Use and Care Manual

18
Foam seal A
(Adhesive type)
Foam seal C
(Adhesive
type-shorter)
1
Cut the foam seal A (adhesive type) &
C (adhesive type-shorter) to the proper
length, and attach it to the window sash and
frame.
2
Insert the vent panel assembly, including
extension panels, if needed, into the window
opening. Extend the extension panels, if
used.
Foam seal B
(Non-adhesive type)
4
Cut the foam seal B (Non-adhesive type) to
the window height. Stuff the foam seal B
between the glass and the window to
prevent air and insects from getting into the
room.
3
Vent
Panel
Type A screws
Carefully close the window. Secure the vent
panel in place with 4 type A screws, plus
one screw for each extension.
Vent panel only: 4 type A screws
Vent panel and
one extension: 5 type A screws
Vent panel and
two extensions: 6 type A screws
Two vent panels and
two extensions: 10 type A screws
INSTALLATION IN CASEMENT STYLE WINDOWS
NOTE: The window installation kit can be used with casement windows between 18
″
and 48
″
tall.
INSTALLATION INST RU C TIONS
Extension panel
(if required)
Joints en
Mousse C
(plus court de
type adhésif)
Sellado con
espuma A
(tipo adhesivo)
Sellado con
espuma C
(tipo adhesivo-
más corto)
Sellado con espuma B
(tipo adhesivo)