SET. 2 Connect the audio output of the digital set-top box to the AUDIO IN (RGB/DVI) jack on the SET. 3 Turn on the digital set-top box. (Refer to the owner’s manual for the digital set-top box.) 4 Select HDMI 1 or HDMI 2 input source using the INPUT button on the remote control.
DVD SETUP Connecting with a component cable Connect the video outputs (Y, PB, PR) of the DVD to the COMPONENT IN VIDEO jacks on the SET. 2 Connect the audio outputs of the DVD to the COMPONENT IN AUDIO jacks on the SET. 3 Turn on the DVD player, insert a DVD. 4 Select Component input source using the INPUT button on the remote control. 5 Refer to the DVD player's manual for operating instructions.
EXTERNAL EQUIPMENT SETUP Connecting with a Euro Scart cable EXTERNAL EQUIPMENT SETUP 2 Connect the Euro scart socket of the DVD to the AV1 Euro scart socket on the SET. OPTICAL AUDIO DIGITAL IN AUDIO OUT (RGB/DVI) 1 USB IN Turn on the DVD player, insert a DVD. YP 3 AV IN2 1 VIDEO B VIDEO PR H/P (MONO) L - AUDIO - R ANTENNA / CABLE IN LR AUDIO Select AV1 input source using the INPUT button on the remote control. 1 4 Refer to the DVD player's manual for operating instructions.
Connecting the HDMI cable Connect the HDMI output of the DVD to the HDMI/DVI IN 1 or HDMI/DVI IN 2 jack on the SET 2 Select HDMI 1 or HDMI 2 input source using the INPUT button on the remote control. 3 Refer to the DVD player's manual for operating instructions. 1 EXTERNAL EQUIPMENT SETUP 1 ! NOTE ►Check ► that your HDMI cable is High Speed HDMI Cable. If the HDMI cables are not High Speed HDMI Cable, flickering or no screen display can result. Please use the High Speed HDMI Cable.
EXTERNAL EQUIPMENT SETUP VCR SETUP ■■ To avoid picture noise (interference), allow adequate distance between the VCR and SET. Connecting with a RF cable EXTERNAL EQUIPMENT SETUP 26 1 2 Wall Jack Antenna 1 Connect the ANT OUT socket of the VCR to the ANTENNA / CABLE IN socket on the SET. 2 Connect the antenna cable to the ANT IN socket of the VCR. 3 Press the PLAY button on the VCR and match the appropriate channel between the SET and VCR for viewing.
Connecting with a Euro Scart cable 1 Connect the Euro scart socket of the VCR to the AV1 Euro scart socket on the SET. OPTICAL AUDIO DIGITAL IN AUDIO OUT (RGB/DVI) 1 Insert a video tape into the VCR and press PLAY on the VCR. (Refer to the VCR owner’s manual.) 3 Select AV1 input source using the INPUT button on the remote control. 4 Refer to the VCR player's manual for operating instructions.
EXTERNAL EQUIPMENT SETUP Connecting with a RCA cable Left = white, and Audio Right = red) EXTERNAL EQUIPMENT SETUP 2 3 Insert a video tape into the VCR and press PLAY on USB IN YP AV IN2 1 OPTICAL AUDIO DIGITAL IN AUDIO OUT (RGB/DVI) Connect the AUDIO/VIDEO jacks between SET and 1 VCR. Match the jack colours (Video = yellow, Audio VIDEO B the VCR. (Refer to the VCR owner’s manual.
INSERTION OF CI MODULE --To view the encrypted (pay) services in digital TV mode. --This feature is not avai lable in al l countries. 1 Insert the CI Module to PCMCIA (Personal Computer Memory Card International Association) CARD SLOT of SET as shown. EXTERNAL EQUIPMENT SETUP For further information, see p.61 ! NOTE ►Check ► if the CI module is inserted into the PCMCIA card slot in the right direction. If the module is not inserted properly, this can cause damage to the TV and the PCMCIA card slot.
EXTERNAL EQUIPMENT SETUP DIGITAL AUDIO OUT SETUP Sending the TV’s audio signal to external audio equipment via the Digital Audio Output (Optical) port. If you want to enjoy digital broadcasting through 5.1-channel speakers, connect the OPTICAL DIGITAL AUDIO OUT terminal on the back of TV to a Home Theater (or amp). EXTERNAL EQUIPMENT SETUP 1 Connect one end of an optical cable to the TV Digital Audio (Optical) Output port.
USB SETUP 1 Connect the USB device to the USB IN jacks on the side of SET. 2 After connecting the USB IN jacks, you use the USB function. (► p.
EXTERNAL EQUIPMENT SETUP HEADPHONE SETUP You can listen the sound through the headphone. EXTERNAL EQUIPMENT SETUP 1 Plug the headphone into the headphone socket. 2 To adjust the headphone volume, press the + or - button. If you press the MUTE button, the sound from the headphone is switched off. ! NOTE ►► AUDIO menu items are disabled when connecting a headphone. ►► Optical Digital Audio Out is not available when connecting a headphone.
OTHER A/V SOURCE SETUP 1 Connect the AUDIO / VIDEO jacks between SET and external equipment. Match the jack colours. 2 Select AV2 input source with using the INPUT button on the remote control. 3 Operate the corresponding external equipment.
EXTERNAL EQUIPMENT SETUP PC SETUP When using the remote control, aim it at the remote control sensor on the SET. When connecting with a D-sub 15 pin cable EXTERNAL EQUIPMENT SETUP 1 Connect the signal cable from the monitor output socket of the PERSONAL COMPUTER to the PC input socket of the SET. 2 Connect the audio cable from the PC to the AUDIO IN (RGB/DVI) sockets of the SET. 3 Press the INPUT button to select RGB. 4 Switch on the PC, and the PC screen appears on the set.
Connecting with an HDMI to DVI cable 1 Connect the DVI output of the PC to the HDMI/DVI IN1 2 Connect the PC audio output to the AUDIO IN (RGB/ or HDMI/DVI IN2 jack on the SET. 3 Turn on the PC and the SET. 4 Select HDMI 1 or HDMI 2 input source using the INPUT 1 2 button on the remote control. EXTERNAL EQUIPMENT SETUP DVI) jack on the SET. ! NOTE ►If ► you want to use HDMI-PC mode, you must set the input label to PC mode.
EXTERNAL EQUIPMENT SETUP Connecting with an HDMI to HDMI cable EXTERNAL EQUIPMENT SETUP 1 Connect the HDMI output of the PC to the HDMI/DVI IN1 2 Turn on the PC and the SET. 3 Select HDMI 1 or HDMI 2 input source using the INPUT or HDMI/DVI IN2 jack on the SET. button on the remote control. 1 ! NOTE ►►Check that your HDMI cable is High Speed HDMI Cable. If the HDMI cables are not High Speed HDMI Cable, flickering or no screen display can result. Please use the High Speed HDMI Cable.
