- LG - Life's Good Hunting Equipment User Manual

Your Model 9422 will now be in these pieces:

(see Figure 8):

REASSEMBLY —

1. Assemble bolt and bolt slide, keeping cam pin centered

(see Figure 9).

2. Insert assembly into the receiver from rear, pushing for-

ward until it locks (see Figure 10).

3. Pull hammer back to full-cock position and close finger

lever.

Center the cam pin

in the hole

Insert the cam pin into the hole

in the breech bolt

Cam pin

Barrel/Forearm

half

Buttstock half

Bolt slide

Magazine tube

Breech bolt

Takedown screw

FIGURE 8

FIGURE 9

Make sure the breech bolt

and bolt slide fit into the rails

in the receiver

FIGURE 10

• Barrel/forearm half

• Buttstock half

• Breech bolt

• Bolt slide

• Cam pin

• Magazine tube

• Takedown screw