User manual

ENGLISH

Cooling

Healthy

Dehumidification

Auto

Heating

(Heat pump model only)

To raise the temperature

To lower the temperature

How to use the Operation Mode Selection button

Press the Start/Stop button.

The unit will respond with

a beep.

Open the door on the remote control. To select Cooling

Operation, press the Operation Mode Selection button.

Each time the button is pressed, the operation mode is

shifted in the direction of the arrow.

Close the door on the remote control. Set the temperature

lower than the room temperature. The temperature can be

set within a range of 18°C~30°C in 1°C increments.

Set the fan speed again with the door

of the remote control still closed. You

can select the fan speed in four steps-

low, medium, high, or CHAOS. Each

time the button is pressed, the fan

speed mode is shifted.

Cooling Operation

Natural wind by the CHAOS logic

❏ For more fresh feeling than other fan speed, press the Indoor Fan Speed Selector and set to

CHAOS mode. In this mode, the wind blows like natural breeze by automatically changing fan

speed according to the CHAOS logic.