Easy Setup Guide Specification 47WV30MS/47WV30BR/ 47WV30BS/47WV30BAAM/ 47WV30-BAAL SUFFIX World Wide 2. 관 리 자 MK PARK H.J LEE 12.06.15 12.06.15 1. Model Description MODEL 담 당 BRAND Product Name LG Part No. No JO KIM 12.06.15 MFL67559901 (1207-REV01) Signage Printing Specification 1. Trim Size (Format) : 172 mm x 243 mm 2. Printing Colors ( ) Cover : 1 COLOR (BLACK) Inside : 1 COLOR (BLACK) 3. Stock (Paper) Cover : Coated paper, Snow White 150 g/㎡ Inside : Uncoated paper, 백상지 60 g/㎡ 4.
Pagination sheet Total pages : 280 pages Front cover English 2 3 … ČESKY 2 3 … … … 27 ESPAÑOL 2 3 … … … 27 FRANÇAIS 2 3 … DEUTSCH 2 3 … … … 27 ΕΛΛΗΝΙΚΑ 2 3 … … … 27 ITALIANO 2 3 … … … 27 2 3 … … … 27 2 3 … 2 3 … POLSKI SLOVENČINA PORTUGUÊS … … … … … … … … 27 27 27 27 Back cover
ENG ENGLISH Easy Setup Guide MONITOR SIGNAGE Please read this manual carefully before operating your set and retain it for future reference. MONITOR SIGNAGE MODELS 47WV30MS 47WV30BR 47WV30BS 47WV30-BAAM 47WV30-BAAL P/NO : MFL67559901(1207-REV01) Printed in Korea www.lg.
2 PRECAUTION PRECAUTION ENGLISH ENG Precaution in movement Adhere to the warning signs printed on the Box. Do not Clamp. Do not drop from stacking. Do not drop from clamping. 4 Persons needed for transport 2 Persons needed for transport Do not transport horizontally. Load with care. Do not drop from carrying. Don’t tumble the Set box sideward down. Don’t lie on or lean on the Set box.
PRECAUTION 3 Precaution in Handling CAUTION This way up/ Fragile/ Keep away from rain/ Stacking limit 4. ENG ENGLISH Move the Set as a team of 2 persons. When you move the bare Set, please use one hand on grabbing the handle and the other support under the Set.
4 PRECAUTION Causes & Phenomena of the Line Defect ENGLISH ENG The line defect would occur on your Set if you strike on the edge of the Set.
PRECAUTION 5 CAUTION ENG ENGLISH Panel Panel Panneau Panello Panel Panel 10 cm 10 cm 20 cm 10 cm 10 cm Be careful not to collide the sets with the floor or with each other. Install in the space with enough airflow.
6 ASSEMBLING AND PREPARING ASSEMBLING AND PREPARING ENGLISH ENG Unpacking Check your product box for the following items. If there are any missing accessories, contact the local dealer where you purchased your product. The illustrations in this manual may differ from the actual product and accessories. Power Cord RGB Cable DVI Cable CD (Owner's Manual, SuperSign Program, SuperSign Manual) / Card POWER ENERGY MONITOR INPUT OFF ON SAVING .
ASSEMBLING AND PREPARING 7 Dimensions (Width x Height x Depth) / Weight ENG ENGLISH 1047 mm x 592 mm x 91.1 mm / 29 kg To view the User’s guide “Insert CD ROM” in Computer CD-ROM will open automatically.(for Window only) My computer Digital_LG(CD-ROM) Index.
8 ASSEMBLING AND PREPARING Installing the Product ENGLISH ENG 1 Cut Packing Strap of the Box. 3 Open the Box and remove the top packing. 5 Open the Poly Bag. 2 Cut Tape on the Box. 4 Remove the Upper Box. 6 Undress the Poly Bag.
ASSEMBLING AND PREPARING 7 9 8 ENG ENGLISH Lift up the Set using the SIDE/BACK Handle. Remove Bottom packing when lifting up the Set. 9 With one hand under the set and the other hand grabbing the set, move the set. 10 Lay the back of the Set down on the table.
