User manual

PORTABLE MP3/CD CASSETTE RECORDER ] OWNER’S MANUAL
5
Listen to cassette tapes
1. Select the TAPE function
2. Open the tape door
3. Insert the tape
4. Close the tape door
5. Start the tape playing
6. To stop a tape playing
Cassette deck will automatically stop at
the end of the tape
FUNCTION SWITCH
x/Z
b
x
/Z
Listen to cassette tapes - more you can do
To Play Fast backward or Forward
After pressing bb/BB during playback, or stop, press b at a point you
want.
Recording
Note:
On recording, press
[]
(PAUSE) to pause.
1. Open the tape door
2. Insert a blank tape
3. Close the tape door
4. Select a mode (FM, AM or CD) in which
you want to record
- For CD, press
BB
/
[]
(PLAY/PAUSE)
5. Start the Recording
6. To stop a Recording
x/Z
FUNCTION SWITCH
z
x/Z
1. Open the tape door
2. Insert a blank tape
3. Select the CD function
4. Start the Recording
The synchronized recording is started
automatically after about 7 seconds
5. To stop a Recording
x/Z
FUNCTION SWITCH
z
x/Z
Record from a CD or radio to cassette
CD Synchronized Recording
ON RECORDER
ON RECORDER
ON RECORDER
About MP3
MP3 Disc compatibility with this unit is limited as follows:
1. Sampling Frequency : 8 - 48 kHz
2. Bit rate : 8 - 320 kbps
3. CD-R physical format should be “ISO 9660”
4. If you record MP3 files using the software which cannot create a FILE
SYSTEM, for example “Direct-CD” etc., it is impossible to playback
MP3 files. We recommend that you use “Easy-CD Creator”, which
creates an ISO 9660 file system.
5. Do not use special letters such as “/ : * ? “ < >”etc.
6. Even if the total number of files on the disc has more than 512, it will
only be shown up to 511.