ENGLISH Español OWNER’S MANUAL ELECTRIC RANGE Read this owner’s manual thoroughly before operating the appliance and keep it handy for reference at all times. LRE3194** www.lg.com MFL57206016 (REV.01 180710) Copyright © 2018 LG Electronics Inc. All Rights Reserved.
TABLE OF CONTENTS TABLE OF CONTENTS 3 IMPORTANT SAFETY 28 INSTRUCTIONS 9 PRODUCT OVERVIEW 9 9 Parts Accessories 10 INSTALLATION 10 10 11 12 14 18 18 Installation Overview Product Specifications Before Installing the Range Installing the Range Connecting Electricity Engaging the Anti-tip Device Test Run 19 OPERATION 19 20 24 Control Panel Overview Changing Oven Settings 20 Clock -- Setting the Hour Mode 20 Oven Light 20 Minimum & Maximum Default Settings 21 Timer On/Off 21 Settings -- Setting Co
IMPORTANT SAFETY INSTRUCTIONS 3 Read and follow all instructions when using the range to prevent the risk of fire, electric shock, personal injury, or damage. This guide does not cover all possible conditions that may occur. Always contact your service agent or manufacturer about problems that you do not understand. Download this owner's manual at: http://www.lg.com This is the safety alert symbol.
IMPORTANT SAFETY INSTRUCTIONS SAFETY PRECAUTIONS •• DO NOT TOUCH HEATING ELEMENTS OR INTERIOR SURFACES OF OVEN. Heating elements may be hot even though they are dark in color. Interior surfaces of an oven become hot enough to cause burns. During and after use, do not touch or let clothing or other flammable materials contact heating elements or interior surfaces of oven until they have had sufficient time to cool.
IMPORTANT SAFETY INSTRUCTIONS 5 Warning Be certain that all packing materials are removed from the appliance before operating. Keep plastic, clothes, paper, and other flammable materials away from parts of the appliance that may become hot. •• Do not store or use flammable material in the oven or near or on the cooktop. Flammable materials include paper, plastic, pot holders, linens, wall coverings, curtains, and gasoline or other flammable vapors and liquids such as grease or cooking oil.
IMPORTANT SAFETY INSTRUCTIONS CHILD SAFETY •• Do not touch the hot surface between the bottom of the oven door and the top of the drawer on the front of the oven while the oven is in operation. The surface becomes hot and can cause burns and other injury. •• Do not leave small children unattended near the oven. Warning Do not leave children alone or unsupervised near the appliance when it is in use or is still hot.
IMPORTANT SAFETY INSTRUCTIONS 7 ENERGY SAVING TIPS •• Multiple-rack cooking saves time and energy. Whenever possible, cook foods requiring the same cooking temperature together in one oven. •• For optimal performance and energy savings, follow the guides on page 30 for proper rack and pan placements. •• Match the size of the cookware to the amount of food being cooked to save energy when heating. Heating ½ quart of water requires more energy in a 3-quart pot than in a 1-quart pot.
IMPORTANT SAFETY INSTRUCTIONS •• Pull the oven rack to the stop-lock position when loading and unloading food from the oven. This helps prevent burns caused by touching hot surfaces of the door and oven walls. •• Do not use the oven if a heating element develops a glowing spot during use or shows other signs of damage. A glowing spot indicates the heating element may fail and present a potential burn, fire, or shock hazard.
PRODUCT OVERVIEW ENGLISH PRODUCT OVERVIEW Parts Controller Cooktop Glass-ceramic Gasket Rack Oven door Warming drawer / Storage drawer 9 Model & serial number plate Accessories Included Accessories Standard Rack (2ea) NOTE •• Contact LG Customer Service at 1-800-243-0000 (1-888-542-2623 in Canada) if any accessories are missing. •• For your safety and for extended product life, only use authorized components.
INSTALLATION INSTALLATION Installation Overview Please read the following installation instructions first after purchasing this product or transporting it to another location.
INSTALLATION 11 If you did not receive an anti-tip bracket with your purchase, call 1-800-243-0000 (1-888-542-2623 in CANADA) to receive one at no cost. Warning Warning Tip - Over Hazard •• The information in this manual should be followed exactly. Failure to do so may result in fire, electrical shock, property damage, personal injury, or death. A child or adult can tip the range and be killed. Verify the anti-tip bracket has been installed.
INSTALLATION Installing the Range Unpacking and Moving the Range CAUTION •• You should use two or more people to move and install the range. (Excessive Weight Hazard) Failure to do so can result in back or other injury. •• Do not use the door handles to push or pull the range during installation or when moving the range out for cleaning or service. Doing so can result in serious damage to the door of the range. Remove packing material, tape and any temporary labels from your range before using.
INSTALLATION 13 ENGLISH Dimensions and Clearances NOTE Save for the use of the local electrical inspector. 3" (7.6 cm) 24" (60.9 cm) Acceptable electrical outlet area 3" (7.6 cm) 25" (63.5 cm) Normal counter top depth Counter 36" (91.4 cm) top height Cabinet opening 24" (60.9 cm) 36" (91.4 cm) 29.8" (75.7 cm) A = 30" (76.2 cm) For U.S.A = 30" (76.2 cm) ~ 31" (78.
INSTALLATION Installing the Anti-tip Device Use a level to check your adjustments. Place the level diagonally on the oven rack, and check each direction for level. Warning Tip - Over Hazard First check direction . A child or adult can tip the range and be killed. Verify the anti-tip bracket has been installed. Ensure the anti-tip bracket is engaged when the range is moved. Do not operate the range without the anti-tip bracket in place.
INSTALLATION 15 •• Allow 2 to 3 ft (61.0 cm to 91.4 cm) of slack in the line so that the range can be moved if servicing is ever necessary. •• The power supply cord and plug should not be modified. If it will not fit the outlet, have a proper outlet Installed by a qualified electrician. Use the cord/conduit connection plate to install the power cord or conduit. Leave the connection plate as installed for power cord installations.
