OWNER’S MANUAL WASHING MACHINE Please read this manual carefully before operating your washing machine and retain it for future reference. WT-H9556 WT-H8006 P/No.: MFL42065498 www.lg.
P roduct Features The Turbo Drum DD washing machine does not operate with the lid open. If the lid is opened during wash, rinse and spin cycles, the machine will stop automatically. Please close the door gently. Closing the door in an agressive manner can cause damage and or injury. sensors The sensor automatically detects the quantity of Detergent put in by a user and the temperature and quality of the water to produce the best algorithm for washing and rinsing, to give the best washing results.
C . e ontents READ THIS MANUAL Inside you will find many helpful hints on how to use and maintain your washer properly. Just a little preventive care on your part can save you a great deal of time and money over the life of your washer. You will find many answers to common problems in the Troubleshooting section. If you review our chart of Troubleshooting Tips first, you may not need to call for service at all. Introduction ults.
Introduction S afety Information Read carefully and thoroughly through this booklet as it contains important safety information that will protect the user from unexpected dangers and prevent potential damages to the product. This section is divided into 2 parts : Warning and Caution. : This is a warning sign specifying user’s applications which might be dangerous. : This is a sign specifying ‘Strictly Forbidden’ applications.
ct. S afety Information Warning • Keep the area underneath and around your appliances free of combustible materials such as lint, paper, rags, chemical, etc. Operating with such materials around the machine may trigger explosion or fire. • Close supervision is necessary if this appliance is used by or near children. Do not allow children to play on, with, or inside this or any other appliance. There is potential danger that children might drown or suffocate in the tub.
Introduction S afety Information NOTE This machine has been designed for normal indoor domestic use. WHEN USING THE WASHER Warning Do not use a plug socket and wiring equipment for more than their rated capacity. Exceeding the limit may lead to electric shock, fire , break down, and/or deformation of parts. Do not mix chlorine bleach with ammonia or acids such as vinegar and/or rust remover. Mixing different chemicals can produce toxic gases which may cause death.
I dentification of Parts WATER SUPPLY HOSE Make sure the water does not leak. Handle Locker POWDER DETERGENT BOX FOR DELAYED WASHING / SOFTENER BOX POWER PLUG If the supply cord is damaged, it must b: e replaced by the manufacturer or its service agents or similarly qualified person in order to avoid a hazard. ver. ath. BLEACH DISPENSER ed FUNCTION SELECTOR TUB START/PAUSE BUTTON Use to start or stop the washing machine temporarily.
Introduction F unction Information Our machine provides various washing methods which suits various conditions and types of laundry. Different types of laundry washing FUZZY Wash Use this Program for mixed loads e.g. sheets, towels, T-shirts. (refer to page 16) JEANS Wash Use this Program for heavily soiled durable garments e.g. overalls, jeans. Thick and heavy clothes or those which are excessively dirty like jeans or working uniforms can be washed.
Before Starting to Wash P reparation Before Washing Care Labels * Look for a care label on your clothes. This will tell you about the fabric content of your garment and how it should be washed. Sort clothes into loads that can be washed with the same wash cycle, Water Temperature and spin speed. 16) Sorting To get the best results, different fabrics need to be washed in different ways. • SOIL (Heavy, Normal, Light) Separate clothes according to the type and amount of soil.
Before Starting to Wash 10 U se of Water, Dispenser Drawer, Detergent, Bleach and Softener Usin Using Water Amount of WATER LEVEL • This machine detects the quantity of laundry automatically, then sets the WATER LEVEL and proper amount of Detergent. • When you select a wash program, the WATER LEVEL and amount of Detergent (to be used) will be shown on the control panel. • The following table shows the amount of water.
Detergent Follow the Detergent package directions. Using too little Detergent is a common cause of laundry problems Use more Detergent if you have hard water, large loads, greasy or oily soils or lower Water Temperature. Choosing the right Detergent We recommend the use of front loader type, low sudsing high efficiency Detergent(powder,liquid or concentrated). Soap flakes or granulated soap powders should not be used in your washing machine.
Before Starting to Wash 12 U se of Water, Dispenser Drawer, Detergent, Bleach and Softener Using Liquid Bleach • Check clothing care label for special instructions and separate the laundry to be bleached • Dilute liquid chlorine bleach. • Measure the recommended amount of liquid bleach carefully following instructions on the bottle. • Before starting the washer, pour measured amount of bleach directly into bleach dispenser. Avoid splashing or overfilling.
WARNING Do not use or mix liquid chlorine bleach with other household chemicals such as toilet cleaners, rust removers, acid or products containing ammonia. These mixtures can produce dangerous fumes which can cause serious injury or death. To reduce the risk of fire or serious injury to persons or property, comply with the basic warnings listed below: • Read and comply with all instructions on stain removal products.
