OWNER’S MANUAL Hom Bot Before using, please carefully read the Safety Precautions pages to allow for safe operation of the product. After reading the operation manual, please keep it in an easily accessible location. LRV790R www.lg.
TABLE OF CONTENTS 1 Hom Bot WARRANTY 1 LG Hom Bot WARRANTY 2 BEFORE USE 5 ADDITIONAL INFORMATION 36~38 Troubleshooting Before you call for service 39 6 REFERENCE 2 Features 3~6 Safety precautions 40 Product specifications 7 Included with product 41 Open source software notice 8~9 Parts 10~11 Button functions 12 Display status 13 Before operating 14 Overview 3 METHOD OF USE 15 16 17 18~19 20~21 22~23 24 25 26 27 28~29 How to install the home station How to turn the Hom Bot powe
LG Hom Bot WARRANTY LG Electronics Inc. will repair or replace your product, at LG’s option, if it proves to be defective in material or workmanship under personal household use, during the warranty period set forth below, effective from the date of original consumer purchase of the product. This limited warranty is good only to the original purchaser of the product and effective only when used in U.S.A. and Canada.
FEATURES Corner Master By having adopted a brand new concept design that prevents the Hom Bot from bumping into walls, the Hom Bot's cleaning performance is incredibly efficient. Learning Mode The Hom Bot is capable of memorizing the cleaning environment via its Smart Operation feature for smarter cleaning. Turbo Mode In Turbo Mode, the Hom Bot runs with more suction and higher motor power. Turbo Mode is automatically activated on carpeting.
SAFETY PRECAUTIONS This guide contains many important safety messages. Always read and obey all safety messages. Basic safety precautions After reading this manual, keep it in an easily accessible location. This is the safety alert symbol. This symbol alerts you to potential hazards that can result in property damage and/or serious bodily harm or death. WARNING Indicates a hazardous situation which, if not avoided, could result in death or serious injury.
SAFETY PRECAUTIONS WARNING 1) Place the cords from other appliances out of the area to be cleaned. 2) Do not operate the vacuum in a room where an infant or child is sleeping. 3) D o not operate the vacuum in an area where there are lit candles or fragile objects on the floor. 4) D o not operate the vacuum in a room that has lit candles on furniture that the vacuum may acciden tally hit or bump into. 5) Do not allow children to sit on the vacuum. 6) Do not use the vacuum on a wet surface.
SAFETY PRECAUTIONS WARNING • Do not operate the Hom Bot on narrow and high furniture such as a wardrobe, refrigerator, desk, table, etc. Doing so can cause injury, product failure or damage which is not covered by the warranty. • Do not activate the device on a floor that has more than a 10 degree incline. The device may not work properly. • Do not leave Children or pets near the Hom Bot unsupervised. Doing so can cause injury or product damage.
SAFETY PRECAUTIONS CAUTION • If the floor is wet or has wet spots, wipe them up before using the Hom Bot. Do not use the Hom Bot on a wet surface. Failure to do so can cause product failure. • When the Hom Bot is operating, it may hit a chair leg, desk leg, table leg or other narrow pieces of furniture. For quicker and better cleaning, place the dining chairs on top of the dining table. • When attaching the mop, do not block the bottom camera sensor.
INCLUDED WITH PRODUCT Hom Bot Remote control Home station s Not all accessories are available with every model. OWNER’S MANUAL Hom Bot Quick Guide Hom bot Before using, please carefully read the Safety Precautions pages to allow for safe operation of the product. After reading the operation manual, please keep it in an easily accessible location. This guide briefly describes how to use the Hom bot For more detail, please refer to the user manual.
PARTS - Hom Bot Top view Upper camera sensor Dust bin cover Display & Manipulation button Dust bin cover button Front view Ultrasonic sensors Obstacle detecting sensor window, Detecting sensors of home station and Receiving sensors of remote control Rear view Power switch Ventilation port Bottom view Cliff detection sensors Side brush Charging terminal Brush Wheel Battery Lower camera sensor s Images may vary by model.
PARTS – HOME STATION / DUST BIN Home station Remote control holder Charging terminal Power cord fixing hook Dust bin Dust bin handle Cleaning brush Dust bin cover Suction port flap Sponge filter Dust bin cover opening button HEPA filter Filter cover s Images may vary by model.
BUTTON FUNCTIONS – Hom Bot TURBO START/STOP • After the power switch is in the ON position, press the Start/Stop button to start cleaning. • Press to stop cleaning. • If button is pressed during Smart Diagnosis, the diagnosis will end. MODE •P ress to change the mode. The mode icon will illuminate on the display when selected. • The Spot Clean mode is not available if the Hom Bot is at the home station.