INSTALLATION 3-Wire Connection : Power Cord 4-Wire Connection : Power Cord Warning Warning •• The middle (neutral or ground) wire, which is white, of a 3-wire power cord or a 3-wire conduit has to be connected to the middle post of the main terminal block. The remaining two wires of the power cord or conduit have to be connected to the outside posts of the main terminal connection block. Failure to do so can result in electrical shock, severe personal injury or death.
INSTALLATION 17 4-Wire Connection: Conduit Install the conduit as follows: Remove the conduit connection plate from the rear of the oven and rotate it. The conduit hole (11/8") must be used. First, prepare the conduit wires as shown below. 3-Wire Conduit connection plate 4-Wire or Ground wire Second, install the conduit strain relief. For conduit installations, purchase a strain relief and insert it in the 11/8 in. (2.8 cm) conduit hole.
INSTALLATION Engaging the Anti-tip Device Test Run •• Move the range close enough to the opening to plug into the receptacle. Check if the range is properly installed and run a test cycle. •• Slide the range into position ensuring that the back leg slides under the anti-tip bracket. The range should sit flush against the back wall when properly installed. 1 Press Clear/Off to start test. 2 Turn on each burner to the Hi setting to check that the surface heating elements are working properly.
OPERATION 19 ENGLISH OPERATION Control Panel Overview 1 2 3 6 7 1 Features 5 Clear Off / Lockout Key 2 Oven Control 6 Smart DiagnosisTM (on some models) 3 Number Keys 7 Cooktop Control 4 5 4 Start Key Hot Surface Indicator The HS(hot surface) indicator appears in the display as long as any surface cooking area is too hot to touch. It remains on after the element is turned off and until the surface has cooled to approximately 150 ˚F. Also, The HS indicator appears during the self clean cycle.
OPERATION Changing Oven Settings Clock The clock must be set to the correct time of day in order for the automatic oven timing functions to work properly. 1 Press Clock. 2 Press the numbers to enter the time. For example, to set the clock for 10:30, press the numbers: 1, 0, 3 and 0. 3 Minimum & Maximum Default Settings All of the features listed have a minimum and a maximum time or temperature setting that may be entered into the control.
OPERATION 21 Settings The Timer On/Off serves as an extra timer in the kitchen that beeps when the set time has run out. It does not start or stop cooking. Press the Settings key repeatedly to toggle through and change oven settings. The Timer On/Off feature can be used during any of the other oven control functions. •• enable/disable convection auto conversion Setting the Timer (for example to set 5 minutes) 1 Press Timer On/Off once. 0:00 appears and Timer flashes in the display. 2 Press 5.
OPERATION 1 Press Settings repeatedly until AdJU appears in the display. 2 Use the number keys to enter the number of degrees you want to adjust the oven temperature. 3 Adjust the temperature either up or down by pressing Settings repeatedly to toggle between plus (+) or minus (-). 4 Press Start. NOTE Adjusting the Beeper Volume 1 Press Settings repeatedly until BEEP appears in the display. 2 Press 1 for NORMAL or press 2 for MUTE. 3 Press START to accept the change.
OPERATION 23 Cook Time (Timed Cook) The automatic timer of the Delayed Timed Cook function turns the oven on and off at the time you select. This feature can be used with the Bake, Conv. Bake and Conv. Roast modes. Set the oven to cook for a specific length of time using the Timed Cook feature. This feature can only be used with the Bake, Conv. Bake and Conv. Roast modes.
OPERATION Using the Cooktop CAUTION Cooking Areas The cooking areas on your range are identified by permanent circles on the glass cooktop surface. For the most efficient cooking, fit the pan size to the element size. Pans should not extend more than 1/2 to 1-inch beyond the cooking area. When a control is turned on, a glow can be seen through the glass cooktop surface. The element cycles on and off to maintain the preset heat setting, even on Hi.
OPERATION 25 Turning on the Triple Element Adjust the dual element according to the pot/pan size being used. Adjust the triple element according to the pot/pan size being used. Inner element Outer element Single element Dual element Triple element A B A B C 1 Press the ON/OFF button that controls the desired surface element. 1 Press the ON/OFF button that controls the desired surface element. 2 Press the SELECT button to select either the inner (smaller) or outer (larger) element function.
OPERATION Turning on the Warming Zone Use the Warming Zone to keep food warm after it has already been cooked. The warming zone is not meant for cooking food. Attempting to cook uncooked or cold food on the warming zone could result in a foodborne illness. 1 2 Press the warming zone ON/OFF button. The warming zone indicator light flashes. Press the + button once to adjust the temperature to Hi, or the – button once to adjust the temperature to Lo.
OPERATION 27 Choosing Cookware The size and type of cookware will influence the settings needed for the best cooking results. Be sure to follow the recommendations for using proper cookware. The cookware material determines how evenly and quickly heat is transferred from the surface element to the pan bottom. The most popular materials available are: Cookware should have flat bottoms that make good contact with the entire surface heating element.
OPERATION Using the Oven Replacing Racks Before Using the Oven NOTE •• Because the oven temperature cycles, an oven thermometer placed in the oven cavity may not show the same temperature that is set on the oven. •• It is normal for the convection fan to run while preheating during a regular bake cycle. •• The convection fan motor may run periodically during a regular bake cycle. •• The fan turns off if the door is left open during baking. The fan turns back on automatically once the door is closed.
OPERATION 29 Tips for Convection Baking •• Baking time and temperature will vary depending on the characteristics, size, and shape of the baking pan used. •• Use Convection Bake for faster and more even multiple-rack cooking of pastries, cookies, muffins, biscuits, and breads of all kinds. •• Check for food doneness at the minimum recipe time. •• Bake cookies and biscuits on pans with no sides or very low sides to allow heated air to circulate around the food.
OPERATION Recommended Baking and Roasting Guide Baking results will be better if baking pans are centered in the oven as much as possible. If cooking on multiple racks, place the oven racks in the positions shown.
OPERATION 31 Smoking The Broil function uses intense heat from the upper heating element to cook food. Broiling works best for tender cuts of meat, fish, and thinly cut vegetables. Some models may feature a hybrid broiler consisting of an inner broiler that utilizes a carbon heating element which provides instantaneous heat, and a traditional outer broiling element. During normal broiler operation, it is normal for either element to cycle off intermittently.