BACK COVER FOR WIRE ARRANGEMENT Tie cables together with a cable management as shown in the illustration.
EXTERNAL EQUIPMENT SETUP SUPPORTED DISPALY RESOLUTION RGB[PC] mode M2080D / M2080DF / M2080DB / M2080DN Resolution EXTERNAL EQUIPMENT SETUP 640 x 480 640 x 480 800 x 600 800 x 600 832 x 624 1024 x 768 1024 x 768 1280 x 1024 1600 x 900 Horizontal Vertical Frequency(kHz) Frequency(Hz) 31.469 37.5 37.879 46.875 49.725 48.363 60.023 63.981 60 59.94 75 60.317 75 64.55 60 75.029 60.
HDMI/DVI - DTV mode Resolution 720 x 576 1280 x 720 1280 x 720 1920 x 1080 1920 1920 1920 1920 x x x x 1080 1080 1080 1080 1920 x 1080 ! NOTE Horizontal Vertical Frequency(kHz) Frequency(Hz) 31.469 31.5 31.25 37.500 44.96 45 33.72 33.75 28.125 27 33.75 56.250 67.43 67.5 59.94 60 50 50 59.94 60 59.94 60 50.00 24 30.00 50 59.94 60 ►Avoid ► keeping a fixed image on the set’s screen for prolonged periods of time.
WATCHING TV / PROGRAMME CONTROL REMOTE CONTROL KEY FUNCTIONS When using the remote control, aim it at the remote control sensor on the set. ꔰ (POWER) Switches the set on from standby or off to standby. ENERGY A djust the Energy Saving mode of the SET. SAVING (► P. 72) TV/PC Selects TV or PC mode. WATCHING TV / PROGRAMME CONTROL INPUT External input mode rotates in regular sequence. TV/RAD Selects Radio, TV and DTV channel. 0~9 number Selects a programme. button Selects numbered items in a menu.
VOLUME Adjusts the volume. UP/DOWN FAV Displays the selected favourite programme. (► P. 63) MARK Check and un-check programmes in the USB menu. RATIO Selects your desired Aspect Ratio of picture. Programme Selects a programme. UP/DOWN PAGE Move from one full set of screen information to the UP/DOWN next one. 1 TELETEXT These buttons are used for teletext. BUTTONS For further details, see the ‘Teletext’ section. (► P. 134 to 135) SUBTITLE Recalls your preferred subtitle in digital mode.
WATCHING TV / PROGRAMME CONTROL TURNING ON THE TV --When your TV is turned on, you will be able to use its features. 1 Firstly, connect the power cord correctly. At this stage, the TV switches to standby mode. 2 In standby mode to turn TV on, press the / I, INPUT or Pꕌꕍ button on the TV or press the POWER, INPUT, Pꕌꕍor NUMBER button on the remote control and the TV will switch on.
QUICK MENU Your TV's OSD (On Screen Display) may differ slightly from that shown in this manual. Q.Menu (Quick Menu) is a menu of features which users might use frequently. ꔣ Aspect Ratio: Selects your desired picture format.For Zoom Setting, select 14:9, Zoom and Cinema Zoom in Ratio Menu. After completing Zoom Setting, the display goes back to Q.Menu. ꕈ Sound Mode: It is a feature to automatically set the sound combination which it deems the best for the images being watched.
WATCHING TV / PROGRAMME CONTROL ON SCREEN MENUS SELECTION AND ADJUSTMENT Your set's OSD (On Screen Display) may differ slightly from what is shown in this manual.
AUTO PROGRAMME TUNING (For countries other than Finland, Sweden, Denmark and Norway) Use this to automatically find and store all available programmes. When you start auto programming, all previously stored service information will be deleted. The maximum number of programmes that can be stored is 1000. But the number may differ slightly depending on broadcasting signals.
WATCHING TV / PROGRAMME CONTROL AUTO PROGRAMME TUNING (Only for Finland, Sweden, Denmark and Norway) DVB-C Auto Tuning is a menu for users in countries that support DVB cable. Use this to automatically find and store all available programmes. When you start auto programming, all previously stored service information will be deleted.
If you want to select the Cable, ■■ The image shown may be somewhat different from your set. Service Operator SETUP Move SETUP OK ꔉ Auto AutoTuning Tuning Manual Tuning SETUP OK Manual Tuning ➩ Programme Edit Software Update Move Auto AutoTuning Tuning Please select your ꔉ TV Connection.
WATCHING TV / PROGRAMME CONTROL • When you select the Cable, the Cable Service Operator selection screen can differ or not exist by the Cable situation of the applicable country • The popup window to select between Service Operator is only shown initially for the 3 cases when you accessing the Initial Setting menu, when you change from Antenna to Cable or when you access the menu after changing the Country.
AUTO PROGRAMME TUNING If you select the “- -” of Country Setting, (Except for Finland, Sweden, Denmark and Norway) To watch DVB-C in the countries excluding Finland, Sweden, Denmark and Norway select '- -' as the Country in OPTION. You can select User mode or Full mode in Auto Tuning. During Full mode tuning, some channel may be restricted for some Cable Service Operator (SO), and it may take a long time for tuning.
WATCHING TV / PROGRAMME CONTROL CABLE DTV SETTING (IN CABLE MODE ONLY) The range that a user can select from the Service Operator menu differs depending on number of Service Operator supported by each country, and if number of supported Service Operator for each country is 1, corresponding function becomes non-activation.
MANUAL PROGRAMME TUNING (IN DIGITAL MODE) Manual Tuning lets you manually add a programme to your programme list. (For countries other than Finland, Sweden, Denmark and Norway & When selecting Antenna if Finland, Sweden, Denmark, Norway or “--” country is chosen) SETUP Move SETUP OK ꔉ Programme Edit Software Update : ON ➩ Manual ManualTuning Tuning OK ◄ ꔉ DTV Programme Edit to your channel list. Software Update UHF CH.
WATCHING TV / PROGRAMME CONTROL (When selecting Cable (DVB cable mode) if Finland, Sweden, Denmark, Norway or “--” country is chosen) SETUP Move SETUP OK Move Auto Tuning Auto Tuning Manual ManualTuning Tuning ꔉ Programme Edit Software Update : ON ➩ Manual ManualTuning Tuning Programme Edit Software Update WATCHING TV / PROGRAMME CONTROL Diagnostics Diagnostics CI Information CI Information OK ◄ DTV ꔉ Frequency(kHz) Symbol rate(kS/s) : ON Modulation Bad ► 36200 6875 640AM no
MANUAL PROGRAMME TUNING (IN ANALOGUE MODE) Manual Tuning lets you manually tune and arrange the stations in whatever order you desire. SETUP Move SETUP OK Move Auto Tuning Auto Tuning ꔉ Manual ManualTuning Tuning Programme Edit Software Update : ON Manual ManualTuning Tuning ➩ Programme Edit Software Update Diagnostics CI Information CI Information ◄ Storage TV ꔉ ► 3 System : ON Band BG V/UHF Channel 0 Search ◄► Name C 02 Store Close 1 2 MENU 6 Select SETUP.
