RC7793CML.AA1ULL_RV0011V_ENG VCR & DVD RECORDER OWNER’S MANUAL MODEL: LRY-517 Before connecting, operating or adjusting this product, please read this owner’s manual carefully and completely. Call us and we will guide you through your first recording, for free.
CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
IMPORTANT SAFETY INSTRUCTIONS CAUTION: PLEASE READ AND OBSERVE ALL WARNINGS AND INSTRUCTIONS IN THIS OWNER’S MANUAL. AND THOSE MARKED ON THE PRODUCT. RETAIN THIS BOOKLET FOR FUTURE REFERENCE. This product has been designed and manufactured to assure personal safety. Improper use can result in electric shock or fire hazard. The safeguards incorporated in this product will protect you if you observe the following procedures for installation, use, and servicing.
INTRODUCTION Symbol Used in this Manual . . . . . . . . . . . . . .6 About the Symbol Display . . . . . . . . . . . . .6 Notes on Discs . . . . . . . . . . . . . . . . . . . . . . . .6 Moisture Condensation . . . . . . . . . . . . . . . . . .6 Recordable and Playable Discs . . . . . . . . . . .7 The recommendable recordable DVD discs . .7 Playable Discs . . . . . . . . . . . . . . . . . . . . . . . . .8 Regional code of the recorder and DVDs . . . .8 Restrictions on video recording . . . . . . . . . . .
RECORDING About DVD recording . . . . . . . . . . . . . . . . . .40 Disc types and recording formats, modes, and settings . . . . . . . . . . . . . . . . . . . . . . . . . . . .40 Notes for recording . . . . . . . . . . . . . . . . . . . .40 Basic Recording from a TV . . . . . . . . . . . . . .41 Instant Timer Recording . . . . . . . . . . . . . .41-42 Checking the Recording Time . . . . . . . . . . . .41 To Extend the Recording Time . . . . . . . . . . .41 To Pause the Recording . . . . . . . . . . . . . .
Introduction To ensure proper use of this product, please read this owner’s manual carefully and retain for future reference. Symbol Used in this Manual Indicates hazards likely to cause harm to the unit itself or other material damage. Note: Indicates special notes and operating features. Tip: Indicates tips and hints for making the task easier. About the Symbol Display “ ” may appear on your TV display during operation and indicates that the function is not permitted by this unit or the disc.
Introduction Recordable and Playable Discs DVD-RW (DVD - ReWritable) DVD-RW discs can be formatted for VR mode recording or Video mode recording. These Discs can be recorded on repeatedly. Recordings can be erased, then you can record again on the same Disc.
Playable Discs DVD (8 cm / 12 cm disc) Discs such as movies that can be purchased or rented Video CD (VCD) (8 cm / 12 cm disc) VIDEO CDs or CD-Rs/CD-RWs in VIDEO CD/Super VIDEO CD format Audio CD (8 cm / 12 cm disc) Music CDs or CD-Rs/CD-RWs in music CD format that can be purchased CD-R/CD-RW (8 cm / 12 cm disc) CD-R/CD-RW discs that contain audio titles, MP3, WMA, JPEG or DivX files.
Notice for Progressive Scan Use • You cannot record copy-protected video using this recorder. Copy-protected video includes DVDVideo discs and some satellite broadcasts. If copy-protected material is encountered during a recording, recording will pause or stop automatically and an error message will be displayed onscreen. • Video that is ‘copy-once only’ can only be recorded using a DVD-RW disc in VR mode or DVDRAM disc with CPRM (see below).
Card useable on this unit • Compact Flash Card (CF) • Micro Drive (MD) • Secure Digital Card (SD) • Multi Media Card (MMC) • SmartMedia Card (SMC) • xD-Picture Card (xD) • Memory Stick (MS) • Memory Stick Pro (MS-Pro) • Compatible with: FAT 12, FAT 16, or FAT 32 • Only use the memory cards recommended above. Using Memory Card 1. Insert a memory card. 2. Press MEMORY on the Remote Control while in the DVD Tuner mode. The Memory Card slot choice menu appears on the TV screen.
