ENGLISH Español OWNER’S MANUAL ELECTRIC RANGE Read this owner’s manual thoroughly before operating the appliance and keep it handy for reference at all times. LSE4613** LSE4611** MFL68881504_06 www.lg.
TABLE OF CONTENTS TABLE OF CONTENTS 3 IMPORTANT SAFETY INSTRUCTIONS 28 9 PRODUCT OVERVIEW 9 9 Parts Accessories 10 INSTALLATION 10 10 11 12 14 18 18 18 Installation Overview Product Specifications Before Installing the Range Installing the Range Connecting Electricity Engaging the Anti-tip Device Optional Rear Filler Test Run 19 OPERATION 19 20 21 25 Control Panel Overview Knob Positions Changing Oven Settings 21 Clock 21 Oven Light 21 Minimum & Maximum Default Settings 22 Timer On/Off 22 Settin
IMPORTANT SAFETY INSTRUCTIONS 3 Read and follow all instructions when using the range to prevent the risk of fire, electric shock, personal injury, or damage. This guide does not cover all possible conditions that may occur. Always contact your service agent or manufacturer about problems that you do not understand. Download this owner's manual at: http://www.lg.com This is the safety alert symbol.
IMPORTANT SAFETY INSTRUCTIONS SAFETY PRECAUTIONS Warning This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling. •• DO NOT TOUCH HEATING ELEMENTS OR INTERIOR SURFACES OF OVEN. Heating elements may be hot even though they are dark in color. Interior surfaces of an oven become hot enough to cause burns.
IMPORTANT SAFETY INSTRUCTIONS 5 Warning Be certain that all packing materials are removed from the appliance before operating. Keep plastic, clothes, paper, and other flammable materials away from parts of the appliance that may become hot. •• Do not store or use flammable material in the oven or near or on the cooktop. Flammable materials include paper, plastic, pot holders, linens, wall coverings, curtains, and gasoline or other flammable vapors and liquids such as grease or cooking oil.
IMPORTANT SAFETY INSTRUCTIONS CHILD SAFETY •• Do not touch the hot surface between the bottom of the oven door and the top of the drawer on the front of the oven while the oven is in operation. The surface becomes hot and can cause burns and other injury. •• Do not leave small children unattended near the oven. Warning Do not leave children alone or unsupervised near the appliance when it is in use or is still hot.
IMPORTANT SAFETY INSTRUCTIONS 7 ENERGY SAVING TIPS •• Multiple-rack cooking saves time and energy. Whenever possible, cook foods requiring the same cooking temperature together in one oven. •• For optimal performance and energy savings, follow the guides on page 30 for proper rack and pan placements. •• Match the size of the cookware to the amount of food being cooked to save energy when heating. Heating ½ quart of water requires more energy in a 3-quart pot than in a 1-quart pot.
IMPORTANT SAFETY INSTRUCTIONS •• Pull the oven rack to the stop-lock position when loading and unloading food from the oven. This helps prevent burns caused by touching hot surfaces of the door and oven walls. •• Do not use the oven if a heating element develops a glowing spot during use or shows other signs of damage. A glowing spot indicates the heating element may fail and present a potential burn, fire, or shock hazard.
PRODUCT OVERVIEW ENGLISH PRODUCT OVERVIEW Parts Glass-ceramic Cooktop Oven mode knob Cooktop controller Gasket Oven door Storage drawer Accessories Included Accessories Standard rack - LSE4613 (3ea) - LSE4611 (2ea) Cleaner Cleaning pad Cooktop cleaner (1ea) Cooktop cleaning pad (1ea) Spray bottle (1ea) Non-scratch scouring pad (1ea) Optional Accessories Grid 9 Broiler pan NOTE •• Contact LG Customer Service at 1-800-243-0000 (1-888-542-2623 in Canada) if any accessories are missing.
INSTALLATION INSTALLATION Installation Overview Please read the following installation instructions first after purchasing this product or transporting it to another location.
INSTALLATION 11 If you did not receive an anti-tip bracket with your purchase, call 1-800-243-0000 (1-888-542-2623 in CANADA) to receive one at no cost. Warning Warning Tip - Over Hazard •• The information in this manual should be followed exactly. Failure to do so may result in fire, electrical shock, property damage, personal injury, or death. A child or adult can tip the range and be killed. Verify the anti-tip bracket has been installed.
INSTALLATION Installing the Range Unpacking and Moving the Range CAUTION •• You should use two or more people to move and install the range. (Excessive Weight Hazard) Failure to do so can result in back or other injury. •• Do not use the door handles to push or pull the range during installation or when moving the range out for cleaning or service. Doing so can result in serious damage to the door of the range. Remove packing material, tape and any temporary labels from your range before using.