WATCHING TV / PROGRAMME CONTROL SETUP Move SETUP OK ꔉ Manual ManualTuning Tuning ➩ Programme Edit Software Update Move Auto Tuning Auto Tuning : ON Manual ManualTuning Tuning Programme Edit Software Update Diagnostics Diagnostics CI Information CI Information OK ◄ Storage ꔉ TV ► 3 System : ON Band BG V/UHF Channel 0 Search ◄► Name C 02 Store Close WATCHING TV / PROGRAMME CONTROL ■■ Assigning a station name You can assign a station name with five characters to each
PROGRAMME EDIT When a programme number is skipped, it means that you will be unable to select it using P ꕌꕍ button during TV viewing. If you wish to select the skipped programme, directly enter the programme number with the NUMBER buttons or select it in the Programme edit menu. This function enables you to skip the stored programmes. You can change the programme number using “Move” function, if “Automatic Numbering” is unchecked when you start Auto Tuning.
WATCHING TV / PROGRAMME CONTROL IN DTV/RADIO MODE ■■ Skipping a programme number 1 2 3 Select a programme number to be skipped. BLUE Turn the programme number to blue. BLUE Release. WATCHING TV / PROGRAMME CONTROL IN TV MODE This function enables you to delete or skip the stored programmes. You can also move some channels and use other programme numbers. ■■ Deleting a programme 1 2 3 Select a programme number to be skipped. RED Turn the programme number to red. RED Delete. BLUE Release.
■■ Auto Sort 1 YELLOW Start Auto Sort. • After activating Auto Sort once, you can no longer edit programmes. 1 2 3 Select a programme number to be skipped. BLUE Turn the programme number to blue. BLUE Release. • When a programme number is skipped it means that you will be unable to select it using the P ꕌꕍ button during normal TV viewing. • If you wish to select a skipped programme, directly enter the programme number with the NUMBER buttons or select it in the programme edit or EPG.
WATCHING TV / PROGRAMME CONTROL SOFTWARE UPDATE Software Update means software can be downloaded through the digital terrestrial broadcasting system. SETUP Move SETUP OK Manual Tuning Programme Edit Software SoftwareUpdate Update WATCHING TV / PROGRAMME CONTROL 58 1 OK ꔉ : ON Manual Tuning Programme Edit Software SoftwareUpdate Update Diagnostics CI Information CI Information :Off On : ON ꔉ On On Select SETUP. 2 Select Software Update.
* When setting “Software Update” Occasionally, a transmission of updated digital software information will result in the following menu on the TV screen. YES Close Simple Update: for current update stream A new software update is available at 00/00/0 00:00. Do you want to update the software when available? YES After the Software Update is complete, the System restarts. Software downloading progress. Ver. 03.01.00 ► Ver. 03.02.00 65 % HIDE New Software is successfully installed.
WATCHING TV / PROGRAMME CONTROL DIAGNOSTICS This function enables you to view information on the Manufacturer, Model/Type, Serial Number and Software Version. This displays the information and signal strength of the tuned *MUX. This displays the signal information and service name of the selected MUX. (*MUX: A higher directory of channels in digital broadcasting (a single MUX contains multiple channels.
CI [COMMON INTERFACE] INFORMATION This function enables you to watch some encrypted services (pay services). If you remove the CI Module, you cannot watch pay services. When the module is inserted into the CI slot, you can access the module menu. To purchase a module and smart card, contact your dealer. Do not repeatedly insert or remove a CI module from the TV. This may cause a malfunction. When the TV is turned on after inserting a CI Module, you may not have any sound output.
WATCHING TV / PROGRAMME CONTROL SELECTING THE PROGRAMME LIST You can check which programmes are stored in the memory by displaying the programme list. Programme List Mini Glossary Displayed when the Locked Programme. 1 BBC 2 BBC ꔉ 3 BBC WATCHING TV / PROGRAMME CONTROL Exit. ■■ Displaying programme LIST 1 LIST Display the Programme List. • You may find some blue programmes. These have been set up to be skipped by auto programming or in the programme edit mode.
FAVOURITE PROGRAMME SETUP ■■ Selecting favourite programme Favourite programme is a convenient feature that lets you quikly scan up to programmes of your choice without having to wait for the TV to scan through all the in-between programmes. Favourite ◄ ► 1 2 3 Select your desired programme. or 4 Select Favourite. Select Favourite. Return to TV viewing. WATCHING TV / PROGRAMME CONTROL Favourite • This will automatically include the selected programme into your favourite programme list.
WATCHING TV / PROGRAMME CONTROL INPUT LIST HDMI1/2, AV1/2, COMPONENT and RGB can be recognized by a detect pin and thus enabled only when an external device approves voltage. By using TV/RAD button, you can move from External Input to RF Input and to the last watched programme in DTV/RADIO/TV mode. • Antenna or Cable: Select it when watching the DTV/TV. (Digital cable input is available only at Finland, Sweden and “--” country) • AV1, AV2: Select it when watching the VCR or external equipment.
EPG (ELECTRONIC PROGRAMME GUIDE) (IN DIGITAL MODE) This system has an Electronic Programme Guide (EPG) to help your navigation through all the possible viewing options. The EPG supplies information such as programme listings, start and end times for all available services. In addition, detailed information about the programme is often available in the EPG (the availability and amount of these programme details will vary, depending on the particular broadcaster).
EPG (ELECTRONIC PROGRAMME GUIDE) (IN DIGITAL MODE) Button Function in NOW/NEXT Guide Mode You can view a program being broadcasted and one scheduled to follow. RED Change EPG mode. Programme Guide 1 YLE TV1 YELLOW Enter Timer Record/Remind setting mode. NOW 1 YLE TV1 2 YLE TV2 4 TV.. 5 YLE FST 6 CNN BLUE Enter Timer Record/Remind list mode. 8 YLE24 EPG (ELECTRONIC PROGRAMME GUIDE)(IN DIGITAL MODE) Select NOW or NEXT Programme. Select the Broadcast Programme. Your World Today Legenen om Den....
Button Function in Date Change Mode GREEN Switch off Date setting mode. Programme Guide 1 YLE TV1 ALL Change to the selected date. 1 YLE TV1 2 YLE TV2 5 YLE FST 6 CNN 8 YLE24 6 Apr. (Fri.) 14:00 4 TV.. Select a date. 6 Apr. 2007 15:09 ▲ ◄ ... ► 15:00 Kungskonsumente Antigues Roadshow The Drum Mint Extra TV2: Farmen The Drum You Call The Hits Fashion Essentials ... ... ... Tänään otsikoissa ▲ Date. Change Date Exit Switch off Date setting mode. or BACK or EXIT Switch off EPG.
