Full Product Manual

27OPERATION
ENGLISH
Cleaning the Dispenser Tray
Wipe the entire area with a damp cloth. The
dispenser tray may become wet easily due to
spilled ice or water.
Locking the Ice and Water
Dispenser
Press and hold the Lock button for three seconds
to lock the dispenser and all the control panel
functions. Follow the same instructions to unlock.
In-Door Ice Bin
Before Using the In-Door Ice Bin
The icemaker stops producing ice when the in-
door ice bin is full. To make room for additional ice,
empty the ice bin into another location in the
freezer compartment. During use, the ice may
stack unevenly in the bin, causing the icemaker to
misread the number of ice cubes and stop
producing ice. Shaking the ice bin to level the ice
within it can reduce this problem.
CAUTION
of the in-door ice bin
and dispenser chute. Failure to do so may result
in damage or personal injury.
from the icemaker tray area to avoid personal
injury.
damage the icemaker.
collect ice. Such containers may chip or break
resulting in glass fragments in the ice.
To prevent ice cubes from melting and leaking
from the dispenser, ALWAYS empty the ice bin
when the icemaker is turned OFF for more than a
few hours.
The ice passage may become blocked with frost if
only crushed ice is used. Remove the frost that
accumulates by removing the ice bin and clearing
the passage with a rubber spatula. Dispensing
cubed ice can also help prevent frost buildup.
Detaching/Assembling the In-Door
Ice Bin
CAUTION
Electronics service center should disassemble or
repair the icemaker.
from the icemaker tray area to avoid personal
injury.
shutoff (feeler arm)
when replacing the ice bin.
1
To detach, lift the ice storage bin slightly and
pull it out as shown in the figure.
NOTE
dropping it.
2
To assemble, carefully insert the in-door ice
bin, slanting the top slightly to fit it under the
icemaker.