INSTALLATION 13 ENGLISH Dimensions and Clearances NOTE Save for the use of the local electrical inspector. 24" (60.9 cm) 3" (7.6 cm) Acceptable electrical outlet area Normal counter top depth Counter 36" (91.4 cm) top height A Cabinet opening Wall 24" (60.9 cm) 36" (91.4 cm) 3" (7.6 cm) 25" (63.5 cm) Center 15" (38 cm) Cabinet 11" (28 cm) 6" (15.2 cm) 29.8" (75.7 cm) 4" (10 cm) 9" (23 cm) 2.5" (6.3 cm) 5" (13 cm) 4" (10 cm) 6" (15.2 cm) 9" (23 cm) 2.5" (6.3 cm) A = 30" (76.2 cm) For U.
INSTALLATION Installing the Anti-tip Device Use a level to check your adjustments. Place the level diagonally on the oven rack, and check each direction for level. Warning Tip - Over Hazard First check direction . A child or adult can tip the range and be killed. Verify the anti-tip bracket has been installed. Ensure the anti-tip bracket is engaged when the range is moved. Do not operate the range without the anti-tip bracket in place.
INSTALLATION 15 •• Allow 2 to 3 ft (61.0 cm to 91.4 cm) of slack in the line so that the range can be moved if servicing is ever necessary. •• The power supply cord and plug should not be modified. If it will not fit the outlet, have a proper outlet Installed by a qualified electrician. Use the cord/conduit connection plate to install the power cord or conduit. Leave the connection plate as installed for power cord installations.
INSTALLATION 3-Wire Connection : Power Cord 4-Wire Connection : Power Cord Warning Warning •• The middle (neutral or ground) wire, which is white, of a 3-wire power cord or a 3-wire conduit has to be connected to the middle post of the main terminal block. The remaining two wires of the power cord or conduit have to be connected to the outside posts of the main terminal connection block. Failure to do so can result in electrical shock, severe personal injury or death.
INSTALLATION 17 4-Wire Connection: Conduit Install the conduit as follows: Remove the conduit connection plate from the rear of the oven and rotate it. The conduit hole (11/8") must be used. First, prepare the conduit wires as shown below. 3-Wire Conduit connection plate 4-Wire or Ground wire Second, install the conduit strain relief. For conduit installations, purchase a strain relief and insert it in the 11/8 in. (2.8 cm) conduit hole.
INSTALLATION Engaging the Anti-tip Device Installing the Rear Filler 1 •• Slide the range into position ensuring that the back leg slides under the anti-tip bracket. The range should sit flush against the back wall when properly installed. Using a screwdriver, remove the upper four screws that attach the rear bracket and loosen the lower two screws. 2 Place the rear filler on the rear bracket. •• Carefully attempt to tip the range forward to ensure that the anti-tip bracket is engaged properly.
OPERATION 19 ENGLISH OPERATION Control Panel Overview For Model : LSE4613 1 2 For Model : LSE4611 3 4 5 6 7 8 9 10 11 1 Smart DiagnosisTM Use during the Smart Diagnosis feature. 2 Smart Features The Tag On icon, for use with Smart Features. 3 Cook Time Press the button to set the desired amount of time for food to cook. The oven shuts off when the set cooking time runs out. 4 Start Time Press the button to set the delayed timed cook. The oven starts at the set time.
OPERATION Knob Positions After cleaning the oven knobs, make sure to replace each knob in the correct position. Failure to do so can result in improper operation of the burners.
OPERATION 21 Clock The clock must be set to the correct time of day in order for the automatic oven timing functions to work properly. 1 Set the oven mode knob to the Off position. 2 Press Clock. CLO shows in the display. 3 Press plus(+) or minus(-) to select the desired time. Plus(+) to increase the time and minus(-) to decrease the time. 4 Press Start to enter the time and start the clock.
OPERATION Timer On/Off Settings The Timer On/Off serves as an extra timer in the kitchen that beeps when the set time has run out. It does not start or stop cooking. Set the oven mode knob to the Off position. Press Setting key repeatedly to toggle through and change oven settings. The Timer On/Off feature can be used during any of the oven control functions.
OPERATION 23 Adjusting the Beeper Volume Your new oven may cook differently from the one it replaced. Use your new oven for a few weeks to become more familiar with it before changing the temperature settings. If after familiarizing yourself with the new oven, you still think that it is too hot or too cold, you can adjust the oven temperature yourself. 1 2 Set the oven mode knob to the Off position. 3 Press plus(+) or minus(-) to select the desired volume.