EPG (ELECTRONIC PROGRAMME GUIDE) (IN DIGITAL MODE) Button Function in Record/Remind Setting Mode Sets a start or end time for recording, and sets only a start time for the reminder with the end time grayed out. This function is available only when recording equipment that use pin8 recording signalling has been connected to the TV-OUT(AV1) terminal, using a SCART cable. BACK Change to Guide or Schedule mode. Select the date to record. Date Start Time End Time Programme 6 Mar.
PICTURE CONTROL PICTURE SIZE (ASPECT RATIO) CONTROL You can watch the screen in various picture formats: 16:9, Just Scan, Original, Full Wide, 4:3, 14:9, Zoom and Cinema Zoom. If a fixed image is displayed on the screen for a long time, that fixed image may become imprinted on the screen and remain visible. You can adjust the enlarge proportion using ꕌꕍ button. This function works in the following signal. 1 Select the desired picture format.
PICTURE CONTROL • 4:3 The following selection will allow you to view a picture with an original 4:3 aspect ratio, gray bars will appear on both the left and right of the screen. • Zoom The following selection will allow you to view the picture without any alteration, while filling the entire screen. However, the top and bottom of the picture will be cropped. • 14 : 9 You can view a picture format of 14:9 or a gen eral TV programme in the 14:9 mode.
PICTURE WIZARD This feature lets you adjust the picture quality of the original image. Use this to calibrate the screen quality by adjusting the Black and White Level etc. General users can calibrate the screen quality by easily following each stage. When you adjust the image to Low, Recommended or High, you can see the changed result as an example. In RGB-PC / HDMI-PC mode, the changed Colour, Tint and H/V Sharpness values are not applied.
PICTURE CONTROL ꕊ ENERGY SAVING It reduces the TV’s power consumption. The default factory setting is adjusted to the comfortable level to be viewed at home. You can increase the brightness of your screen by adjusting the Energy Saving level or by setting the Picture Mode. When adjusting Energy Saving in MHEG mode, the Energy Saving setting is applied after MHEG is finished. Selecting ‘Screen Off’ while tuned to a radio station channel will reduce power consumption.
PRESET PICTURE SETTINGS Picture Mode-Preset Vivid Standard Cinema Sport Game Strengthen the contrast, brightness, colour and sharpness for vivid picture. The most general screen display status. Optimizes video for watching movies. Optimizes video for watching sports events. Optimizes video for playing games.
PICTURE CONTROL MANUAL PICTURE ADJUSTMENT Picture Mode-User option PICTURE CONTROL Backlight To control the brightness of the screen, adjust the brightness of LCD panel. Adjusting the backlight when setting the brightness of the set is recommended. Contrast Adjusts the signal level between black and white in the picture. You may use Contrast when the bright part of the picture is saturated. Brightness Adjusts the base level of the signal in the picture.
PICTURE IMPROVEMENT TECHNOLOGY You can calibrate the screen for each Picture Mode or set the video value according to the special video screen. You can set the video value differently for each input. To reset to the factory default screen after making adjustments to each video mode, execute the “Picture Reset” function for each Picture Mode.
PICTURE CONTROL EXPERT PICTURE CONTROL By segmenting categories, Expert 1 and Expert 2 provide more categories which users can set as they see fit, offering the optimal picture quality for users. This may also be used to help a professional optimize the TV performance using specific videos.
Dynamic Contrast (Off/Low/High) ■■ Adjusts the contrast to keep it at the best level according to the brightness of the screen. The picture is improved by making bright parts brighter and dark parts darker. Dynamic Colour (Off/Low/High ) ■■ Adjusts screen colours so that they look livelier, richer and clearer. This feature enhances hue, saturation and luminance so that red, blue, green and white look more vivid.
PICTURE CONTROL Expert Pattern (Off/Expert 1/Expert 2) ■■ This is the pattern necessary for expert adjustment. ■■ This function is enabled in "Picture Mode - Expert" when you watch DTV. Colour Filter (Off/Red/Green/Blue) ■■ This is the function to filter the specific colours of the video. You can use the RGB filter to set colour saturation and hue accurately. ■■ This is the function to adjust the overall colour of the screen to the feeling you want. a.
PICTURE RESET Settings of the selected picture modes BACK to the default factory settings. PICTURE Move PICTURE OK ▲ 50 • Brightness 50 • Sharpness 70 • Sharpness 70 • Colour 50 ➩ 0 • Colour 60 All picture setting will be resetted. • Tint 0 continue? • Colour Temperature0 ? • Colour Temperature0 • Advanced Control •• Picture Picture Reset Reset 3 ꔉ NO Screen Select PICTURE. Select Picture Reset.
PICTURE CONTROL SCREEN SETUP FOR PC MODE Selecting Resolution To view a normal picture, match the resolution of RGB mode and selection of PC mode. This function works in the following mode: RGB[PC] mode.
Auto Configure (RGB [PC] mode only) Automatically adjusts picture position and minimizes image instability. After adjustment, if the image is still not correct, your set is functioning properly but needs further adjustment. Auto configure This function is for automatic adjustment of the screen position, clock, and phase The displayed image will be unstable for a few seconds while the auto configuration is in progress. 1.
PICTURE CONTROL 2. Using Auto Config. (Remocon) This function is available for RGB signals only. M2080D / M2080DF / M2080DB / M2080DN 1 Auto Config. Press Auto Config. Auto in progress <1600 x 900 Resolution> Auto in progress For optimal display change resolution 1600 x 900 PICTURE CONTROL 82 2 M2280D / M2380D / M2780D / M2280DF / 2380DF / M2780DF M2280DB / M2380DB / M2280DN / M2380DN / M2780DN Auto Config. Press Auto Config.
Adjustment for screen Position, Size, Phase If the picture is not clear after auto adjustment and especially if characters are still trembling, adjust the picture phase manually. This function works in the following mode: RGB[PC]. PICTURE Move SCREEN OK ▲ • Brightness 50 • Sharpness 70 • Colour 50 • Tint ➩ 0 3 4 Position ► Phase • Picture Reset ꔉ Screen Screen 2 Auto Config. Size • Advanced Control MENU Prev. Reset Select PICTURE. Select Screen.
PICTURE CONTROL Screen Reset Returns Position, Size and Phase to the factory default settings. This function works in the following mode: RGB[PC]. PICTURE Move SCREEN OK ▲ • Brightness 70 • Colour 50 • Tint ➩ 0 • Colour Temperature0 PICTURE CONTROL 2 3 4 5 Position To Set Yes No Phase • Picture Reset ꔉ Screen Screen MENU Auto Config. Size • Advanced Control 1 Prev. Resolution 50 • Sharpness Move Reset ► Select PICTURE. Select Screen. Select Reset. Select Yes. Run Reset.
SOUND CONTROL AUTO VOLUME LEVELER AVL automatically remains on the same level of volume if you change programmes. Because each broadcasting station has its own signal conditions, volume adjustment may be needed every time the channel is changed. This feature allows users to enjoy stable volume levels by making automatic adjustments for each program.
