Instructions / Assembly

ManualsBrandsLG Electronics ManualsHeating, Ventilation, and Air Conditioning9,000 BTU Portable Air Conditioner (72 Pint/Day) and Remote Control

USING THE CONTROLS

H O W TO U S E

English

Control panel buttons shown. Operation using the remote control is the same, unless

specifically noted.

1. COOLING MODE

· Press MODE button to choose Cool

mode, the Cool mode indicator will flash.

Press UP or DOWN button to set room

temperature between 18 to 30ćć .

Press SPEED button (or High/Low button)

to select high, low fan speed.

2. AUTOMATIC ADJUSTING MODE

· Press POWER to enter the automatic

adjusting mode when the unit is running for

the first time. When room temperature is

higher than25ć, it will come into cool mode.

On the contrary, it will be fan mode. You can

select the fan speed mode and time mode

when it is under automatic adjusting mode.

3. FAN MODE

· Press MODE button (or Fan button) to

choose Fan mode, the Fan mode indicator

will flash.

Select the fan speed by press FAN button

or press High / Low button directly.

4. TIME MODE

· When the appliance is switch off, press

Timer button to set timer-on.

The temperature can not be set.

Press Up or Down button to adjust time

from 30 minutes to 24 hours. The Time

on indicator will flash.

When the appliance is running, press

Timer button to set timer-off.

Press Up or Down button to adjust time

from 30 minutes to 24 hours. The Time

off indicator will flash.

NOTE

噝

Always point the remote at the sensor. The remote may not work if the

sensor is in bright light or if there is not a clear path between the remote

and the sensor.

5. SLEEPING MODE

· Setting sleeping mode, the temperature

will rise 1ć after 2 hours, and another 2

hours later, rise 1ć

· Then it will keep steady and low fan blow.

6. CONINUOUS

· After setting mightiness, the unit will

keep running no matter what temperature

it sets, and E4ǃE1ǃE2ǃ E3 protection

works.

High fan blows.