OPERATION Start Time (Delayed Timed Cook) Cook Time (Timed Cook) The automatic timer of the Delayed Timed Cook function turns the oven on and off at the time you select. This feature can be used with the Bake, Conv. Bake and Conv. Roast modes. Set the oven to cook for a specific length of time using the Timed Cook feature. This feature can only be used with the Bake, Conv. Bake and Conv. Roast modes.
OPERATION 25 Using the Cooktop Elements CAUTION Cooking Areas The cooking areas on your range are identified by permanent circles on the glass cooktop surface. For the most efficient cooking, fit the pan size to the element size. Pans should not extend more than 1/2 to 1-inch beyond the cooking area. When a control is turned on, a glow can be seen through the glass cooktop surface. The element cycles on and off to maintain the preset heat setting, even on Hi.
OPERATION Turning on the Dual element Turning on a Warming Zone element There is one dual element located in the left front position. Use the dual element as a dual or single element. 1 Push the Warming Zone element knob in. 2 Turn the knob in either direction to the desired setting. The control knob clicks when it is positioned at both Off and Hi. 1 Push in the appropriate knob. 2-A Turn the knob counterclockwise to use it as a Single element.
OPERATION 27 Choosing Cookware The size and type of cookware will influence the settings needed for the best cooking results. Be sure to follow the recommendations for using proper cookware. The cookware material determines how evenly and quickly heat is transferred from the surface element to the pan bottom. The most popular materials available are: Cookware should have flat bottoms that make good contact with the entire surface heating element.
OPERATION Using the Oven Using Oven Racks The racks have a turned-up back edge that prevents them from being pulled out of the oven cavity. Before Using the Oven NOTE •• Because the oven temperature cycles, an oven thermometer placed in the oven cavity may not show the same temperature that is set on the oven. •• It is normal for the convection fan to run while preheating during a regular bake cycle. •• The convection fan motor may run periodically during a regular bake cycle.
OPERATION 29 Tips for Convection Baking •• Baking time and temperature will vary depending on the characteristics, size, and shape of the baking pan used. •• Use Convection Bake for faster and more even multiple-rack cooking of pastries, cookies, muffins, biscuits, and breads of all kinds. •• Check for food doneness at the minimum recipe time. •• Bake cookies and biscuits on pans with no sides or very low sides to allow heated air to circulate around the food.
OPERATION Recommended Baking and Roasting Guide Baking results will be better if baking pans are centered in the oven as much as possible. If cooking on multiple racks, place the oven racks in the positions shown.
OPERATION 31 Smoking The Broil function uses intense heat from the upper heating element to cook food. Broiling works best for tender cuts of meat, fish, and thinly cut vegetables. Some models may feature a hybrid broiler consisting of an inner broiler that utilizes a carbon heating element which provides instantaneous heat, and a traditional outer broiling element. During normal broiler operation, it is normal for either element to cycle off intermittently.
OPERATION Recommended Broiling Guide The size, weight, thickness, starting temperature, and your preference of doneness will affect broiling times. This guide is based on meats at refrigerator temperature. For best results when broiling, use a pan designed for broiling. Food Quantity and/or Thickness Rack First Side Position (minutes) Second Side (minutes) Ground Beef Well done 1 lb. (4 patties) 1/2 to 3/4" thick 7 3-6 2-4 Beef Steaks Rare Medium Well done 1" thick 1 to 11/2 lbs.
OPERATION 33 Beef •• Steaks and chops should always be allowed to rest for five minutes before being cut into and eaten. This allows the heat to distribute evenly through the food and creates a more tender and juicy result. •• Pieces of meat that are thicker than two inches should be removed from the refrigerator 30 minutes prior to cooking. This will help them cook more quickly and evenly, and will produce less smoke when broiling.
OPERATION Pizza (For Model : LSE4611) Speed Roast The Pizza function is specially designed for cooking pizza. It heats from both the top and bottom to brown food more evenly. The Speed Roast feature is designed to quickly roast poultry. The combination of intense heat from the upper heating element and heated air from the back heating element result in crispier food and help to save cooking time. Speed roasting is especially good for medium sized poultry.
SMART FEATURES 35 3 Check Use Read and Write/P2P receive. Before Using Tag On The Tag On function allows you to conveniently use LG Smart Diagnosis™, set the cook mode and EasyClean® features, and communicate with your appliance using a smart phone. To use the Tag On function: 1 Download the LG Smart Oven application(Smart ThinQ) to a smart phone. 2 Turn on the NFC (Near Field Communication) function in the smart phone.