DVD +R (Double Layer) Double layer recording technology offers two recordable layers on a single DVD disc, providing nearly double the capacity of 4.7GB single layer DVDs. The greatest, most valuable benefit of double layer recording technology is increased capacity. Storage space is nearly doubled with double layer DVD+R media, allowing consumers to burn up to 8.5GB of video on a single DVD+R disc. DVD ±R / DVD ±RW DVD -R and DVD +R are two different standards for recordable DVD drives and discs.
Front Panel a b f c g h a POWER button and indicator Switches the Recorder ON and OFF. Lights green when the Recorder is turned on. b Disc Tray (DVD deck) Insert a disc here. c Z OPEN/CLOSE Opens or closes the disc tray. d Cassette Compartment (VCR deck) Insert a video cassette here. e Z EJECT Ejects the tape in the VCR deck. f AV 2 IN - VIDEO /AUDIO (Left/Right) Connect the audio/video output of an external source (Audio system, TV/ Monitor, VCR, Camcorder, etc.).
DVD SVCD M.CARD A B PRG TTL VR TV Indicates the type of disc loaded. DVD SVCD Indicates when Memory Card is activated. M.CARD A REC B CHP TRK DUB CHP TRK Indicates current chapter or track number DUB Indicates that a DVD to VCR (or VCR to DVD) dubbing is in progress. Indicates when the Recorder is Locked. Hi-Fi Indicates when the Recorder is playing a tape in Hi-Fi. ST Indicates a stereo broadcast is being received. SAP Indicates when a SAP BILINGUAL The recorder is recording.
Remote Control BACKWARD / FORWARD (m/M) RANDOM - DVD: Search backward or forward. - VCR: Rewinds/Advances the tape during the STOP mode, for fast reverse/ forward picture search. REC MODE CHP ADD z REC Inserts a chapter marker when playing/ recording. CH/TRK(v/V): Selects a program. Adjusts manually the tape’s picture onscreen. CLEAR Removes a mark on the Marker Search menu. DISPLAY Accesses On-Screen Display. Displays information of current status. DUBBING Press to copy DVD to VCR (or VCR to DVD).
a b h cd ef i j a ANT.IN Connect the antenna to this terminal. b AC Power Cord Plug into the power source. c AV 1 IN (VIDEO IN /AUDIO IN (Left/Right)) Connect the audio/video output of an external source (Audio system, TV/Monitor, VCR, Camcorder). d AV OUT (VIDEO OUT/AUDIO OUT (Left/Right)) Connect to a TV with video and audio inputs. e COMPONENT/PROGRESSIVE SCAN VIDEO OUT (Y Pb Pr) Connect to a TV with Y Pb Pr inputs.
Connecting an Antenna or Cable TV To view or record a CATV channel a Antenna: Disconnect the antenna from the rear of the TV and identify the antenna cable. If it is a round 75 ohm coaxial cable connect it directly to the jack marked ANT.IN on your Recorder. If your antenna cable is flat connect it to a 300-ohm to 75-ohm antenna adaptor (not supplied) and slip the adaptor over the ANT.IN jack. Don’t attempt to screw it into to the Recorder. 2.
Connect the RF.OUT jack on the Recorder to the antenna in jack on the TV using the supplied 75-ohm Coaxial Cable (R). How to set the Recorder’s RF output channel 1. When the Recorder is turned off, press and hold CH (V/v) on the front panel for more than five seconds. [RF-03] or [RF-04] appears in the display window. 2. Press CH (V/v) to change the RF output channel (RF-03 or RF-04). 3. Tune the TV to this channel.