BUTTON FUNCTIONS – REMOTE CONTROL Start Start cleaning. Mode Change the cleaning mode. Directional button This button enables manual operation or selection of an area in the My Space cleaning mode. Repeat Start or stop Repeat mode. Schedule Schedule a cleaning time. Clock Used to set the current time indicated on the Hom Bot. Tip Home Send the Hom Bot to the home station. Turbo Activate or deactivate Turbo Mode. Stop Stop cleaning, cancel a cleaning schedule or stop a time setting.
DISPLAY STATUS Mute Battery level Lock AM/PM Schedule (One Time or Every Day setting) Turbo Repeat cleaning Home station Zigzag cleaning Cell by Cell cleaning Tip 12 My Space cleaning Time display • The Hom Bot will default to the last clean mode selected.
BEFORE OPERATING Before cleaning • Do not use this device in a room where a child is left alone. The child could be injured. • Remove fragile or unnecessary objects from the room to be cleaned. ; especially expensive ceramics and valuables in risk of being knocked over. • Close the cover of the dust bin before cleaning. • Remove any moisture that might be on the floor. • Remove cables, strips, towels, mats etc. from the floor so they will not get caught in the brush. • Make sure battery is charged.
OVERVIEW 1 Install the home station. Insert the power cord plug into an outlet and locate the station against a wall. If power is not supplied to the home station, the Hom Bot will not charge. 2 Turn on the power supply of the Hom Bot. 3 Check the dust bin. 4 Select the desired cleaning mode. 5 Start cleaning. 6 Automatic charge. 4.5 Turn on the power switch located on the rear-left side of the Hom Bot. Press the Start/Stop button on the Hom Bot or the Start button on the remote control.
HOW TO INSTALL THE HOME STATION How to Install the Home Station 1. P osition the home station against a wall on hard level flooring to prevent sliding during docking. I t is not recommended to install the home station on carpet. Doing so may cause the Hom Bot to have difficulty docking. R emove objects within 4.5 ft to the right and left side and within 6 ft to the front. 4.5 4.5 6 2. Plug the power cord into an outlet.
HOW TO TURN THE Hom Bot POWER SUPPLY ON & OFF Turning on the main power supply Flip the power switch to the ON position. ※D o not press the Start/Stop button at the same time as flipping the power switch. Doing so may delay the operation. ※ Turn off the power switch if the Hom Bot will not be used for a long period of time, in order to protect the battery. The Hom Bot cannot charge if the main switch is in the "OFF" position.
HOW TO START AND STOP CLEANING Using the buttons on the Hom Bot After the Hom Bot is turned on, press the START/STOP button to begin cleaning. A melody will sound and cleaning will begin. Press the START/STOP button during the cleaning cycle to stop cleaning. ※ When the ‘START/STOP’ button is pressed while the Hom Bot is in standby mode, it will turn on. Press the ‘START/STOP’ button one more time to start cleaning.
HOW TO CHARGE THE BATTERY Automatic charging The Hom Bot returns to the home station at the end of a cleaning cycle or when its battery is running low. ※ I f 10 minutes elapse without the Hom Bot moving or the battery is too low, the Hom Bot will automatically go into standby mode. ※ The power switch has to be in the ON position in order for the Hom Bot to charge. ※ After the battery is fully charged, the Hom Bot will continue cleaning in the nearest area that has not yet been cleaned.
HOW TO CHARGE THE BATTERY Battery Level Indicator The battery life level is located on the status display: • If recharging is in progress, the battery level icon flickers. • If recharging is complete, only the 'Battery' and 'Clean Mode' icons are displayed to save energy. • The battery level icon will flicker when the Hom Bot needs to be charged.
CLEANING MODES Zigzag Cleaning In Zigzag mode, the Hom Bot zigzags through each spot of the cleaning area. Select the Zigzag mode to quickly clean an area. To select Zigzag mode: Press the Mode button continuously, on either the Hom Bot or remote control, until the Zigzag icon illuminates. ※ The Hom Bot defaults to Zigzag mode. Cell by Cell Cleaning Select the Cell by Cell mode for meticulous cleaning. In this mode, the Hom Bot divides the area to be cleaned into rectangular spaces.
CLEANING MODES My Space Cleaning My Space cleaning allows you to manually select the area in which the Hom Bot will clean. To select My Space: 1. Press the My Space button. 2. U sing the arrow buttons on the remote control, guide the Hom Bot around the perimeter of the space you would like cleaned. ※ Cleaning space must be less that 1 m. My Space 3. Once the area is specified, press the Start button.