OPERATION Recommended Broiling Guide The size, weight, thickness, starting temperature, and your preference of doneness will affect broiling times. This guide is based on meats at refrigerator temperature. For best results when broiling, use a pan designed for broiling. Food Ground Beef Quantity and/or Thickness Rack First Side Position (minutes) Second Side (minutes) Comments 1 lb. (4 patties) 1/2 to 3/4" thick 7 4-6 2-4 Beef Steaks Rare Medium Well done 1" thick 1 to 11/2 lbs.
OPERATION 33 Setting the Warm Function after a Timed Cook Beef 1 Select the cooking function. 2 Enter the oven temperature using the number keys. 3 Press Cook Time and enter the cook time using the number keys. 4 Press Warm. 5 Press Start. 6 When cooking is finished, press Clear/Off to cancel the Warm function. •• Steaks and chops should always be allowed to rest for five minutes before being cut into and eaten.
OPERATION Sabbath Mode Sabbath mode is typically used on the Jewish Sabbath and Holidays. When the SABBATH mode is activated, the oven does not turn off until the SABBATH mode is deactivated. In SABBATH mode, all function buttons, except for the CLEAR/OFF is inactive. Sb will appear in both the cooktop and oven displays. NOTE •• If the oven light is turned ON and the SABBATH mode is active, the oven light will remain ON until the SABBATH mode is turned OFF.
MAINTENANCE 35 Cleaning the Glass-Ceramic Cooktop Burned-On Residue 1 CAUTION While the cooktop is still hot, remove any burnt on deposits or spilled food from the glass-ceramic cooking surface with a suitable metal razor scraper. (Similar to scraping paint off of a windowpane, it will not damage the decorated cooking surface.) Hold the scraper at an approximate 30° angle to the cooktop. •• Do not use scrub pads or abrasive cleaning pads. They may damage your cooktop surface.
MAINTENANCE Metal Marks and Scratches 1 Be careful not to slide pots and pans across the cooktop. Doing so will leave metal markings on the cooktop surface. To help remove these marks, use a ceramic cooktop cleaner with a cleaning pad for ceramic cooktops. 2 If pots with a thin overlay of aluminum or copper are allowed to boil dry, the overlay may leave black discoloration on the cooktop. This should be removed immediately before heating again or the discoloration may be permanent.
MAINTENANCE 37 Suggested Cleaning Method Example of Oven Soiling Soil Pattern Types of Soils Common Food Items That Can Soil Your Oven Small drops or spots Cheese or other ingredients Pizza Steaks, broiled EasyClean® Fish, broiled Light splatter Fat/grease Medium to heavy splatter Fat/grease Meat roasted at high temperatures Filling or sugar based soils Pies Cream or tomato sauce Casseroles Self Clean* Drops or spots Meat roasted at low temperatures * The Self Clean cycle can be used f
MAINTENANCE 5 Spray or pour the remaining water onto the bottom center of the oven cavity. The indentation on the oven bottom should be fully covered to submerge all soils. Add water if necessary. NOTE If cleaning multiple ovens, use an entire bottle of water to clean each oven. Do not spray water directly on the door. Doing so will result in water dripping to the floor. 6 Close the oven door. Press EasyClean®. Press Start. CAUTION •• Some surfaces may be hot after the EasyClean® cycle.
MAINTENANCE 39 The Self Clean cycle uses extremely hot temperatures to clean the oven cavity. While running the Self Clean cycle, you may notice smoking or an odor. This is normal; especially if the oven is heavily soiled. During the Self Clean cycle, the cooktop elements cannot be used. NOTE •• Remove oven racks and accessories before starting the Self Clean cycle. During Self Clean, the kitchen should be well ventilated to minimize the odors from cleaning.
MAINTENANCE Setting Self Clean with a Delayed Start 1 Remove all racks and accessories from the oven. 2 Press Self Clean. The oven defaults to the recommended four-hour self clean for a moderately soiled oven. Press twice for a five-hour self clean or three times for a three-hour self clean. 3 Press Start Time. 4 Use the number keys to enter the time of day you would like the Self Clean to start. 5 Press Start.
MAINTENANCE 41 Oven Door Painted and Decorative Trim •• Use soapy water to thoroughly clean the oven door. Rinse well. Do not immerse the door in water. For general cleaning, use a cloth with hot soapy water. For more difficult soils and built-up grease, apply a liquid detergent directly onto the soil. Leave it on for 30 to 60 minutes. Rinse with a damp cloth and dry. Do not use abrasive cleaners. •• You may use a glass cleaner on the outside glass of the oven door.
MAINTENANCE Broiler Pan and Grid •• Do not store a soiled broiler pan or grid anywhere in the range. •• Do not clean the broiler pan or grid in a self-cleaning mode. •• Remove the grid from the pan. Carefully pour out the grease from the pan into a proper container. •• Wash and rinse the broiler pan and grid in hot water with a soap-filled or plastic scouring pad. •• If food has burned on, sprinkle the grid with cleaner while hot and cover with wet paper towels or a dishcloth.
MAINTENANCE 43 1 2 Removing the Drawer Firmly grasp both sides of the door at the top. With the door at the same angle as the removal position, seat the indentation of the hinge arms into the bottom edge of the hinge slots. The notch in the hinge arms must be fully seated into the bottom edge of the slots. Hinge arm Bottom edge of slot CAUTION Disconnect the electrical power to the range at the main fuse or circuit breaker panel.
TROUBLESHOOTING TROUBLESHOOTING During convection cooking the fan stops when I open the door. Is that normal? FAQs Yes, this is normal. When the door is opened, the convection fan will stop until the door is closed. What types of cookware are recommended for use with the cooktop? •• The pans must have a flat bottom and straight sides. •• Only use heavy-gauge pans. •• The pan size must match the amount of food to be prepared and the size of the surface element. •• Use tight fitting lids.