Connecting to an amplifier equipped with two channel digital stereo (PCM) or to an Audio/Video receiver equipped with a multi-channel decoder (Dolby Digital™, MPEG 2, or DTS) 1. Connect one of the Recorder’s DIGITAL AUDIO OUT jacks (OPTICAL O, COAXIAL X) to the corresponding in jack on your amplifier. Use an optional digital (OPTICAL O, COAXIAL X) audio cable. 2. You will need to activate the Recorder ’s digital output. (See [Audio Settings] on page 22).
In this menu system, there are several ways to customize the settings provided. Most menus consist of three levels to set up the options, but some require greater depth for the variety of settings. General Operation 1. Press SETUP and the Setup menu appears. General Settings Tuning Band Select 1. Select the [Tuning Band] option then press B . 2. Use v / V to select the tuning band (TV or CATV) option then press ENTER. TV: If you are using a standard antenna to receive channels.
To Add or Erase Channels from Memory This feature allows you to add to or erase channels from memory manually. 1. Select the [CH. Add/Del] option. 2. Press B to move to the third level. [Edit] icon is highlighted. 3. Press ENTER and the Channel Edit menu appears. Note : The Auto Clock Feature enables the Recorder to set up the clock when the Recorder is turned off. Manual If your local TV station does not send date and time information, or sends incorrect information, you can set the clock manually. 4.
Progressive Scan Progressive Scan Video provides the highest quality pictures with less flickering. [ON] : 1. Select the [Factory Setting] option. 2. Press B to select [SET] then press ENTER. The Initialize menu will appear. Using the COMPONENT/PROGRESSIVE SCAN VIDEO OUT jacks for connection to a TV or monitor that is compatible with a progressive scan signal.
Audio Settings Each DVD disc has a variety of audio output options. Set the Recorder’s Audio Output according to the type of audio system you use. Dolby Digital / DTS / MPEG [Bitstream]: Select [Bitstream] if you connect the DVD+VCR’s DIGITAL AUDIO OUT jack to an amplifier or other equipment with a Dolby Digital, DTS or MPEG decoder. [PCM] (for Dolby Digital / MPEG): Select when connected to a two-channel digital stereo amplifier.
Rating Some movies contain scenes that may not be suitable for children to view. Many of these discs contain parental control information that applies to the complete disc or to certain scenes on the disc. Movies and scenes are rated from 1 to 8, depending on the area. DVD video discs may or may not respond to the parental control setting if the Area code of the disc is set wrongly. Some discs offer more suitable scenes as an alternative. Ratings are area dependent.
Recording Settings Disc Record Mode You can set the picture quality for recording; XP (Excellent quality), SP (Standard quality), LP (Low quality), EP (Extend quality). Auto Chapter During recording, chapter markers are added automatically at fixed intervals. You can set this interval to 5 minutes or 10 minutes. To turn off automatic chapter marking, select [None]. 1. Select the [Disc Record Mode] option then press B. 2. Use v / V to select a desired Disc Record Mode (XP, SP, LP or EP). Disc Settings 3.
Finalize Disc Label Finalizing ‘fixes’ the recordings in place so that the disc can be played on a regular DVD player or computer equipped with a suitable DVD-ROM drive. Finalizing a Video mode disc creates a menu screen for navigating the disc. This is accessed by pressing LIST/DISC MENU or TITLE. Use the Disc Label feature to enter a name for the disc. This name appears when you load the disc and when you display disc information on-screen. • The Disc label can be up to 32 characters long.
PBC DivX Registration Code PBC stands for Playback Control and refers to special menus and navigation features that are available on some Video CDs. [ON]: Video CDs are played according to the PBC, if available. [OFF]: Video CDs are played the same way as Audio CDs. We provide you the DivX® VOD (Video On Demand registration code that allows you to rent and purchase videos using the DivX® VOD service. For more information, visit www.divx.com/vod. AutoPlay 3.