Before Starting to Wash 14 F unction of each Button WATER TEMPERATURE BUTTON (OPTION) • Use to select Water Temperature. Pressing the button allows you to select COLD WARM (HOT&COLD) HOT COLD respectively. WATER LEVEL BUTTON TIME LEFT, DELAY START (RESERVATION), ALARM INDICATION • Use to select the proper amount of water in relation to the weight and type of laundry. • Automatically controlled, but can be selected manually by pressing the WATER LEVEL Botton.
g time RT Y) an error ty. open. • It only operates in FUZZY Program. • While the sensor is detecting the washing conditions, the LED flashes green, orange and red in turn. And, after detecting, the LED lights a specific color according to the detected condition as follows: If the current washing condition (Detergent quantity, Water Temperature, water quality, etc.
Washing Programs W ashing Programs Washing Programs POWER AUTO OFF 1 Add the laundry Add the Detergent 2 4 START PAUSE This program is for mixed fabrics which would be considered a normal, or typical wash load. It automatically selects the most appropriate wash conditions such as wash action and cycle times by utilizing the built-in load sensor. • Add the appropriate quantity of Detergent as indicated by the WATER LEVEL next to WATER DETERGENT.
START PAUSE 3 ntity of y the ns • The pulsator rotates for 8 seconds to detect the laundry load. • Then the WATER LEVEL and the amount of Detergent to be used will be shown and water will be supplied. Close the lid 5 • Water Water level will then be topped up shorly. after the wash has started to supplement the water the laundry has absorbed. Finish Caution & Note 6 • When the wash program ends, the chime will sound for 10 seconds before the Power goes off automatically.
Washing Programs 18 S 1 OAK Wash Use this mode to wash normal clothes or thick and heavy clothes which are excessively dirty. SOAK mode can be used with the FUZZY or JEAN or SILENT or FAVORITE program. Press the POWER (AUTO OFF) button to turn power on. POWER AUTO OFF 2 Press the PROGRAM button to select the washing program. START PAUSE 3 Press the WASH button, to select SOAK program.
1 Pressing the FAVORITE button allows you to store your FAVORITE wash conditions in the normal cycle memory and then recall it for use at a later time. Press the POWER (AUTO OFF) button to turn power on. POWER AUTO OFF 2 Select the FAVORITE program. START PAUSE 3 4 Select your FAVORITE wash conditions. START PAUSE • Press the WATER TEMP. button to select wash Water Temperature. • Press the WATER LEVEL button to select WATER LEVEL.
Washing Programs 20 S 1 ILENT Wash Use this program to wash quietly in SILENT especially during late night and dawn. Press the POWER (AUTO OFF) button to turn power on. POWER AUTO OFF 2 Press the PROGRAM button to select SILENT program. START PAUSE 3 Add the laundry into the washing tub. START PAUSE 4 Press the START/PAUSE button. START PAUSE 5 Add the Detergent and close the lid. NOTE • SILENT program is longer in wash time than FUZZY program.
1 If scrud is allowed to build-up in the machine it can result in stains on your clothes or give an unpleasant smell in your washer. Scrud is the waxy build-up that can occur within any washer when the fabric softener comes into contact with Detergent in conjunction with excessive soap usage and cold water. The Tub Clean function can help prevent scrud build up. by cleansing the inner and outer bowl. Press the POWER (AUTO OFF) button to turn power on.
Additional Function Program 22 A 1 IR DRY AIR DRY can be used to further remove moisture after the wash cycle by subjecting the load to air currents within the machine. This function will not dry clothes completely and should only be used for loads under 2 kg. Press the POWER (AUTO OFF) button to turn power on. POWER AUTO OFF 2 When you press the Air dry button for 3 seconds, the Air dry course will be selected. • When the Air dry is selected, other buttons will be inactive.
1 When you only need the Wash, Wash/Rinse or Rinse cycles, these can be set manually. Press the POWER (AUTO OFF) button to turn power on. POWER AUTO OFF 2 n. START PAUSE Only Wash Press the WASH button to Press the RINSE button to select the desired START timing. select theSTART desired number START PAUSE PAUSE PAUSE of rinses. Only Wash,Rinse START PAUSE Press the WASH button to select the desired timing. START PAUSE Press the RINSE button to select the desired number of rinses.
Additional Function Program 24 D 1 ELAY START (RESERVATION) Wash DELAY START (RESERVATION) Wash is used to delay the finishing time of the operation. The hours to be delayed can be set by the user accordingly. The time on the display is the finishing time, not the start time. Press the POWER (AUTO OFF) button to turn power on. POWER AUTO OFF 2 Press the PROGRAM button to select the washing program. 3 Press the DELAY START (RESERVATION) button. • Select the program for laundry on the Control panel.
O Child Lock Function If you want to lock all the keys to prevent settings from being changed by a child, you can use the child lock option. How to Lock 1 Press the POWER (AUTO OFF) button. • Turn Power on. POWER AUTO OFF 2 Press the START/PAUSE button to start washing. • After all washing conditions are set according to the manual. START PAUSE . n 3 Press both the RINSE button and the SPIN button simultaneously.