TROUBLESHOOTING 45 Make sure that the range is not in Lockout mode. The will show in the display if Lockout is activated. lock To deactivate Lockout, press and hold Clear/Off for three seconds. The unlock melody sounds and Loc appears in the display until the controls are unlocked. My range is still dirty after running the EasyClean® cycle. What else should I do? The EasyClean® cycle only helps to loosen light soils in your oven range to assist in hand-cleaning of your oven.
TROUBLESHOOTING Before Calling for Service Before you call for service, review this list. It may save you time and expense. The list includes common occurrences that are not the result of defective workmanship or materials in this appliance. Symptoms Possible Causes / Solutions •• Poor installation. Place oven rack in center of oven. Place a level on the oven rack. Adjust leveling legs at base of range until the oven rack is level. Range is not level.
TROUBLESHOOTING 47 Possible Causes / Solutions •• Plug on range is not completely inserted in the electrical outlet. - Make sure electrical plug is plugged into a live, properly grounded outlet. •• A fuse in your home may be blown or the circuit breaker tripped. Oven will not work - Replace the fuse or reset the circuit breaker. •• Oven controls improperly set. - See the Using the Oven section. •• Oven too hot. - Allow the oven to cool to below locking temperature.
TROUBLESHOOTING Symptoms Possible Causes / Solutions •• Aluminum foil used on the broiling pan and grid has not been fitted properly and slit as recommended. Food does not broil properly - See the Using the Oven section. •• In some areas the power voltage may be low. - Preheat the broil element for 5-7 minutes. - See the Broiling Guide. Oven temperature too hot or too cold Scratches or abrasions on cooktop surface •• Oven sensor needs to be adjusted.
TROUBLESHOOTING 49 Excessive smoking during a Self Clean cycle. Possible Causes / Solutions •• Excessive soil. - Press the Clear/Off button. Open the windows to rid the room of smoke. Wait until the Self Clean mode is cancelled. Wipe up the excess soil and reset the clean. •• Oven is too hot. Oven door does not open after a Self Clean cycle. - Allow the oven to cool below locking temperature. •• Allow about one hour for the oven to cool after the completion of a Self Clean cycle.
Smart Diagnosis™ Function Smart Diagnosis™ Function Should you experience any problems with the appliance, it has the capability of transmitting data via your telephone to the LG Customer Information Center. Wi-Fi equipped models can also transmit data to a smartphone using the LG SmartThinQ application. Smart Diagnosis™ through the Customer Information Center •• For appliances with the or logo This method allows you to speak directly to our trained specialists.
LIMITED WARRANTY 51 ARBITRATION NOTICE: THIS LIMITED WARRANTY CONTAINS AN ARBITRATION PROVISION THAT REQUIRES YOU AND LG TO RESOLVE DISPUTES BY BINDING ARBITRATION INSTEAD OF IN COURT, UNLESS YOU CHOOSE TO OPT OUT. IN ARBITRATION, CLASS ACTIONS AND JURY TRIALS ARE NOT PERMITTED. PLEASE SEE THE SECTION TITLED “PROCEDURE FOR RESOLVING DISPUTES” BELOW.
LIMITED WARRANTY •• Increases in utility costs and additional utility expenses. •• Any noises associated with normal operation. •• Use of accessories, components, or consumable cleaning products that are not authorized by LG. •• Replacement of light bulbs, filters, or any consumable parts. •• When Product is used for other than normal and proper household use (e.g. commercial or industrial use, offices, and recreational facilities or vehicles) or contrary to the Product’s owner’s manual.
LIMITED WARRANTY 53 Cause Prevention •• Surface is not level 1. Range not leveled •• Oven is tipping 2. Anti-tip device not installed correctly Level both sides of range Approximately 0.65" (16.5 mm) •• Check with installer first Anti-tip bracket Screw must enter wood or concrete Wall plate Use carpenter’s level to check level. 2 1 The cost of repair or replacement under the above excluded circumstances shall be borne by the consumer.
LIMITED WARRANTY Arbitration Rules and Procedures. To begin arbitration of a claim, either you or LG must make a written demand for arbitration. The arbitration will be administered by the American Arbitration Association (“AAA”) and will be conducted before a single arbitrator under the AAA’s Consumer Arbitration Rules that are in effect at the time the arbitration is initiated (referred to as the “AAA Rules”) and under the procedures set forth in this section. The AAA Rules are available online at www.
Español MANUAL DEL USUARIO ESTUFA ELÉCTRICA Lea atentamente este manual del usuario antes de poner el electrodoméstico en funcionamiento y téngalo a mano en todo momento para su referencia. LRE3194** www.lg.com MFL57206016 Copyright © 2018 LG Electronics Inc. Todos los Derechos Reservados.
2 ÍNDICE ÍNDICE 3 INSTRUCCIONES IMPORTANTES 24 DE SEGURIDAD 9 DESCRIPCIÓN GENERAL DEL PRODUCTO 9 9 Piezas Accesorios 10 INSTALACIÓN 10 10 11 12 14 18 18 28 Descripción general de la instalación Especificaciones del producto Antes de instalar la estufa Instalación de la estufa Conexión de la electricidad Colocación del dispositivo antivuelco Prueba de funcionamiento 19 FUNCIONAMIENTO 19 20 Descripción general del panel de control Cambio de las configuraciones del horno 20 Clock (Reloj) -- Configu
INSTRUCCIONES IMPORTANTES DE SEGURIDAD 3 INSTRUCCIONES IMPORTANTES DE SEGURIDAD Descargue este manual del propietario en: http://www.lg.com Este es el símbolo de alerta de seguridad. Este símbolo le advierte sobre posibles riesgos que pueden ocasionar daños materiales, lesiones personales graves o la muerte. El símbolo de alerta de seguridad siempre estará acompañado de las palabras "ADVERTENCIA" o "PRECAUCIÓN".
4 INSTRUCCIONES IMPORTANTES DE SEGURIDAD PRECAUCIONES DE SEGURIDAD •• NO TOQUE LAS HORNALLAS NI LAS SUPERFICIES INTERIORES DEL HORNO. Las hornallas podrían estar calientes incluso cuando presenten un color oscuro. Las superficies interiores del horno se calientan lo suficiente como para causar quemaduras.