General Explanation of On-Screen Display Some DVDs require specific operation or allow only limited operation during playback. When this occurs, is displayed, action prohibited or not available. Displaying Disc Information on-screen You can display various information about the disc or tape loaded on-screen. Some items can be changed using the menu. 1. Press DISPLAY once to show current status. Example: DVD-RW in VR mode Displaying Information While Watching TV e.g., when DVD-RW in VR mode is inserted.
Playback VCR Tape Playback Press VCR button to select the device to be operated. Basic Instructions 1. Insert a pre-recorded video cassette. The indicator lights and the Recorder powers on automatically. Search This function lets you visually search for a tape section in either direction: forward and reverse. During the high-speed picture search modes, the audio is muted and horizontal lines (noise bars) appear.
This feature is useful if there is a section of tape you want to view immediately after recording or if you want to return to the same point several times. 1. Begin recording or playing a tape. 2. Press DISPLAY until the real-time counter is displayed on the TV screen. 3. At the point that you want to locate later, reset the real-time counter to [0:00:00] by pressing CLEAR. 4. Continue to play or record. 5. Press STOP (x) when recording or playback finishes. 3. To stop the playback, press STOP x.
Slow Motion -RWVR -R +R DVD -RWVideo RAM +RW VCD -R 1. Press BACKWARD (m) or FORWARD (M) during pause mode. 2. Use the BACKWARD (m) or FORWARD (M) to select the required speed: DVD : 4 steps (forward and backward) Video CD: 3 steps (forward only). 3. To exit Slow Motion mode, press N (PLAY). Search -RWVR +R DVD Marker Search -RWVR -RWVideo RAM +RW +R DVD -RWVideo RAM +RW VCD To enter a Marker You can start playback from up to six memorized points.
-RWVR -RWVideo DVD VCD RAM +RW -R +R Repeat A-B -RWVR -RWVideo DVD VCD RAM +RW -R +R 1. Press PAUSE/STEP (X) during playback. Advance the picture frame-by-frame by pressing PAUSE/STEP (X) repeatedly. To repeat a sequence during playback. 2. To exit still motion mode, press N (PLAY). 2. Press A-B again at your chosen end point. [REPEAT A - B] appears briefly on the TV screen and the repeat sequence begins.
Changing the Audio Soundtrack DVD Finding Locations on a Disc VCD Press AUDIO then press b / B repeatedly during playback to hear a different audio language or audio soundtrack if available. You can directly access any point on a video CD using this function within 95% of progress bar. Use this function only while a video CD is playing. Playback jumps to the point specified. Note: Some discs feature both Dolby Digital and DTS soundtracks. There is no analog audio output when DTS is selected.
Playing a DivX Movie File Movie menu options The Recorder can play Divx files on CD-R/RW or DVD±R/RW discs. Before playing DivX files, read “About DivX movie files” on page 34. 1. Press v / V to select a folder/file on the Movie menu then press ENTER. Movie menu options appear. 1. Use v / V to select a folder, and press ENTER twice. A list of files in the folder appears. 2. Use v / V to select a file then press N (PLAY). Playback starts. You can use variable playback functions. Refer to pages 29-32. 2.
About DivX movie files DivX disc compatibility with this recorder is limited as follows: Available resolution size of the DivX file is under 720x576 (W x H) pixel. The file name of the DivX subtitle is limited to characters. If there is impossible code to express in the DivX file, it may be displayed as “_” mark on the display. The total number of files and folders on the disc are free but the total number of files and folders on the folder should be less than 1999.
Playing an Audio CD or MP3/WMA files Audio CD and Music menu options 1. Press v / V to select a track/file or folder on the Audio CD or Music menu then press ENTER. The Recorder can play Audio CDs and MP3/WMA files on CD-ROM, CD-R/RW, DVD+R/RW, DVD-R/RW, DVD-RAM discs or Memory Card. Before playing MP3/WMA files, read [Notes on MP3/WMA Recordings] on page 36. Audio CD Once you insert an audio CD a menu appears on the TV screen. Use v / V to select a track then press N (PLAY) and playback starts. 2.