SOUND CONTROL CLEAR VOICE II By differentiating the human sound range from others, it helps users listen to human voices better.
BALANCE You can adjust the sound balance of the speakers to preferred levels. AUDIO Move Auto Volume : Off Clear Voice II : Off ꕅ3 Balance Balance Sound Mode 0 : Music 3 : Off ➩ Move Auto Volume : Off Clear Voice II : Off ꕅ3 Balance Balance Sound Mode 0 Balance : Standard OK 0 0 • Surround X 50 • Treble 50 • Bass 50 • Bass 50 • Reset ▼ ▼ ꔉ ► :Close Off • Treble • Reset ◄ Select AUDIO. Select Balance. Make desired adjustment.
SOUND CONTROL PRESET SOUND SETTINGS-SOUND MODE You can select your preferred sound setting; Standard, Music, Cinema, Sport or Game and you can also adjust the Treble, Bass. Sound Mode lets you enjoy the best sound without any Special adjustment as the TV sets the appropriate sound options based on the programme content. Standard, Music, Cinema, Sport and Game are preset for optimum sound quality at the factory. Standard Music Cinema Sport Game Offers standard-quality sound.
PRESET SOUND SETTINGS-USER MODE AUDIO Move Auto Volume : Off Clear Voice II : Off ꕅ3 Balance Sound Sound Mode Mode 0 ꔉ : Standard Music (User) MENU 2 ➩ Move Auto Volume : Off Clear Voice II : Off ꕅ3 OK Balance Sound Sound Mode Mode 0 ꔉ : Standard Music (User) • Treble 50 • Surround Standard X : Off Music • Treble Music 50 • Bass 50 • Bass • Surround X 1 AUDIO OK : Off • Reset • Reset ▼ ▼ ꔉ Cinema 50 Sport Game Select AUDIO. Select Sound Mode.
SOUND CONTROL AUDIO RESET Settings of the selected Sound Mode return to the default factory settings. AUDIO Move AUDIO OK Move Sound Mode Sound Mode : Music • Surround X : • Treble 50 • Bass 50 SOUND CONTROL 2 3 MENU ꔉ : Music • Surround X : ➩ Off Reset •• Reset 1 OK ▲ ▲ • Treble Off 50 • Bass 50 Resetting sound mode configuration...
DIGITAL AUDIO OUT This function allows you to select your preferred Digital Audio Output. The TV can only output DOLBY Digital if a channel is broadcast with Dolby Digital audio. When Dolby digital is available, selecting Auto in the Digital Audio Out menu will set SPDIF (Sony Philips Digital InterFace) output to Dolby Digital. If Auto is selected in the digital audio out menu when dolby digital is not available, SPDIF output will be PCM (Pulse-code modulation).
SOUND CONTROL TV SPEAKERS ON / OFF SETUP You can adjust the TV internal speaker status. In AV1, AV2, COMPONENT, RGB and HDMI 1 or HDMI with HDMI to DVI cable, the TV speaker can be operational even when there is no video signal. If you wish to use an external Hi-Fi system, turn off the TV’s internal speakers.
DTV AUDIO SETTING (IN DIGITAL MODE ONLY) When different audio types exist in an input signal, this function allows you to select the audio type you want.
SOUND CONTROL I/II Stereo/Dual Reception (In Analogue Mode Only) When a programme is selected, the sound information for the station appears with the programme number and station name. 1 Select Audio. 2 Select the sound output. SOUND CONTROL Broadcast On Screen Display Mono Stereo Dual MONO STEREO DUAL I , DUAL II , DUAL I + II ■■Mono sound selection If the stereo signal is weak in stereo reception, you can switch to mono. In mono reception, the clarity of sound is improved.
NICAM Reception (In Analogue Mode Only) If the TV is equipped with a receiver for NICAM reception, high quality NICAM (Near Instantaneous Companding Audio Multiplex) digital sound can be received. Sound output can be selected according to the type of broadcast received. 1 When NICAM mono is received, you can select NICAM MONO or MONO. 2 When NICAM stereo is received, you can select NICAM STEREO or MONO. If the stereo signal is weak, switch to MONO.
TIME SETTING CLOCK SETUP The clock is set automatically when receiving a digital signal. (You can set the clock manually only if the TV has no DTV signal.) You must set the time correctly before using on/off timer function. When you select a Time Zone city, the TV time is set by the time offset information based on Time Zone and GMT (Greenwich Mean Time) which is received with the broadcast signal and the time is set automatically by a digital signal.
AUTO ON/OFF TIME SETTING The Off time function automatically switches the TV to standby at a preset time. Two hours after the TV is switched on by the on time function it will automatically switch back to standby mode unless a button has been pressed. The Off time function overrides the On time function if both are set to the same time. The TV must be in standby mode for the On time to work.
TIME SETTING SLEEP TIMER SETTING You do not have to remember to switch the TV off before you go to sleep. The sleep timer automatically switches the TV to standby after the preset time has elapsed. 1 2 Select Sleep Timer. Select Off, 10, 20, 30, 60, 90, 120, 180 or 240 min. • When you switch the TV off, the preset sleep timer is cancelled. • You can also adjust Sleep Timer in the TIME menu.
OPTION SETTING ON-SCREEN MENU LANGUAGE / COUNTRY SELECTION The installation guide menu appears on the TV screen when it is switched on for the first time. 1 Select your desired language. 2 Select your country. • If you want to change Language/ Country selection 1 MENU Select OPTION. 2 Select Menu Language or Country. 3 4 • When France is selected for Country, password is not '0' , '0' , '0' , '0' but '1' , '2' , '3' , '4' . Select your desired language or country. Save.
OPTION SETTING LANGUAGE SELECTION (IN DIGITAL MODE ONLY) The Audio function allows selection of a preferred language. If audio data in a selected language is not broadcast, the default language audio will be played. Use the Subtitle function when two or more subtitle languages are broadcast. If subtitle data in a selected language is not broadcast, the default language subtitle will be displayed.
AUDIO DESCRIPTION (IN DIGITAL MODE ONLY) This function is for the blind, and provides explanatory audio describing the current situation in a TV programme in addition to the basic audio. When Audio Description On is selected, basic audio and Audio Description are provided only for those programmes that have Audio Description included.
OPTION SETTING DATA SERVICE (This menu is enabled only in Ireland. ) This function allow users to choose between MHEG (Digital Teletext) and Teletext if both exist at the same time. If only one of them exists, either MHEG or Teletext is enabled regardless of which option you selected.
INPUT LABEL Selects a label for each input source.
OPTION SETTING POWER INDICATOR Select the power indicator on of off. Power indicator On - Normal Mode: Blue LED On. - Off Mode: LED Off Power indicator Off - Normal Mode: Blue LED Off.