INSTRUCCIONES IMPORTANTES DE SEGURIDAD 5 MATERIALES INFLAMABLES Advertencia •• No almacene ni utilice material inflamable en el horno ni cerca de la placa de cocción. Los materiales inflamables incluyen papel, plástico, agarraderas, telas, recubrimientos para paredes, cortinas y gasolina u otros vapores inflamables y líquidos como grasa o aceite de cocina. Estos materiales pueden prenderse fuego cuando el horno y la placa de cocción están en uso. •• Use vestimenta adecuada.
6 INSTRUCCIONES IMPORTANTES DE SEGURIDAD SEGURIDAD DE LOS NIÑOS •• No toque la superficie caliente entre la parte inferior de la puerta del horno y la parte superior del cajón, en el frente del horno, mientras está en funcionamiento. La superficie se calienta y puede causar quemaduras y otras lesiones. •• No deje a los niños sin supervisión cerca del horno. Advertencia No deje solos a los niños o sin supervisión cerca del electrodoméstico cuando está en funcionamiento o aún caliente.
INSTRUCCIONES IMPORTANTES DE SEGURIDAD 7 SUGERENCIAS PARA AHORRAR ENERGÍA •• Cocinar en varios estantes ahorra tiempo y energía. Siempre que sea posible, cocine alimentos que requieran la misma temperatura de cocción en un único horno. •• Para un desempeño óptimo y ahorro de energía, siga las pautas de la página 30 para colocar correctamente los estantes y las bandejas.
8 INSTRUCCIONES IMPORTANTES DE SEGURIDAD •• No utilice agua para apagar incendios provocados por grasa. Si se produce un incendio en el horno, mantenga la puerta del horno cerrada y apague el horno. Si el fuego continúa, arroje bicarbonato de sodio sobre el fuego o utilice un extinguidor. No arroje agua ni harina sobre el fuego. La harina podría ser explosiva y el agua podría hacer que un incendio causado por grasa se propague y genere lesiones personales.
DESCRIPCIÓN GENERAL DEL PRODUCTO 9 DESCRIPCIÓN GENERAL DEL PRODUCTO Piezas Placa de cocción Vitrocerámica Junta Estante Puerta del horno Cajón de calentamiento / Cajón de almacenamiento Placa de modelo y número de serie Accesorios Accesorios incluidos Estante estándar (2 c/u) NOTA •• Comuníquese con el Servicio de atención al cliente de LG al 1-800-243-0000 (1-888-542-2623 en Canadá) si falta algún accesorio.
10 INSTALACIÓN INSTALACIÓN Descripción general de la instalación Lea las siguientes instrucciones de instalación en primer lugar, después de comprar este producto o transportarlo a otra ubicación.
INSTALACIÓN 11 Antes de instalar la estufa Advertencia Si no recibió un soporte antivuelco con su compra, llame al 1-800-243-0000 (1-888-542-2623 en Canadá) para recibir uno sin costo. Advertencia Riesgo de vuelco Para verificar que se haya insertado la pata de nivelación en el soporte antivuelco, sujete el borde superior trasero de la estufa e intente inclinarla, con Soporte antivuelco cuidado. •• Debe seguir con exactitud la información de este manual.
12 INSTALACIÓN Instalación de la estufa Desembalaje y traslado de la estufa PRECAUCIÓN •• Debe haber dos o más personas para mover e instalar la estufa (Peligro de peso excesivo). De no hacerlo, podría sufrir lesiones en la espalda o de otra clase. •• No utilice la manija de la puerta para empujar ni para tirar de la estufa durante la instalación o al mover la estufa para tareas de limpieza o reparaciones. Hacerlo podría causar daños graves a la puerta de la estufa.
INSTALACIÓN 13 Dimensiones y espacios libres NOTA Guarde para el uso del inspector eléctrico local. 24" (60,9 cm) Área aceptable para tomacorrientes 3" (7,6 cm) 25" Ancho normal de (63,5 cm) la encimera Altura de la 36" (91,4 cm) encimera Hueco en el gabinete 24" (60,9 cm) 36" (91,4 cm) 29,8" (75,7 cm) A = 30" (76,2 cm) para EE. UU.
14 INSTALACIÓN Instalación del dispositivo antivuelco Advertencia Primero verifique la dirección Riesgo de vuelco Es posible que un niño o un adulto inclinen la estufa y el vuelco consecuente les produzca la muerte. Verifique que se haya instalado el soporte antivuelco. Asegúrese de que el soporte antivuelco esté conectado cuando se mueva la estufa. No ponga en funcionamiento la estufa sin el soporte antivuelco colocado.
INSTALACIÓN 15 Advertencia •• Deje de 2 a 3 pies (61,0 cm a 91,4 cm) de lugar libre en la línea, para que se pueda mover la estufa si es necesario hacer reparaciones. •• Se prohíbe utilizar un cable de extensión para conectar la estufa a la energía eléctrica. Conecte el cable de alimentación y el enchufe directamente. •• Se requiere una conexión eléctrica a tierra en este electrodoméstico. •• Asegúrese de que el cable de alimentación no esté presionado por la estufa ni por objetos pesados.
16 INSTALACIÓN Conexión con cable de 3 hilos: Cable de alimentación Conexión con cable de 4 hilos: Cable de alimentación Advertencia Advertencia •• El hilo del medio (neutro o tierra), que es blanco, de un cable de alimentación de 3 hilos o un conducto de 3 hilos se debe conectar al poste medio del bloque de terminales. Los dos hilos restantes del cable de alimentación o del conducto se deben conectar a los postes exteriores del bloque de terminales.
INSTALACIÓN 17 Conexión con cable de 3 hilos: Conducto Conexión con cable de 4 hilos: Conducto Instale el conducto de la siguiente manera: En primer lugar, prepare los hilos del conducto como se indica a continuación. 3 hilos 1" (2,5 cm) Placa de conexión del conducto 4 hilos 31/2" (8,9 cm) 1" 3/8" (2,5 cm) (0,9 cm) 3/8" (0,9 cm) 31/2" (8,9 cm) 3/4" (1,9 cm) o Cable de conexión a tierra 23/4" (6,9 cm) En segundo lugar, instale el pasacables del conducto.