Changing the Audio Channel Press AUDIO repeatedly to hear a different audio channel (stereo, left or right). Random 1. Press RANDOM during playback or in stop mode. Random Playback begins immediately and [RANDOM] appears on the menu screen. 2. To return to normal playback, press RANDOM repeatedly until [RANDOM] disappears from the menu screen. Notes on MP3/WMA Recordings MP3/WMA disc compatibility with this unit is limited as follows: • • • • Tip: By pressing SKIP (.
Program Playback with Audio CD and MP3/WMA files The program function enables you to store your favourite tracks from any disc in the player memory. Program can contain 99 tracks (Audio CD) or 256 tracks (MP3/WMA). Program List menu options 1. Press v / V to select a track/file on the Program List then press ENTER. The menu options appear. 1. Use v / V to select a track/file or folder on the List then press ENTER. 2. Use v / V to select [Program Add] option then press ENTER. 3.
V iewing a JPEG files This unit can play JPEG files on CD-R/RW, DVD+R/RW, DVD-R/RW, DVD-RAM discs or Memory Card. Before playing JPEG recordings, read “About JPEG image files” on page 39. Photo menu options 1. Use v V b B to select a file then press ENTER. The menu options appear. 1. Use v V b B to select a file or folder and press ENTER. 2. Use v / V to select an option then press ENTER to confirm your selection. • [Open] Opens the folder and a list of files in the folder appears. 2.
About JPEG image files 1. Select [Slide Show] option on the Photo menu. JPEG disc compatibility with this recorder is limited as follows: 2. Press ENTER. 3. Use b / B / v / V to set the options. [Object] option: • [Selected] Views slide show only selected files. • Depending upon the size and number of JPEG files, it could take a long time for the recorder to read the files.
Recording About DVD recording Notes for recording Notes: • This Recorder cannot record CD-R or CD-RW discs. • The recording times shown are not exact because the recorder uses variable bit-rate video compression. This means that the exact recording time will depend on the material being recorded. • When recording a TV broadcast, if the reception is poor or the picture contains interference, the recording times may be shorter.
Basic Recording from a TV Instant T imer Recording Follow the instructions below to record a TV program. Recording starts immediately and continues until the disc or tape is full or you stop the recording. Instant Timer Recording allows you to make a recording easily of a preset length without using the program timer. 1. Switch on the Recorder, select the device (VCR or DVD) for Recording and load a recordable disc or tape. Also make sure that the TV input is set to this recorder. 1.
To record one TV program while watching another 1. Press TV/VCR to select the TV mode during recording. The TV indicator appears. 2. Using the TV, select the channel to be viewed. Tip (VCR mode only) Always use PAUSE/STEP (X) for best results when making changes during recording . For example: To change channels during recording, first press PAUSE/STEP (X) to put the unit in pause mode. Then select the desired channel on the Recorder, and press PAUSE/STEP (X) again to resume recording.
Timer Recording Troubleshooting Even though the timer is set, the recorder will not record when: Playing while you are recording RAM • There is no disc (or tape) loaded. • A non-recordable disc (or tape) is loaded. • Disc Protect is set to ON in the Disc menu (see page 26). While recording (in DVD mode) • There are already 99 titles (DVD-RW, DVD-R, DVD-RAM), 49 titles (DVD+RW, DVD+R(DL)) recorded on the disc. 1. Press N (PLAY). Start play of the title you are recording.
Dubbing from DVD to VCR Dubbing from VCR to DVD You can copy the contents of a DVD to a VHS tape using the DUBBING (or DUB) button. You can copy the contents of a VHS tape to a DVD using the DUBBING (DUB) button. This allows you to archive your old VHS tapes to DVD. 1. Insert a blank VHS videotape into the VCR deck. 2. Insert the disc you wish to copy in the DVD deck and close the disc tray. 1. Insert a blank DVD disc in the DVD deck and close the disc tray. 3.