AUXILIARY CLEANING MODES Manual cleaning Manual mode allows you to move the Hom Bot manually to the front, back and either side using the arrow buttons on the remote control. While in Manual mode, the Hom Bot will run into obstacles placed behind it if the back arrow key on the remote control is held down. Spot Cleaning The Spot mode cleans the area it is placed within a 4.5 ft diameter. To start Spot mode: 1. Place the Hom Bot in the area that you would like to have cleaned. 2.
AUXILIARY CLEANING MODES Turbo Mode In 'Turbo' mode, the Hom Bot cleans more powerfully. Activate this mode by pressing the 'Turbo' button on the remote control, or on main body. You can cancel by pressing the 'Turbo' button again. ※< Turbo Mode (Floor Master Function)> ‘Turbo mode’ will automatically operate when the Hom Bot cleans carpets. Repeat Mode Pressing 'Repeat' button on Remote control will activate 'Repeat' mode, with a voice message.
TIME SETTING You can set the current time on the Hom Bot. Pressing ‘Clock' button on Remote control, when Hom Bot is waiting, will start the current time setting. Set the time units by using 'uv' buttons on Remote control. Flickering Flickering s Select by using ' s' buttons on the Remote control. The function can be heard through the voice guide. Flickering Set the unit of minutes using 'uv' buttons on Remote control. Set the AM/PM using 'uv' buttons on Remote control.
SCHEDULED CLEANING You can schedule a cleaning so that the Hom Bot starts cleaning at a scheduled time. Pressing 'Schedule' button on Remote control, when the battery is recharging, will start the scheduled cleaning setting. Setting/Cancelling the reservation is only possible when the unit is recharging. Flickering Select 'One Time' or 'Everyday' option by using 'uv' buttons on Remote control. A voice message will confirm the schedule. Set the hour units by using the 'uv' buttons on Remote control.
MOP CLEANING (OPTION) By attaching the ultra microfiber mop, you can effectively use the Hom Bot to remove dust. When the mop plate is attached, the Hom Bot will not climb on to carpets or over thresholds, in order to prevent transferring dirt from the mop. Caution Do not cover the bottom camera with the microfiber mop. It can cause the vacuum to malfunction. For mop cleaning, mount the mop and mop plate to the Hom Bot according to the following instructions: 1.
LOCATION SEARCH FUNCTION The Hom Bot remembers its location while cleaning. If the user moves the Hom Bot while it is operating, it will search for the location it was moved from by using its navigational location search function before continuing to clean. ※ The navigating function will be activated after the Hom Bot adequately recognizes the cleaning environment. Change location Manual Relocation. 1. Locate the Hom Bot near the location where it was originally moved from.
SMART DIAGNOSIS Hom Bot uses the Smart Diagnosis feature to run self-diagnosis. If any irregularity is found from the diagnosis, please contact the local LG Electronics service center. ※ During Smart Diagnosis, the Hom Bot will move within a 1.64 ft radius. So, make sure no objects are in the way within a 1 m radius around the Home Station, before starting Smart Diagnosis. 1. Turn ON the Main Power Switch on the back after making sure the Hom Bot is attached to the Home Station.
SMART DIAGNOSIS If a voice message is announced after Smart Diagnosis, refer to the following table to take proper actions. Voice message Measures (for reference) Hom Bot smart diagnosis will be started. Please step away and clear around 1 meter around the home station. Smart diagnosis can start when it is being charged. Please dock Hom Bot to the home station to charge. No defect found during diagnosis. Diagnosis mode cannot be operated due to a low battery. Please try again after the battery is charged.
CLEANING THE DUST BIN If the dust bin is full, suction power will be reduced. Clean the dust bin before and after each cleaning session. Clean the dust bin using the following sequence: 1. O pen the dust bin cover by pressing the PUSH button on the Hom Bot. 2. G rab the handle of the dust bin and pull it upward. 3. P ull the hook on the left of Filter Cover on the rear of Dust Bin to separate the filter and the sponge. ※ Note that separating the filter may result in dust dropping. ※ Refer to p.
CLEANING THE DUST BIN FILTER The Dust Bin Filter consists of a HEPA Filter and Sponge Filter. Clean both the HEPA and Sponge filters as per the following sequence. 1. P ull the hook on the left of the HEPA Filter module on the rear side of Dust Bin to separate the HEPA Filter and the sponge. 2. Thoroughly clean out the fine dust particles on the HEPA Filter, with a vacuum cleaner or cleaning brush. ※ Do NOT wash the HEPA Filter with water. Its suction power will be reduced. 3.
CLEANING THE BRUSH The rotating Brush, located on the bottom of Hom Bot, helps collect the dust. Clean the Brush as per the following sequence. ※ Before turning over the main unit, lay a soft cloth on the floor and remove the Dust Bin. Otherwise, the main unit can get scratches and dust will fall from Dust Bin. Turn the Main Power Switch OFF before starting the clean. Put the Hom Bot upside down on a soft cloth.
CLEANING THE SENSOR/CHARGING TERMINAL There are sensors on the Hom Bot that detect obstacles, stairways and the home station for charging the battery. In order to maintain the performance of the Hom Bot, regularly clean the sensors and charging terminal as follows: 1. Turn off the power switch on the bottom of the Hom Bot. Injury can be caused by the activation of the Hom Bot if the main power is not turned off. 2. L ay a smooth cloth on the floor, overturn the Hom Bot and put it on the cloth.
CLEANING THE SIDE BRUSH Foreign objects/materials such as hair can easily adhere to the side brush. Remove such materials at least once a week. If excessive amounts of foreign materials are stuck to the brush, there is the risk of damage to the brushes. If the floor is rough or walls are frequently cleaned, the side brush may bend or become damaged. In this case, use the following method to straighten the side brush. 1. The following procedure is helpful in restoring deformed brushes. 2.
CLEANING THE ULTRA MICROFIBER MOP (OPTION) To avoid odors, dirt and dust should be washed off the mop after it is used for cleaning. Follow these directions to wash the ultra microfiber mop: 1. Separate the ultra microfiber mop from the mop plate. 8.26 in 2. Carefully clean it with warm water. 3. U se the Mop after completely drying it in direct sunlight. ※ I f the Mop is used in a damp or wet state, it will cause the Hom Bot to malfunction.
TROUBLESHOOTING Upon a voice message, "The wheels are not touching the floor. Please move Hom Bot onto flat floor." A warning message will be given if a wheel does not contact the floor surface for any reason. • Is a wheel trapped in the front door, balcony, stairway, etc? s Move the Hom Bot on to the flat floor. Upon a voice message, "Please remove any foreign material on the left/right wheel.
TROUBLESHOOTING Upon a voice message, "Please check that the dust bin and filter are properly installed." A warning message will be given if there is no Dust Bin or Filter Cover fitted. • Is the Dust Bin fitted to the Hom Bot? sO pen the Dust Bin Cover and check to ensure the Dust Bin is in place. sD o NOT leave the Dust Bin Cover open. • Make sure the Filter Cover is assembled onto the Dust Bin. Upon a voice message, "Battery is low. Please move Hom Bot onto the home station to charge.
TROUBLESHOOTING Upon a voice message, "Please remove any foreign material from the brush on the bottom of the Hom Bot." A warning message will be given if foreign materials restrict the Brush's rotation. Lay a soft cloth on the floor and put the Hom Bot upside down on it. ※ Before turning over the main unit, remove the Dust Bin. Otherwise, it will cause dust to fall from Dust Bin. • The brush is making a loud, abnormal sound.
BEFORE YOU CALL FOR SERVICE Confirm before reporting the failure of Hom Bot. Problem Solutions (Reference page) The power supply cannot be turned on. Check that the power switch is turned on. (Page 16) The power supply automatically turns off. This is not a failure. Hom Bot has its own power saving function. If it is not used for ten minutes after the power supply is turned on, the power will automatically turn off. (Page 18) The Hom Bot will not charge.
PRODUCT SPECIFICATIONS 40 Item/Model LG Hom Bot LRV790R External Dimensions 13.3 in × 13.3 in × 3.5 in Weight 6.6 lb Power Consumption 18 W Battery (Fully Charging) DC 16.8 V Traveling Velocity 13.8 in/sec Use Time Approx.
REFERENCE ITEMS Open source software notice To obtain the source code under GPL, LGPL, MPL and other open source licenses, that is contained in this product, please visit http://opensource.lge.com. In addition to the source code, all referred license terms, warranty disclaimers and copyright notices are available for download. Dis/Assembling the battery 1 2 Turn off the main power switch on the back-left side of the Hom Bot.
Disposal of waste batteries/accumulators 1. When this crossed-out wheeled bin symbol is attached to batteries/accumulators of Your product it means they are covered by European Directive 2006/66/CE. 2. This symbol may be combined with chemical symbols for mercury(Hg), cadmium(Cd) or lead(Pb) if the battery Contains more that 0.0005% of mercury, 0.002% of cadmium or 0.004% of lead. 3.
MEMO
MEMO
MEMO
Made in Korea