DEMO MODE Display the slide show to explain the various logo of this TV. It is not possible to use Demo Mode in Home Use mode. In Store Demo, Demo Mode is automatically set to On. Once Demo Mode is set to Off in Store Demo, Demo Mode does not run and only the screen is reset. The screen is reset automatically after 5 minutes in Demo Mode.
OPTION SETTING MODE SETTING We recommend setting the TV to “Home Use” mode for the best picture in your home environment. “Store Demo” mode is an optimal setting for displaying at stores.. OPTION Move OPTION OK : - - Set ID :1 Set ID :1 Power Indicator : On Power Indicator Demo Mode : Off Demo Mode Selecting the environment. : On Choose the setting mode you want.
INITIALIZING(RESET TO ORIGINAL FACTORY SETTINGS) This function initializes all settings. But the settings of ꕋ Day and ꕋ Night of the Picture Mode cannot be initialized. It is useful to initialize the product or when you move to other city or country. When the Factory Reset is completed, you must restart the Initializing setup. When the Lock System menu is "On", the message to enter the password appears.
PARENTAL CONTROL / RATINGS SET PASSWORD & LOCK SYSTEM Enter the password, press ‘0’, ‘0’, ‘0’, ‘0’ on the remote control handset. When France is selected for Country, password is not ‘0’, ‘0’, ‘0’, ‘0’ but ‘1’,’2’,’3’,’4’. When France is selected for Country, password cannot be set as ‘0’, ‘0’, ‘0’, ‘0’. If a channel is locked, enter the password to unlock it temporarily.
BLOCK PROGRAMME Blocks any programmes that you do not want to watch or that you do not want your children to watch. This function is available in Lock System “On”. Enter a password to watch a blocked programme. 1 LOCK Move YLE TV1 OK Set Password Lock System : ON •• Block Block Programme Programme ꔉ • Parental Guidance ➩ • Input Block Key Lock : Off Pr.
PARENTAL CONTROL / RATINGS PARENTAL CONTROL (IN DIGITAL MODE ONLY) This function operates according to information from the broadcasting station. Therefore if the signal has incorrect information, this function does not operate. A password is required to gain access to this menu. This set is programmed to remember which option it was last set to even if you switch the set off. Prevents children from watching certain adult’s TV programmes, according to the ratings limit set.
INPUT BLOCK Enables you to block an input. It is available to use this function in Lock System ”On”. LOCK Move LOCK OK Set Password Lock System OK Set Password : ON Lock System • Block Programme • Parental Guidance • Input Block Key Lock Move ➩ ꔉ : Off Key Lock : ON AV1 • Block Programme AV2 • Parental Guidance Component • Input Block ꔉ RGB : Off ◄ Off ► Off Off Off HDMI1 Off HDMI2 Off Close 1 Select LOCK. 2 Select Input Block. 3 Select input source. 4 Select On or Off.
PARENTAL CONTROL / RATINGS KEY LOCK The TV can be set so that the remote control is required to control it. This feature can be used to prevent unauthorized viewing. LOCK Move LOCK OK Set Password Lock System Lock System • Parental Guidance ➩ MENU • Parental Guidance • Input Block Key Lock Lock Key ::Off ꔉ Off Off On On ꔉ • In Key Lock ‘On’, if the TV is turned off, press Select LOCK 2 Select Key Lock.
TO USE A USB DEVICE WHEN CONNECTING A USB DEVICE When you connect a USB device, this pop up menu is displayed, automatically. “POP UP MENU” will not be displayed while the OSD including Menu, EPG or Schedule list is activated or while the Bluetooth Headset is connected. When the Pop Up menu does not appear, you can select Music List, Photo List or Movie List in the USB menu. In USB device, you can not add a new folder or delete the existing folder.
TO USE A USB DEVICE Precautions when using the USB device TO USE A USB DEVICE 114 ►►Only a USB storage device is recognizable. ►►If the USB storage device is connected through a USB hub, the device is not recognizable. ►►A USB storage device using an automatic recognition programme may not be recognized. ►►A USB storage device which uses its own driver may not be recognized. ►►The recognition speed of a USB storage device may depend on each device.
PHOTO LIST You can view photo files on USB storage device. The On Screen Display may be different from your TV. Images are an example to assist with the TV operation. When you are watching the photo by the Photo List function, you can not change the picture mode. PHOTO(*.JPEG) supporting file Baseline : 64 x 64 to 15360 x 8640 Progressive : 64 x 64 to 1920 x 1440 • You can play JPEG files only. • Non-supported files are displayed in the form of predefined icon.
TO USE A USB DEVICE Photo Selection and PopUp Menu Photo List Page 2/3 Drive1 SGKIM001 1366x768, 125KB Up Folder Navigation No Marked Up Folder SG103 02/12/2010 SG101 02/12/2010 SG104 02/12/2010 SG102 02/12/2010 SG105 02/12/2010 SGKIM001 02/12/2010 SGKIM005 02/12/2010 SGKIM002 02/12/2010 SGKIM006 02/12/2010 SGKIM003 02/12/2010 SGKIM007 02/12/2010 SGKIM004 02/12/2010 SGKIM008 02/12/2010 Popup Menu Page Change MARK Mark Exit ➩ Photo List Page 2/3 Drive1 SGKIM001 Up
How to view photo Detailed operations are available on full-sized photo view screen.
TO USE A USB DEVICE 6 ◄ Slideshow ꘡ BGM ꘡ 1/17 ꘤ Delete ► Q.MENU Option Hide Select the Slideshow , BGM, ꘤(Rotate), Delete , Option or Hide. • Use < > button to select the previous or next photo. • Use < > button to select and control the menu on the full-sized screen. ►►Slideshow : When no picture is selected, all photos in the current folder are displayed during slide show. If some photos are selected, those photos are displayed in a slide show.
Using the Photo List function Choose Options. Set Photo View Set Video. ◄ Slideshow ꘡ 1/17 ꘤ BGM ꘡ Set Audio. ► Delete Q.MENU Option Hide ꕉ Previous 1 Show the PopUp menu. 2 Select Set Photo View, Set Video or Set Audio. ►When ► you select the Set Photo View, Set Photo View. Slide Speed ◄ Music Folder Fast ► ... Repeat ◄ On ► Random ◄ Off ► 1 Show the Slide Speed or Music Folder. 2 Make appropriate adjustments.
TO USE A USB DEVICE ►When ► you select the Set Video, Set Video. Picture Mode ◄ Vivid ► ● Dynamic Contrast ◄ Medium ► ● Noise Reduction ◄ Medium ► ● Backlight 100 ● Contrast 100 ● Brightness 50 ● Colour 50 ● Picture Reset ꕉ Previous 1 Make appropriate adjustments.(Refer to p. 74, 77, 78) ►When ► you select the Set Audio, Set Audio.