Recording from External Components You can record from an external component, such as a camcorder or VCR, connected to any of the Recorder’s external inputs. 1. Make sure that the component you want to record from is connected properly to the Recorder. See page 18. 2. Press INPUT repeatedly to select the external input to record from. • AV1: Audio/Video Input mounted on back panel. • AV2: Audio/Video Input mounted on front panel. • DV: DV Input mounted on front panel.
Recording from DV Input 1. Make sure your digital camcorder is connected to the front panel DV IN jack. See page 18. Before DV dubbing 2. Check that the DV audio input is as you require. You can choose between Audio 1 (original audio) and Audio 2 (overdubbed audio). You can connect a DV-equipped camcorder to this recorder using a single DV cable for input and output of audio, video, data and control signals. This recorder is only compatible with DV-format (DVC-SD, DV25) camcorders.
Editing T itle List and Chapter List Menu Overview 123 4 5 67 Using the Title List menu you can edit video content. The editing features available in the Title List menu depend on whether you are editing video on DVD, and whether you’re editing Original content, or a Playlist. There are two ways to edit VR mode DVD-RW discs. You can directly edit the Original content of the disc, or you can create and edit a Playlist.
VR Mode: Original and Playlist Editing Titles, Chapters and Parts Titles in the disc’s original content contain one or more chapters. When you insert a disc’s title into the Playlist, all the chapters within that title also appear. In other words, chapters in the Playlist behave exactly as chapters on a DVD-Video disc do. Parts are sections of Original or Playlist titles. From the Original and Playlist menu you can add or delete parts.
Making a New Playlist -RWVR RAM Use this function to add an Original title or chapter to the Playlist. When you do this, the whole title is put into the Playlist (you can delete bits you don’t need later - see [Deleting an Original or Playlist title/chapter] on page 50). The title appears in the Playlist complete with the chapter markers that appear in the Original. However, if you add more chapter markers to the Original later, these are not automatically copied over into the Playlist title.
Deleting an Original or Playlist T itle/Chapter When you erase a title or chapter from the Playlist menu, you only remove it from the Playlist; the title/chapter remains in the Original menu. If you choose to delete a title or chapter from the Original (title/chapter) menu, the title or chapter is actually deleted from the disc and the remaining time available for recording increases. Titles/chapters deleted from the Original are also removed from the Playlist.
Naming a T itle 4. Choose [OK] then press ENTER to fix the name and return to the previous menu screen. You can name Original and Playlist titles independently. 5. Press RETURN (O) repeatedly to exit the menu. 1. Choose the title you want to name on the Title List menu, then press ENTER. The menu options appears on the left side of the menu. Notes: • Names can be up to 32 characters long. 2. Use v/V to select [Title Name] option then press ENTER. Keyboard menu appears.
Divide One T itle Into Two +RW Combining Two Chapters Into One -RWVR +RW +R RAM Use this command to split a title up into two new titles. Use this function to combine two adjacent chapters into one. 1. On the Title List menu, select a title you want to divide then press ENTER. The menu options appears on the left side of the screen. 1. On the Chapter List menu, select the second chapter of the two chapters you want to combine then press ENTER The menu options appears on the left side of the screen. 2.
Moving a Playlist Chapter -RWVR Use this function to re-arrange the playing order of Playlist chapters on the Chapter List-Playlist menu. Note: This function is not available if there is only one chapter. 1. Select a chapter on the Chapter List-Playlist menu. 2. Press ENTER. The menu options appears on the left side of the menu. 3. Use v / V to select [Move] option from Playlist options then press ENTER.
