Use and Care Manual
1
3
6
5
POWER ON/OFF
Turns the air conditioner on and off. When turning on,
a rising tone will sound to confirm. When turning off,
a descending tone will sound.
FAN
Adjusts the circulation fan speed among low (F1),
medium (F2), and high (F3) .
A PART
shows the set temperature (°C or °F),
fan speed, or the selected TIMER delay.
B PART shows the active mode (COOL, FAN, DRY
ENERGY SAVER and HEAT), Auto clean, Water full.
/ (TEMP/TIMER)
Use these buttons to adjust the set temperature up or
down, or to adjust the timer delay time.
Operation of functions is the same when using the remote or the
control panel, unless otherwise stated.
For detailed instructions on each function, see the following pages.
9
AUTO SWING
Sets the motorized air discharge to oscillate,
improving air circulation in the room. This function can
be activated from the remote only.
LCD DISPLAY
CONTROL PANEL AND REMOTE
PAR T S AND FEAT U RES
7
2
MODE
Switches the air conditioner between COOL, FAN, DRY,
ENERGY SAVER and HEAT modes. The
active
mode will be shown in the LCD display.
4
TIMER
Allows you to set a delay from 1 to 24 hours that will
turn the air conditioner on or off automatically.
7
Use this button,the temperature display can be switched
between degrees Celsius (°C) and degrees Fahrenheit
(°F) . This function can be activated from the remote
only.
8
AUTO CLEAN
The AUTO CLEAN function is used to remove moisture
from the heat exchangers and helps prevent odor from
forming. This function can be activated from the remote
only.
°C/°F
English
B PART
A PART
6
1
3
2
5
4
5
6
Heat
6
1
2
9
8
5
3
Heat
7
4
7
4