Warranty

ENGLISH
19
USING THE COOKTOP
USING THE COOKTOP
COOKING AREAS
The cooking areas on your range are identied by
permanent circles on the glass cooktop surface. For the
most ecient cooking, t the pan size to the element
size.
Pans should not extend more than 1/2 to 1-inch be-
yond the cooking area.
When a control is turned on, a glow can be seen through
the glass cooktop surface. The element will cycle on
and o to maintain the preset heat setting, even on
Hi.
Hot surface indicator
HS (Hot Surface) will appear in the display once the
element is turned o or during the self clean cycle. The
HS indicator will stay on until the surface has cooled to
approximately 150°F (66°C) or when the self clean cycle
ends.
It is normal for the surface elements to cycle on and
o during cooking, even on higher settings. This will
happen more frequently if cooking on a lower tem-
perature setting.
CAUTION
Using the cooktop elements
To turn on a SINGLE element
1. Press the ON/OFF button that controls the element
that you would like to use.
2. Press the
+ button once to adjust the element tem-
perature to Hi, or the
– button once to adjust the
element temperature to Lo.
3. Use the
– / + buttons to adjust the element tem-
perature settings. The element temperature settings
are adjustable at all times.
4. To turn o the element after cooking, press the ON/
OFF button once.
• Hi is the highest temperature available.
• Lo is the lowest temperature available.
• Press and hold the
+
or
–
buttons to quickly scroll
through the temperature settings.
NOTE
For Model: LRE3027, LRE3085
For Model: LRE3083
For Model: LRE3021
SINGLE
WARM
ZONE
SINGLE
DUAL
DUAL
SINGLE
WARM
ZONE
SINGLE
DUAL
SINGLE
SINGLE
SINGLE
DUAL
SINGLE
SINGLE