MUSIC LIST You can play music files on USB storage device. Purchased music files(*.MP3) may contain copyright restrictions. Playback of these files may not be supported by this model. Music file on your USB device can be played by this unit. The On Screen Display may be different from your TV. Images are an example to assist with the TV operation. MUSIC (*.MP3) supporting file Bit rate 32 to 320 • Sampling rate MPEG1 Layer3: 32 kHz, 44.1 kHz, 48 kHz • Sampling rate MPEG2 Layer3: 16 kHz, 22.
TO USE A USB DEVICE Music Selection and PopUp Menu As shown, up to 6 music titles are listed per page. Music List No Marked Duration Up Folder 00:00/01:34 Up Folder Navigation Page 2/3 Title Music SGKIM003 SGKIM001 03:33 SGKIM002 04:45 SGKIM003 01:30 SGKIM004 02:37 SGKIM005 01:58 Popup Menu MARK Page Change Mark Q.
■■ If you don't press any button for a while during the playing, the play information box (as shown in the below) will float as a screen saver. ■■ The ‘Screen Saver’? Screen saver is to prevent screen pixel damage due to an fixed image remaining on the screen for a extended period of time. Music S003 ► 0:27 / 3:67 Q.MENU Option ! NOTE ►When ► a music file is played, ♪ is displayed behind the title. ►A ► damaged or corrupted music does not play but displays 00:00 in play time.
TO USE A USB DEVICE ►When ► you select the Set Audio Play, Set Audio Play. ◄ Repeat Random On ► Off ꕉ Previous 1 Show the Set Audio Play. 2 Make appropriate adjustments. • When “Off” is selected in Repeat menu, replay will stop once the last file in the list finishes playing. But, when “►►” button is pressed while the last fine in the list is in the middle of replay and “Repeat” is in “Off” position, the first file in the list will be played and “Repeat” menu will be activated.
MOVIE LIST You can play movie files on a USB storage device. The movie list is activated once USB is detected. It is used when playing movie files on TV. Displays the movies in the USB folder and supports Play. Allows playback of all movies in the folder and user desired files. It is a movie list that displays folder information and movie file. The On Screen Display may be different from your TV. Images are an example to assist with the TV operation. TO USE A USB DEVICE Movie(*.dat / *.mpg / *.mpeg / *.
TO USE A USB DEVICE File Max Resolution Video Decoder Audio Codec mpeg, vob MPEG1, MPEG2 Dolby Digital, MPEG, MP3, LPCM dat MPEG1 Dolby Digital, MPEG, MP3, LPCM ts,trp,tp MPEG2, H.264 / AVC Dolby Digital, AAC, MPEG xtension name MPEG4 SP, MPEG4 ASP, Divx 3.11, Dvix 4.12, Dvix 5.x mp4 Dolby Digital, HE-AAC, Dvix 6, Xvid 1.00, Xvid 1.01, Xvid 1.02, Xvid 1.03 AAC, MPEG, MP3, LPCM Xvid 1.10–beta 1, Xvid 1.10-beta 2, H.264/AVC 1920 x 1080 @ 30p MPEG 2, MPEG 4 SP, MPEG4 ASP, Divx 3.
Movie Selection and PopUp Menu Movie List Page 2/3 No Marked Title Movie SGKIM002 Duration Up Folder Favorite Music SGKIM001 640x480, 720KB Up Folder Navigation SGKM002 01:34:15 SGKIM001 01:35:30 SGKIM001 01:30:20 Popup Menu Page Change MARK Mark Exit ➩ Movie List Page 2/3 No Marked Title Movie SGKIM002 Duration 1366x768, 125KB Up Folder Play Favorite Music SGKIM001 1 Close SGKIM001 Up Folder Navigation Delete SGKM002 640x480, 720KB Popup Menu 01:34:15 01:35:30 01:30:20
TO USE A USB DEVICE Using the Movie List function, play Choose Options. Set Video Play. Set Video. Set Audio. ꕉ Previous Q.MENU 1 Option Show the PopUp menu. 2 Select Set Video Play, Set Video or Set Audio.
►When ► you select the Set Video Play, ◄ Picture Size Audio Language Subtitle Language Full ► 1 Off . Sync 0 . Position 0 ꕉNormal Previous . Size ꕉ Previous ►►Picture Size: Selects your desired picture format during movie play. ►►Audio Language & Subtitle Language: Changes the Language Group of the audio/subtitle during movie play. ►►Sync: Adjusts the time synchronisation of the subtitle from -10 secs to +10 secs by steps of 0.5 secs during movie play.
TO USE A USB DEVICE ►When ► you select the Set Video, Set Video. Picture Mode ◄ Vivid ► ● Dynamic Contrast ◄ Medium ► ● Noise Reduction ◄ Medium ► ● Backlight 100 ● Contrast 100 ● Brightness 50 ● Colour 50 ● Picture Reset ꕉ Previous 1 Make appropriate adjustments.(Refer to p. 74, 77, 78) ►When ► you select the Set Audio, Set Audio.
Using the remote control ◄◄ / ►► When playing, repeatedly, press the REW(◄◄) button to speed up ◄◄(x2) → ◄◄◄ (x4) → ◄◄◄◄(x8) → ◄◄◄◄◄(x16) →◄◄◄◄◄◄(x32) . repeatedly, press the FF(►►) button to speed up ►►(x2) → ►►► (x4) → ►►►► (x8) → ►►►►►(x16) → ►►►►►►(x32). ■ Pressing these buttons repeatedly increases the fast forward/reverse speed. During playback, press the Pause (II) button. ■ Still screen is displayed.
TO USE A USB DEVICE DIVX REGISTRATION CODE Confirm the DivX registration code number of the TV. Using the registration number, movies can be rented or purchased at www.divx.com/vod. With a DivX registration code from other TV, playback of rented or purchased DivX file is not allowed. (Only DivX files matched with the registration code of the purchased TV are playable.) USB Move USB OK Photo List Photo List Music List Music List Movie List DivX DivX Reg. Reg.
DEACTIVATION The purpose of deactivation is to allow deactivation of devices for users who have activated all the available devices through the web server and are blocked from activating more devices. DivX VOD allowed the consumer to activate up to 6 devices under one account, but to replace or deactivate any of those devices, the consumer had to contact DivX Support and request deletion.
TELETEXT This feature is not available in all countries. Teletext is a free service broadcast by most TV stations which gives up-tothe-minute information on news, weather, television programmes, share prices and many other topics. The teletext decoder of this TV can support the SIMPLE, TOP and FASTEXT systems. SIMPLE (standard teletext) consists of a number of pages which are selected by directly entering the corresponding page number.
FASTEXT The teletext pages are colour coded along the bottom of the screen and are selected by pressing the corresponding coloured button. ■■ Page selection 1 Press the T.OPT button and then use ꕌꕍ button to select ꔻ menu. Display the index page. 2 You can select the pages which are colour coded along the bottom line with corresponding coloured buttons. 3 AS with SIMPLE teletext mode, you can select a page by entering its three digit page number with the NUMBER buttons in FASTEXT mode.