SMART FEATURES The NFC Antenna Position When using the Tag On function, position the smart phone so that the NFC antenna inside the back of the smart phone matches the position of the Tag On icon on the appliance. If the application is not able to show a target range, position the center back of the smart phone over the Tag On icon on the appliance. If the connection is not made immediately, move the smart phone very slightly in a widening circular motion until the application verifies the connection.
MAINTENANCE 37 Cleaning the Glass-Ceramic Cooktop Burned-On Residue 1 CAUTION While the cooktop is still hot, remove any burnt on deposits or spilled food from the glass-ceramic cooking surface with a suitable metal razor scraper. (Similar to scraping paint off of a windowpane, it will not damage the decorated cooking surface.) Hold the scraper at an approximate 30° angle to the cooktop. •• Do not use scrub pads or abrasive cleaning pads. They may damage your cooktop surface.
MAINTENANCE Metal Marks and Scratches 1 Be careful not to slide pots and pans across the cooktop. Doing so will leave metal markings on the cooktop surface. To help remove these marks, use a ceramic cooktop cleaner with a cleaning pad for ceramic cooktops. 2 If pots with a thin overlay of aluminum or copper are allowed to boil dry, the overlay may leave black discoloration on the cooktop. This should be removed immediately before heating again or the discoloration may be permanent.
MAINTENANCE 39 Suggested Cleaning Method Example of Oven Soiling Soil Pattern Types of Soils Common Food Items That Can Soil Your Oven Small drops or spots Cheese or other ingredients Pizza Steaks, broiled EasyClean® Self Clean* (For Model : LSE4613) Fish, broiled Light splatter Fat/grease Medium to heavy splatter Fat/grease Meat roasted at high temperatures Filling or sugar based soils Pies Cream or tomato sauce Casseroles Drops or spots Meat roasted at low temperatures * The Self Cl
MAINTENANCE 5 Spray or pour the remaining 1 cup (8 oz or 250 ml) of water onto the bottom center of the oven cavity. The indentation on the oven bottom should be fully covered to submerge all soils. Add water if necessary. NOTE Use the "mist" setting on the spray bottle for better coverage. The entire 1¼ cup (10 oz or 300 ml) of water should be used for each oven cavity cleaned. Do not spray water directly on the door. Doing so will result in water dripping to the floor. 6 Close the oven door.
MAINTENANCE 41 The Self Clean cycle uses extremely hot temperatures to clean the oven cavity. While running the Self Clean cycle, you may notice smoking or an odor. This is normal; especially if the oven is heavily soiled. During Self Clean, the kitchen should be well ventilated to minimize the odors from cleaning. Before Starting Self Clean During the Self Clean cycle, the cooktop elements and warming drawer cannot be used. NOTE •• Remove oven racks and accessories before starting the Self Clean cycle.
MAINTENANCE CAUTION Do not force the oven door open when the lock icon is displayed. The oven door remains locked until the oven temperature has cooled. Forcing the door open will damage the door. Setting Self Clean with a Delayed Start 1 Remove all racks and accessories from the oven. 2 Turn the oven mode knob to select Self Clean. The oven defaults to the recommended four-hour self clean for a moderately soiled oven. Press plus(+) or minus(-) to select a self clean time from 3 to 5 hours.
MAINTENANCE 43 Cleaning the Exterior The oven light is a standard 40-watt appliance bulb. It turns on when the oven door is open. When the oven door is closed, press Light to turn it on or off. Painted and Decorative Trim For general cleaning, use a cloth with hot soapy water. For more difficult soils and built-up grease, apply a liquid detergent directly onto the soil. Leave it on for 30 to 60 minutes. Rinse with a damp cloth and dry. Do not use abrasive cleaners.
MAINTENANCE Broiler Pan and Grid •• Do not store a soiled broiler pan or grid anywhere in the range. •• Do not clean the broiler pan or grid in a self-cleaning mode. (For Model : LSE4613) •• Remove the grid from the pan. Carefully pour out the grease from the pan into a proper container. •• Wash and rinse the broiler pan and grid in hot water with a soap-filled or plastic scouring pad. •• If food has burned on, sprinkle the grid with cleaner while hot and cover with wet paper towels or a dishcloth.
MAINTENANCE 45 1 2 Removing the Drawer Firmly grasp both sides of the door at the top. With the door at the same angle as the removal position, seat the indentation of the hinge arms into the bottom edge of the hinge slots. The notch in the hinge arms must be fully seated into the bottom edge of the slots. