Owners manual

MOP CLEANING (OPTION)

1. Attach the ultra microﬁber mop to the Velcro

of the mop plate as shown in the ﬁgure.

2. Firmly push the Mop Plate into the furrows

until you hear a 'click' sound.

※

Note that, if the Mop Plate is not secured

correctly, it may separate during the

cleaning.

3. It is essential that the ﬁxing hooks on the Mop

Plate align correctly on to the ﬁxing grooves

on the underside of the cleaner.

For mop cleaning, mount the mop and mop plate to the Hom Bot according to the following instructions:

By attaching the ultra microﬁber mop, you can

effectively use the Hom Bot to remove dust.

When the mop plate is attached, the Hom Bot will

not climb on to carpets or over thresholds, in order

to prevent transferring dirt from the mop.

• To avoid odors, wash any foreign material or dust off the mop after cleaning is complete.

• To avoid staining floors, do not use the ultra microfiber mop to clean when dirt is mixed with

liquids such as coffee or ink.

• To avoid damage to carpets from the Velcro or dirt transfer from the mop, do not clean the

carpet while the mop plate or mop is attached.

• Keep the ultra microfiber mop dry. Do not use it on wet surfaces.

If there is moisture, it can interfere with the navigation.

• Smart Diagnosis feature is not available, when the Mop Plate is attached.

Fixing hook

Fixing groove

“Click!”

Tip

Caution

Do not cover the bottom camera

with the microﬁber mop. It can

cause the vacuum to malfunction.