18 INSTALACIÓN Colocación del dispositivo antivuelco •• Mueva la terminales para que quede cerca de la abertura para enchufar en el receptáculo. •• Deslice la estufa en posición y asegúrese de que la pata trasera se deslice por debajo del soporte antivuelco. La estufa debe quedar bien apoyada contra la pared trasera, cuando está bien instalada. •• Con cuidado, intente inclinar la estufa hacia delante, para asegurarse de que el soporte antivuelco esté colocado correctamente.
FUNCIONAMIENTO 19 FUNCIONAMIENTO Descripción general del panel de control 7 2 3 6 1 Funciones 5 Tecla Borrar apagado / Bloqueo 2 Control del horno 6 Smart DiagnosisTM (en algunos modelos) 3 Teclas numéricas 7 Hornallas de la placa de cocción 4 5 4 Tecla de inicio Indicador de superficie caliente El indicador de HS (superficie caliente) permanecerá encendido en el tablero mientras cualquier área de la superficie de cocción se encuentre demasiado caliente para tocarla.
20 FUNCIONAMIENTO Cambio de las configuraciones del horno Clock (Reloj) El reloj se debe configurar en la hora correcta del día para que las funciones automáticas del temporizador del horno funcionen de manera adecuada. 1 Presione Clock. 2 Presione los números para ingresar la hora. Por ejemplo, para configurar el reloj a las 10:30, presione los números: 1, 0, 3 y 0. 3 Presione Start.
FUNCIONAMIENTO 21 Timer On/Off (Temporizador encendido/apagado) La función Temporizador encendido/apagado se puede utilizar durante cualquiera de las funciones de control del horno. Configuración de la Temporizador (por ejemplo para 5 minutos) 1 Presione Timer On/Off una vez. Aparece 00:00 y el Timer parpadea en la pantalla. 2 Presione 5. En la pantalla, aparece 0:05. 3 Presione Timer On/Off para iniciar el temporizador. La cuenta regresiva del tiempo restante aparece en pantalla.
22 FUNCIONAMIENTO 1 Presione Settings varias veces hasta que AdJU aparezcan en la pantalla. 2 Use las teclas numéricas para ingresar el número de grados a los que desea ajustar la temperatura del horno. 3 Ajuste la temperatura hacia arriba o hacia abajo al presionar Settings varias veces para cambiar entre (+) más o menos (-). 4 Presione Start para aceptar el cambio. NOTA •• Este ajuste no afecta a las temperaturas de asar o Autolimpieza (en algunos modelos).
FUNCIONAMIENTO 23 Configuración de la Cocción temporizada retardada Por ejemplo, para hornear a 300 °F y retardar el inicio del proceso de horneado hasta las 4:30, primero debe configurar el reloj para la hora correcta del día. Presione Bake. 350 °F aparece en la pantalla. 2 Configure la temperatura: presione 3, 0 y 0. 3 Presione Cook Time y configure el tiempo de horneado. 4 Presione Start Time. 5 Configure la hora de inicio: presione 4, 3 y 0 para 4:30. 6 Presione Start.
24 FUNCIONAMIENTO Uso de la placa de cocción Áreas de cocción Las áreas de cocción de la estufa están identificadas por círculos permanentes en la superficie de vidrio de la placa de cocción. Para una cocción más eficiente, utilice el tamaño correcto de batería de cocina para el tamaño de cada hornalla. La batería de cocina no deben extenderse más de 1/2 a 1 pulgada del área de cocción. Cuando se enciende un control, se produce un brillo visible a través de la superficie de vidrio de la placa de cocción.
FUNCIONAMIENTO 25 Encendido de las dos hornallas. Encendido de las tres hornallas. Usted puede ajustar las hornallas duales de acuerdo al tamaño de la olla/sartén que está usando. Usted puede ajustar las hornallas triple de acuerdo al tamaño de la olla/sartén que está usando. Hornalla interior Elemento simple Elemento doble Elemento triple B A B C 1 Presione el botón ON/OFF que controla la hornalla que usted desea usar. 1 Presione el botón ON/OFF que controla la hornalla que usted desea usar.
26 FUNCIONAMIENTO Encendido de Warming Zone Use la Zona de Calentamiento para mantener la comida caliente luego de que ya haya sido cocinada. La zona de calentamiento no fue pensada para cocinar alimentos. Intentar cocinar alimentos sin cocinar o fríos en la zona de calentamiento puede provocar enfermedades transmitidas por los alimentos. 1 2 Presione el botón ON/OFF de la zona de calentamiento. La luz indicadora de la zona de calentamiento parpadeará.
FUNCIONAMIENTO 27 Uso de batería de cocina adecuada Elección de la batería de cocina El tamaño y tipo de batería de cocina influye en los ajustes necesarios para obtener resultados óptimos de cocción. Asegúrese de seguir las recomendaciones para utilizar la batería de cocina adecuada. El material de la batería de cocina determina la uniformidad y la rapidez en que se transfiere el calor de la hornalla al fondo del recipiente.
28 FUNCIONAMIENTO Uso del horno Colocación de los estantes Antes de usar el horno NOTA •• Como la temperatura del horno es cíclica, el termómetro que está dentro de la cavidad del horno podría no indicar la misma temperatura que está configurada. •• Es normal que el ventilador de convección funcione durante el precalentamiento en un ciclo normal de horneado. •• El motor del ventilador de convección podría funcionar periódicamente durante un ciclo normal de horneado.
FUNCIONAMIENTO 29 Sugerencias para hornear por convección •• El tiempo y la temperatura de horneado variarán según las características, el tamaño y la forma del recipiente que se utilice para hornear. •• Use el horneado por convección para cocinar más rápido y de manera más pareja en varios estantes: pasteles, galletas, muffins, bizcochos y panes de todo tipo. •• Verifique el punto de cocción de los alimentos en el tiempo mínimo de la receta.