Overwriting Recording +RW 2. Press TITLE in Play mode or DVD tuner mode. Title List menu will appear as shown below. To overwrite a new video recording on a previously recorded title, follow these steps. This feature is not available for DVD+Rs, that always record at the end of the Disc. 1. Select input source you want to record (TV channel, AV1-2, DV). 2. Press LIST/DISC MENU to display the Title List menu. 3. To play back a title, select the title you want then press ENTER or N (PLAY).
Reference Controlling Your TV with the Supplied Remote You can control the sound level, input source, and power switch of your LG TV with the supplied remote. You can control your TV using the buttons below. By pressing You can POWER INPUT Turn the TV on or off. Switch the TV’s input source between the TV and other input sources. CH +/– Scans up or down through memorized channels. VOL +/– Adjust the volume of the TV. MUTE Turns on or off TV sound.
Language Code List Use this list to input your desired language for the following initial settings: Disc Audio, Disc Subtitle, Disc Menu.
Troubleshooting Check the following guide for the possible cause of a problem before contacting service. Cause Correction No power. The power cord is disconnected. Plug the power cord into the wall outlet securely. No picture. The TV is not set to receive Recorder signal output. Select the appropriate video input mode on the TV so the picture from the Recorder appears on the TV screen. The video cable is not connected securely. Connect the video cable into the jacks securely.
Symptom Correction No disc is inserted. No tape is inserted. Insert a disc or tape. (Check that the disc or tape indicator in the display window is lit.) An unplayable disc is inserted. Insert a playable disc. (Check the disc type and Regional code.) The disc is placed upside down. Place the disc with the playback side down. The disc is not placed within the guide. Place the disc on the disc tray correctly inside the guide. The disc is dirty. Clean the disc. The Rating level is set.
Picture or sound of broadcasting channel is weak or missing. Antenna or cables are loose. Tighten connections or replace cable. Wrong Tuning Band is selected in the Recorder Setup menu. Try [Tuning Band Select] options; see page 19 for details. Can’t play disc recorded on this Recorder on another DVD player. The disc was recorded in Video mode. Finalize the disc; see page 25. Some players will not play even a finalized disc recorded in Video mode. No solution. The disc was recorded in VR mode.
Specifications General Power requirements AC 120V, 60 Hz Power consumption 35W Dimensions (approx.) Mass (approx.) Operating temperature Operating humidity Signal system 430 X 78.5 X 354 mm (16.9 x 3.1 x 13.9 inches) (w x h x d) 6.8 kg (14.96 lbs) 5˚C to 35˚C (41˚F to 95˚F) 5 % to 90 % NTSC Recording Recording format DVD VideoRecording, DVD-VIDEO Recordable discs DVD-ReWritable, DVD-Recordable, DVD+ReWritable, DVD+Recordable (Double Layer), DVD-Random Access Memory DVD ; Approx.
DVD Specifications Laser system Semiconductor laser, wavelength 650 nm Frequency response DVD (PCM 48 kHz): 8 Hz to 22 kHz, CD: 8 Hz to 20 kHz Signal-to-noise ratio More than 95dB Harmonic distortion Less than 0.008% Dynamic range More than 90 dB Inputs ANTENNA IN VIDEO IN (AV1,2) AUDIO IN (AV1,2) S-VIDEO IN Antenna or CATV input, 75 ohms 1.0 Vp-p 75 ohms, sync negative, RCA jack x 2 -6 dBm more than 47 kohms, RCA jack (L, R) x 2 (Y) 1.0 V (p-p), 75 Ω, negative sync, Mini DIN 4-pin x 1 (C) 0.
LG Electronics, Inc. Limited Warranty - USA This LG Electronics product, will be repaired or replaced, at LG’s option, if it proves to be defective in material or workmanship, under normal use, during the warranty period (“Warranty Period”) listed below, effective from the date (“Date of Purchase”) of original consumer purchase of the product. This warranty is good only to the original purchaser of the product and effective only when used in the United States, excluding U.S. Territories.