10 12 ASSEMBLING AND PREPARING 13 ENGLISH ENG Use the cushion or Pad when you lay the face of the Set downward. 14 15 Connect IR receiver to use remocon. And then, connect power code.
ASSEMBLING AND PREPARING Remove the L-brackets from each corner of the monitor before installing it. Tiling Displays How to Join Sets - Installing Set 1 *Example of 2 x 2 tiling The numbers assigned in this example (#1, #2, #3, #4) are used to demonstrate the installation procedure to ensure it is easy to follow. These numbers have nothing to do with the Set ID that is used to operate the remote control.
12 ASSEMBLING AND PREPARING How to Join Sets - Installing Set 2 ENGLISH ENG Join Set 2 to Set 1 using the guide brackets on the top side of Set 1 and mount the two sets to the wall mount plate or the wall. Remove the guide brackets after mounting the sets. How to remove the guide brackets Unscrew the guide bracket screws from the rear of the set and remove the guide brackets. Once the screws are removed, the guide brackets will drop.
ASSEMBLING AND PREPARING 13 How to Join Sets - Installing Set 3 #2 #1 #3 Minimize the space between the sides of the sets using the U-shaped fixture. When the sets are joined with the minimum amount of space between them, firmly mount them to the wall mount plate or the wall. When the sets are firmly mounted to the wall, remove the U-shaped fixtures.
14 ASSEMBLING AND PREPARING How to Join Sets - Installing Set 4 ENGLISH ENG Loosely mount Set 4 to the wall mount plate or the wall and minimize the space between the sets using the U-shaped fixtures. When Set 4 is firmly mounted to the wall, remove the U-shaped fixtures. Remove the guide brackets. See . Now the 2 x 2 tiling is complete. You can tile in various combinations, such as 3 x 3.
15 REMOTE CONTROL REMOTE CONTROL ENG ENGLISH The descriptions in this manual are based on the buttons of the remote control. Please read this manual carefully and use the Monitor set correctly. POWER ENERGY MONITOR INPUT OFF ON SAVING 1 4 7 .,! To replace batteries, open the battery cover, replace batteries (1.5 V AAA) matching and ends to the label inside the compartment, and close the battery cover. To remove the batteries, perform the installation actions in reverse.
16 REMOTE CONTROL POWER ENERGY MONITOR INPUT OFF ON SAVING ENGLISH ENG 1 4 7 .,! 2 5 8 0 ABC GHI PQRS 1/a/A JKL TUV -*# 3 6 9 DEF MNO WXYZ CLEAR MARK ARC P PSM BRIGHT A NESS G E MUTE MENU AUTO S.MENU OK BACK TILE EXIT ID ON MENU Selects a menu. Clears all on-screen displays and returns to Set viewing from any menu. Up/Down/Left/Right Allows you to navigate the on-screen menus and adjust the system settings to your preference.
MAKING CONNECTIONS 17 MAKING CONNECTIONS 1 Find an external device you want to connect to your Monitor set shown on the following illustration. 2 Check the connection type of the external device. 3 Go to the appropriate illustration and check the connection details.
AUDIO OUT DVI OUT HDMI OUT (CONTROL) (RGB/DVI) AUDIO DVI IN CONTROL IN REMOTE DVI OUT USB RGB OUT AUDIO OUT /DVI RGB IN RGB OUT CONTROL IN REMOTE (RGB/DVI) AUDIO LAN PB VIDEO PR AV IN L AUIDO COMPONENT IN R (8Ω) SPEAKER ENGLISH ENG RS-232C 18 MAKING CONNECTIONS < 47WV30MS/47WV30BR > RED WHITE RED BLUE GREEN
CONTROL IN REMOTE (RGB/DVI) AUDIO DVI IN USB RGB OUT AUDIO OUT /DVI RGB IN RGB OUT CONTROL IN REMOTE (RGB/DVI) AUDIO LAN AUDIO VIDEO PB PR L COMPONENT IN BLUE AUDIO OUT DVI OUT R AUDIO WHITE DVI OUT HDMI OUT (CONTROL) (8Ω) SPEAKER RED ENG ENGLISH RS-232C MAKING CONNECTIONS RED GREEN 19 < 47WV30BS/47WV30-BAAM/47WV30-BAAL >
20 MAKING CONNECTIONS Connecting to a USB Connecting the Power code ENGLISH ENG or 2 1 Connecting to the LAN LAN connection Power button A Using a router(Switching Hub) LAN POWER ENERGY MONITOR Switching Hub INPUT OFF ON SAVING Product .,! ABC DEF PC NOTE B Using the Internet. POWER MONITOR ON ENERGY INPUT INPUT OFF SAVING 1 .,! 2 ABC 3 DEF Select an input signal.