30 FUNCIONAMIENTO Guía de recomendaciones para hornear y rostizar Los resultados del horneado serán mejores si las bandejas están centradas en el horno lo mejor posible. Si se cocina en varios estantes del horno, colóquelos en la posición que se ilustra.
FUNCIONAMIENTO 31 Broil (Asar) La función Asar usa calor intenso proveniente del elemento calentador superior para cocinar el alimento. Este método de cocción es ideal para cortes de carne tiernos, pescados y verduras finamente cortadas. PRECAUCIÓN •• No utilice una asadera sin rejilla. El aceite puede provocar un incendio causado por grasa. •• No cubra la rejilla ni la asadera con papel de aluminio. Si lo hace, se prenderá fuego. •• Siempre use una asadera con rejilla para drenar el exceso de grasa.
32 FUNCIONAMIENTO Guía de recomendaciones para asar El tamaño, peso, espesor, temperatura inicial y su preferencia de cocción afectarán el tiempo de asado. Esta guía se basa en carnes a temperatura de refrigerador. Para obtener mejores resultados al asar, use una bandeja especial para asar.
FUNCIONAMIENTO 33 Consejos para asar Filete •• Los bistecs y las chuletas siempre se deben dejar reposar durante cinco minutos antes de cortarlos y comerlos. Esto permite que el calor se distribuya uniformemente en el alimento y resulta más tierno y jugoso. •• En el caso de bistecs con hueso o chuletas cortadas a la francesa (se retira toda la carne alrededor del hueso), envuelva las partes expuestas del hueso en papel de aluminio para que no se quemen demasiado. 1 Seleccione la función de cocción.
34 FUNCIONAMIENTO Modo sabbath El modo Sabbath se usa principalmente en el Sabbath y las fiestas judías. Cuando se activa el modo Sabbath, el horno no se enciende hasta que se desactiva el modo Sabbath. En el modo Sabbath, todos los botones de función, salvo el botón CLEAR OFF están inactivos. Aparecerá Sb en las pantallas del horno y de la estufa. NOTA •• Si la luz del horno está encendida y el modo SABBATH está activo, la luz del horno permanecerá encendida hasta que se desactive el modo SABBATH.
MANTENIMIENTO 35 MANTENIMIENTO Limpieza de la placa de cocción de vitrocerámica Residuo quemado 1 •• Por su seguridad, póngase un guante para horno o una agarradera cuando use una espátula en la superficie de cocción caliente. Use limpiador para placas de cocción cerámicas en la superficie de vidrio. Otras cremas podrían no resultar eficaces o podrían rayar, dañar o manchar la superficie de la placa de cocción.
36 MANTENIMIENTO Rayas y marcas del metal 1 Tenga cuidado de no deslizar las ollas ni las sartenes por la placa de cocción. Si lo hace, el metal dejará marcas en la superficie. Para quitar esas marcas, use limpiador para placas de cocción cerámicas con una esponja para placas de cerámica. 2 Si se deja evaporar toda el agua en ollas con una capa delgada de aluminio o cobre, dicha capa puede dejar una coloración negra en la superficie de la placa de cocción.
MANTENIMIENTO 37 Cuándo usar EasyClean® Método sugerido de limpieza Ejemplo de suciedad en el horno Tipos de suciedad Alimentos comunes que pueden ensuciar el horno Gotitas o manchitas Queso u otros ingredientes Pizza Bistecs, asados EasyClean® Self Clean* (Autolimpieza) Pescado, asado Salpicadura leve Grasa/aceite Salpicadura mediana a grande Grasa/aceite Carne rostizada a alta temperatura Relleno o suciedad de alimentos con azúcar Tartas Crema o salsa de tomate Estofados Gotas o mancha
38 MANTENIMIENTO 5 Atomice o eche 4/5 de agua abajo, en el centro de la cavidad. La superficie abajo de la estufa debe estar completamente cubierta para mojar todos los residuos. Añade agua si es necesario. NOTA Si limpia varias estufas, use del bote entero lleno de agua para limpiar cada estufa. No rocíe agua directamente en la puerta. Si lo hace, el agua chorreará al piso. 6 Cierre la puerta del horno. Presione EasyClean®. Presione Start.
MANTENIMIENTO 39 Self Clean (Autolimpieza) El ciclo Autolimpieza usa temperaturas sumamente altas para limpiar la cavidad del horno. Cuando se ejecute el ciclo de Autolimpieza, es posible que sienta humo u olor. Esto es normal; especialmente si el horno está muy sucio. Durante el ciclo Autolimpieza, no se pueden usar las hornallas de la placa de cocción. NOTA •• Quite los estantes del horno y los accesorios antes de iniciar el ciclo Autolimpieza.
40 MANTENIMIENTO Configuración de Autolimpieza con inicio retardado 1 Quite todos los estantes y los accesorios del horno. 2 Presione Self Clean. El horno entra de manera predeterminada en la limpieza automática de cuatro horas recomendada para un horno moderadamente sucio. Presione dos veces para una limpieza de cinco horas o tres veces para la limpieza de tres horas. NOTA •• El ciclo Autolimpieza no se puede iniciar si está activa la función Bloqueo.
MANTENIMIENTO 41 Puerta del horno Reborde decorativo y pintado •• Use agua jabonosa para limpiar bien la puerta del horno. Enjuague bien. No sumerja la puerta en agua. Para la limpieza general, use un paño con agua jabonosa caliente. En el caso de suciedad más difícil y grasa acumulada, aplique detergente líquido directamente sobre la suciedad. Déjelo reposar allí entre 30 y 60 minutos. Enjuague con un paño húmedo y seque. No use limpiadores abrasivos.
42 MANTENIMIENTO Asadera y rejilla Retirar y reemplazar la puerta removible del horno y el cajón PRECAUCIÓN •• No guarde asaderas ni rejillas sucias en ninguna parte de la estufa. •• No limpie la asadera ni la rejilla en los modos de autolimpieza. •• Tenga cuidado cuando quite y levante la puerta. •• No levante la puerta de la manija. La puerta es muy pesada. •• Quite la rejilla de la asadera. Vierta cuidadosamente la grasa de la asadera en un recipiente adecuado.
