Use and Care Manual

21
CARE AND CLEANI N G
EMPTYING THE WATER COLLECTION TANK
Drain
Cap
Drain Outlet
When the internal water collection tank is full, FL
will appear in the display and the air conditioner
will turn off until the tank is emptied.
Unplug the air conditioner, disconnect
the exhaust hose from the back, and move
the air conditioner to a suitable drain
location or outdoors. You may also place
a pan under the drain that will hold up
to 3 pints of water.
Remove the drain cap and the rubber plug
from the drain outlet.
Once the water collection tank is drained,
reinstall the rubber plug a
nd the
drain cap,
making sure it is
on securely.
Place the air conditioner in the desired
location, reconnect the exhaust hose, and
plug in the air conditioner.
During the dehumidifiying mode remove the drain plug and the exhaust from the back of the unit.
NOTES:
When turned on after being unplugged, the air conditioner will automatically reset to
COOL mode, with a temperature setting of 72°F.
1
2
3
4
Using the bottom drain port
5
6
Install a drain hose (18mm [11/16"] inside diameter) and place the open end of the hose a suitable
drain location or outdoors.
7
Note: If the water full alarm is often on, there may
be some malfunction about the unit.
Contact the professional service for help.
FL apperars in the display
The water collection tank is full, drain the tank and restart the air conditioner.
NOTICE
the DRY mode, remove the drain plug and the exhaust
hose from the back of the unit.
Drain Cap
Drain Oulet
English
When need dehumidification in high humidity ,During
English