DIGITAL TELETEXT *This function works in UK, Ireland only. The TV gives you access to digital teletext which is greatly improved in various aspects such as text, graphics etc. This digital teletext can access special digital teletext services and specific services which broadcast digital teletext. You should select off in the subtitle language menu to display teletext by pressing the SUBTITLE button.
APPENDIX TROUBLESHOOTING The operation does not work normally. The remote control doesn’t work ■■ Check to see if there is any object between the product and the remote control causing obstruction. Ensure you are pointing the remote control directly at the set. ■■ Ensure that the batteries are installed with correct polarity (+ to +, - to -). ■■ Ensure that the correct remote operating mode is set: TV, VCR, etc. ■■ Install new batteries.
APPENDIX The video function does not work. Poor reception on some channels Lines or streaks in pictures No picture when connecting HDMI ■■ Station or cable product experiencing problems, tune to another station. ■■ Station signal is weak, reorient antenna to receive weaker station. ■■ Check for sources of possible interference. ■■ Check antenna (Change the direction of the antenna). ■■ Check that your HDMI cable is High Speed HDMI Cable.
There is a problem with PICTURE settings. When the user changes the picture settings, the TV automatically converts back to the initial settings after a certain period of time. ■■ It means that the TV is currently set to Store Demo mode. To switch to Home use mode you should do the followings: From the TV Menu, choose OPTION → Choose Mode Setting → Choose Home use. Now, you have completed switching to the Home use mode. Only PC mode applied No image is displayed.
APPENDIX Screen color is abnormal. Screen has poor color resoluion (16_colors). ■■ Set screen color resolution to more than 24 bits (true color) Select control Pane → Display → Settings → Color Table menu in Windows. Screen color is unstable or mono color. ■■ Check the connection status of the signal cable. Do back spots appear on the screen? ■■ Several pixels (red, green, white or black color) may appear on the screen, which can be attributable to the unique characteristics of the LCD panel.
MAINTENANCE Early malfunctions can be prevented. Careful and regular cleaning can prolong the life of your new set. Caution: Be sure to switch the power off and unplug the power cord before you begin any cleaning. Cleaning the Screen 1 A good way to keep the dust off your screen for a while is to wet a soft cloth in a mixture of lukewarm water and a little fabric softener or dish washing detergent. Wring the cloth until it is almost dry, and then use it to wipe the screen.
APPENDIX PRODUCT SPECIFICATIONS M2080D / M2080DF / M2080DB / M2080DN 508.5 mm Wide (20.0 inch) TFT (Thin Film Transistor) LCD Panel Video Signal Screen Type Visible diagonal size: 508.5 mm Pixel Pitch 0.2766 mm (H) x 0.2766 mm (V) Max.
M2280D / M2280DF / M2280DB / M2280DN 546.86 mm Wide (21.53 inch) TFT (Thin Film Transistor) LCD Panel Video Signal Screen Type Visible diagonal size: 546.86 mm Pixel Pitch 0.248 mm (H) x 0.248 mm (V) Max.
APPENDIX M2380D / M2380DF/ M2380DB / M2380DN 584.2 mm Wide (23 inch) TFT (Thin Film Transistor) LCD Panel Video Signal Screen Type Visible diagonal size: 584.2 mm Pixel Pitch 0.265 mm (H) x 0.265 mm (V) Max.
M2780D / M2780DF / M2780DN 685.8 mm Wide (27 inch) TFT (Thin Film Transistor) LCD Panel Video Signal Screen Type Visible diagonal size: 685.8 mm Pixel Pitch 0.3114 mm (H) x 0.3114 mm (V) Max.
APPENDIX IR CODES • This feature is not available for all models. Code (Hexa) 95 Energy Saving Note R/C BUTTON 08 POWER R/C BUTTON (POWER ON/OFF) 50 TV / PC R/C BUTTON 0B INPUT R/C BUTTON 79 RATIO R/C BUTTON F0 TV/RAD R/C BUTTON 45 Q.
EXTERNAL CONTROL DEVICE SETUP RS-232C Setup Connect the RS-232C (serial port) input jack to an external control device (such as a computer or an A/V control system) to control the product’s functions externally. Connect the serial port of the control device to the RS-232C jack on the product back panel. Note: RS-232C connection cables are not supplied with the product. Type of Connector; D-Sub 9-Pin Male No.
APPENDIX Set ID Use this function to specify a set ID number. Refer to ‘Real Data Mapping’. ► p.
Communication Parameters ■■ Baud rate: 9600 bps (UART) ■■ Data length: 8 bits ■■ Parity : None ■■ Stop bit: 1 bit ■■ Communication code: ASCII code ■■ Use a crossed (reverse) cable. Transmission / Receiving Protocol Transmission Command Reference List COMMAND COMMAND 1 2 DATA (Hexadecimal) [Command1][Command2][ ][Set ID][ ][Data][Cr] * [Command 1] : * [Command 2] : : * [Set ID] 01. Power k a 00 to 01 02. Aspect Ratio k c Refer to p. 150 03. Screen Mute k d 00 to 01 04.
APPENDIX 01. Power (Command: k a) ►► To control Power On/Off of the set. Transmission [k][a][ ][Set ID][ ][Data][Cr] Data 00 : Power Off Ack 01 : Power On [a][ ][Set ID][ ][OK/NG][Data][x] ►► To show Power On/Off. Transmission 03. Screen Mute (Command: k d) ►► To select screen mute on/off.
07. Brightness (Command: k h) ►► To adjust screen brightness. You can also adjust brightness in the PICTURE menu. Transmission [k][h][ ][Set ID][ ][Data][Cr] Data Min : 00 to Max : 64 * Refer to ‘Real data mapping 1’. See page 153. Ack 11. OSD Select (Command: k l) ►► To select OSD (On Screen Display) on/off when controlling remotely. Transmission [k][l][ ][Set ID][ ][Data][Cr] Data 00 : OSD off Ack 01 : OSD on [h][ ][Set ID][ ][OK/NG][Data][x] [l][ ][Set ID][ ][OK/NG][Data][x] 08.
APPENDIX 15. Balance (Command: k t) 18. Auto Configure(Command: j u) ►► To adjust balance. You can also adjust balance in the AUDIO menu. Transmission ►► To adjust picture position and minimize image shaking automatically. It works only in RGB (PC) mode. Transmission [k][t][ ][Set ID][ ][Data][Cr] [j][u][ ][Set ID][ ][Data][Cr] Data Min : 00 to Max : 64 * Refer to ‘Real data mapping 1’. See page 153. Ack Data 01: To set Ack [t][ ][Set ID][ ][OK/NG][Data][x] 16.
20. Programme Add/Skip(Command: m b) ►► To set skip status for the current Programme.
UK Only
Make sure to read the Safety Precautions before using the product. Keep the Owner’s Manual (CD) in an accessible place for future reference. The model and serial number of the SET is located on the back and one side of the SET. Record it below should you ever need service.