MANTENIMIENTO 43 Colocación de la puerta Remover el cajón Tome firmemente ambos lados de la puerta desde la parte superior. 2 Con la puerta en el mismo ángulo que la posición de removido, apoye la hendidura de los brazos de las bisagras en el borde inferior de las ranuras de las bisagras. Las muescas de los brazos de las bisagras deben estar totalmente apoyadas en el borde inferior de las ranuras. PRECAUCIÓN Desconecte la energía eléctrica de la estufa desde el fusible principal o el panel disyuntor.
44 SOLUCIÓN DE PROBLEMAS SOLUCIÓN DE PROBLEMAS PREGUNTAS FRECUENTES ¿Qué tipo de batería de cocina se recomienda para usar con la placa de cocción? •• Los sartenes deben tener fondo plano y laterales rectos. •• Use solamente sartenes de metal grueso. •• El tamaño del sartén debe coincidir con la cantidad de comida que se preparará y el tamaño de la hornalla. •• Use tapas herméticas. Durante la cocción por convección, el ventilador se detiene cuando abro la puerta. ¿Es normal? Sí, es normal.
SOLUCIÓN DE PROBLEMAS 45 ¿Por qué no funcionan los botones de función? Mi estufa todavía está sucia después de ejecutar el ciclo EasyClean®. ¿Qué más debo hacer? El ciclo EasyClean® solo ayuda a aflojar la suciedad leve de la estufa con horno para ayudar en la limpieza manual del horno. No quita automáticamente toda la suciedad después del ciclo. Es necesario fregar un poco el horno después de ejecutar el ciclo EasyClean®. Probé fregar el horno después de ejecutar EasyClean®, pero hay suciedad que queda.
46 SOLUCIÓN DE PROBLEMAS Antes de llamar al servicio técnico Antes de llamar para solicitar servicio, revise esta lista. Puede ahorrarle tiempo y gastos. La lista incluye sucesos comunes que no son consecuencia de problemas de fabricación ni de los materiales de este electrodoméstico. Síntomas Causas/soluciones posibles •• Mala instalación. Coloque el estante en el centro del horno. Coloque un nivelador en el estante del horno.
SOLUCIÓN DE PROBLEMAS 47 Síntomas Causas/soluciones posibles •• El enchufe de la estufa no está insertado completamente en el tomacorriente. - Asegúrese de que el enchufe esté conectado a un toma funcional y conectado a tierra. •• Es posible que se haya quemado un fusible o que se haya disparado el disyuntor de su casa. - Reemplace el fusible o restablezca el disyuntor. •• Los controles del horno están mal configurados. - Consulte la sección Uso del horno. •• Horno demasiado caliente.
48 SOLUCIÓN DE PROBLEMAS Síntomas Causas/soluciones posibles •• Se usó papel de aluminio en la asadera y la rejilla no se colocó correctamente ni se cortó como se recomendó. La comida no se asa correctamente - Consulte la sección Uso del horno. •• En algunas áreas, el voltaje puede ser bajo. - Precaliente el asador durante 5 a 7 minutos. - Consulte la Guía de recomendaciones para asar.
SOLUCIÓN DE PROBLEMAS 49 Síntomas Humo excesivo durante un ciclo de Autolimpieza (en algunos modelos) Causas/soluciones posibles •• Suciedad excesiva. - Presione el botón Clear/Off. Abra las ventanas para sacar el humo de la habitación. Espere hasta que se cancele el modo de Autolimpieza. Limpie el exceso de suciedad y reinicie la limpieza. La puerta del horno no se abre después de un ciclo de Autolimpieza - Deje que el horno se enfríe a una temperatura inferior a la de bloqueo.
50 Función Smart Diagnosis™ (Diagnóstico Inteligente) Función Smart Diagnosis™ (Diagnóstico Inteligente) En caso de experimentar algún problema con el aparato, el mismo tiene la capacidad de transmitir datos a través de su teléfono al Centro de información del cliente de LG. Los modelos equipados con Wi-Fi pueden también transmitir datos a un teléfono inteligente usando la aplicación LG SmartThinQ.
GARANTÍA LIMITADA 51 GARANTÍA LIMITADA (EE. UU.) AVISO DE ARBITRAJE: ESTA GARANTÍA LIMITADA CONTIENE UNA CLÁUSULA DE ARBITRAJE QUE LE DEMANDA A USTED Y A LG RESOLVER CONFLICTOS A TRAVÉS DE UN ARBITRAJE VINCULANTE EN LUGAR DE HACERLO EN LA CORTE, A MENOS QUE USTED DECIDA NO PARTICIPAR. EN EL ARBITRAJE NO ESTÁN PERMITIDAS LAS ACCIONES COLECTIVAS NI LOS JUICIOS CON JURADO. POR FAVOR, VEA A CONTINUACIÓN LA SECCIÓN TITULADA “PROCEDIMIENTO PARA RESOLVER CONFLICTOS”.
52 GARANTÍA LIMITADA No cubierto por esta garantía limitada Problema •• Grieta en la cubierta. Causa Prevención Grieta en la cubierta debida al impacto de un objeto Grieta primaria •• No almacene objetos pesados sobre la superficie de los anafes ya que podrían caerse y dañarlos. •• NO raye los anafes o estos podrían agrietarse. •• Limpie los anafes antes y después de usarlos. Quiebre mecánico Fuera de garantía Grieta secundaria En garantía •• El esmalte de los cubierta está saltado.
GARANTÍA LIMITADA 53 El costo de reparación o reemplazo bajo las circunstancias excluidas anteriores correrá a cargo del consumidor. PARA OBTENER SERVICIO EN GARANTÍA E INFORMACIÓN ADICIONAL Llame al 1-800-243-0000 y seleccione la opción apropiada desde el menú. O visite nuestro sitio web en http://www.lg.com O por correo: LG Electronics Customer Service P.O.
LG Customer Information Center 1-800-243-0000 1-888-542-2623 USA CANADA Register your product Online! www.lg.