MAKING CONNECTIONS 21 Daisy Chain Monitors ENG ENGLISH RGB Cable 15-pin D-Sub Signal Cable (Max 3m) Set 1 Set 2 Set 3 Set 4 DVI Cable DVI Cable (Max 3m) DVI-OUT DVI-IN Set 1 DVI-OUT Set 2 DVI-IN DVI-OUT DVI-IN Set 3 NOTE "Input signal may be degraded or lost when multiple monitors are connected. For DVI, in general, up to 12 monitors can be connected via the DVI Out port (at the recommended resolution) if the signal is stable and there is no cable loss.
22 MULTIVISION CONFIGURATION MULTIVISION CONFIGURATION ENGLISH ENG Function Setting 3 Set ID setup for each set. 1 IR Receiver connection. OPTION Move OK • Language AUDIO (RGB/DVI) • ISM Method : Normal • DPM Select : Off • Fail Over : Off • Factory Reset • Set ID REMOTE CONTROL IN ꔋ :1 • Tile Mode • Portrait Mode • Fan • Product/Service Info. 4 IR Receiver removal for all sets except for Set 1. 5 RGB connection.
MULTIVISION CONFIGURATION 23 6 Connect the Monitor sets, in series, using an RS-232C cable. ENG ENGLISH RS-232C Cable PC Set 1 Set 2 7 Installation Menu setup. Installation Menu (V 2.21) LG Digital Signage Setup White Balance Adjust Password Change Configuration Cloning MCU Version V1.02.08 OK 8 Tile Mode setup. OPTION Move OK • Language • ISM Method : Normal • DPM Select : Off • Fail Over : Off • Factory Reset • Set ID :1 • Tile Mode • Portrait Mode • Fan • Product/Service Info.
24 MULTIVISION CONFIGURATION Setting the Installation Menu ENGLISH ENG 1 If you press the MENU button on the remote control for more than five seconds, the main menu appears and then disappears. The input data is also displayed in the upper left corner of the screen. RGB LG Digital Signage Setup (V2.
MULTIVISION CONFIGURATION Decide to work all functions of 'Signage Mode Operation' or not. 15Min Force Off Turns off the monitor if there is no input for more than 15 minutes. "No" is the recommended default value setting. 4 hours off Turns off the monitor if there is no input on the remote control for more than four hours. "No" is the recommended default value setting. Wake On LAN Turns on the monitor remotely using LAN. Total Set ID Sets the maximum value for picture IDs.
26 MULTIVISION CONFIGURATION Setting the Tile Mode • 2X1: ENGLISH ENG • 2X2: When using four monitors When using two monitors Tile Mode Off: An input image is not enlarged, and the same image is shown on all connected monitors. Tile Mode On: An input image is enlarged according to the value in the H. Set Count and V. Set Count fields. ID 2 ID 1 In Tile Mode you can view an image in a larger scale by connecting multiple monitors.
MULTIVISION CONFIGURATION 27 Setting the Picture ID 2 If you press the left/right buttons or press the ON button repeatedly, the Picture ID cycles through OFF and 1 to 4.Assign the ID you want. Picture ID Off Close AUDIO (RGB/DVI) RS-232C OUT RS-232C OUT RS-232C OUT RS-232C IN RS-232C IN RS-232C IN REMOTE CONTROL IN IR Receiver Picture ID Off Close 2X2 Multi-Vision (Total Set ID: 4) Set IDs are assigned as shown in the picture. 1 Press the ID On (Red) button on the remote control.