Installation I nstallation Caution Improper installation of the washer may cause noise and malfunctioning. 1. The ventilation openings in the base area must not be ostructed by carpet when the washing machine is installed on a carpeted floor. 2. Install the washing machine on a solid, level surface. How to adjust level 1 Installation area 2 • Install the washer on a solid and level surface.
Installation 2 Checking level 3 Checking slope • Open the lid and check if the washer is correctly leveled by refering to the level indicator. • Check if installation surface is tilted. (Try to shake the washer and check if the washer is firmly installed.) 5 Confirming level between drain hose at the rear and 6 Distance the wall 2cm 63.
Installation I nstallation How to install the drain hose 1. Fit the machine end of the drain hose to the outlet of the drain pump and tighten the clamp. C 2. Put the other end of the drain hose over the standpipe or wash tub. 3. Fit the plastic holder into the holes located at either side of the rear of the machine. The holder will fit in either direction accordign to location of the standpipe.
C onnecting Water Supply Hose Connecting Water Supply Hose to water tap Normal Type 1 (Normal tap without thread & screw type inlet hose.) Untighten the screw Rubber packing Untighten the screw of the connector so that the tap can be placed in the middle. 2 screw Connector Fixing the connector to the tap Push the upper connector up till the rubber packing is in tight contact with the tap. Then tighten the 4 screws.
Installation C onnecting Water Supply Hose Normal Type 1 (Normal tap without thread & one touch type inlet hose.) 1 Separate Middle connector from Water Supply Hose Separate Middle connector from the Water Supply Hose by pulling the Pressing Rod and the Pressing Handle that is attached to the Water Supply Hose.
C onnecting Water Supply Hose Installation Screw Type 1 Attach the water supply hose to the tap. Push the water supply hose up so that the rubber packing within the hose can adhere completely to the tap. Water tap Rubber Packing Water Supply Hose 2 Connect the water supply hose to the tap. Connect the water supply hose to the tap and then tighten it by screwing it to the right. 3 Check water leakage. After connecting the hose at both ends, open the tap to check for any water leakage.
Care and Maintenance 32 G rounding Method Earth wire should be connected. If the earth wire is not connected, there is possible a danger of electric shock caused by the current leakage . Grounding Method with Ground insert space Terminal If the AC outlet has a ground terminal, then separate grounding is not required.
by leaning and Maintenance Cold water washing • If you always use COLD water, we recommend that a WARM or HOT wash be used at a regular intervals e.g. every 5th wash should be at least a WARM one. When you have finished • Turn off taps to prevent the chance of flooding should a hose burst. • Always unplug the power cord after use. When water supply into the tub is not clean or the filter is clogged with particles (such as sand), clean the filter in the inlet valve occasionally.
Care and Maintenance 34 C leaning and Maintenance Ho When there is a possibility of freezing ambient temperatures. • Close the water taps and remove the Water Supply Hose. • Remove the water which remains in the water supply. • Lower the drain hose flat against the ground and drain any remaining water left in the bowl the and drain hose. If frozen • Remove the water supply hose, and immerse it in HOT water at approx.. 40˚C. • Pour approx.. 2 liters of HOT water at approx..
se of Handle Locker How to use Handle Locker If you feel uncomfortable using the folding handle, you can use the fixed handle option. • Push both Locks towards the centre of the lid, this will free the handle. • To lock the handle in back place, push the locking slides towards the outside of the lid. refer to the below Picture. Lock ( ) o clean se. (Do Unlock ( ) chine"s or next . her will n the ht.
Troubleshooting C ommon washing problems Many washing problems involve poor soil & stain removal, residues of lint and scum, and fabric damage. For satisfactory washing results, follow these instructions. WASH PROBLEM Problems Possible Causes Solutions & Preventive Measures Poor soil removal • Not enough Detergent • Wash Water Temperature too low. • Overloading the washer • Incorrect wash cycle • Incorrect sorting • Stain not pre treated.
T roubleshooting Symptom Water Supply Failure Error Message Check List Is the water tap shut off? Is the water supply cut off? Is the tap or water supply hose frozen? Is the water pressure low or is the filter of the inlet valve clogged with impurities? Is the drain hose elevated above 90cm as per the installation instructions? Is the Hot hose connected to cold? Is the Cold hose connected to hot? If the Washing Machine is subjected to an unstable supply of water , " IE " is on the DISPLAY.
Specification S pecification H W Model Wash capacity D WT-H9556 WT-H8006 9.5kg 8.0kg 50kg Weight Size 632(W) Water tab pressure 50 - 600 kPa (0.5 - 6.0 kgf/cm2) 670(D) 1020(H) In our continuing effort to improve the quality of our appliances, it may be necessary to make changes to the appliance without revising this manual.
M emo
W y
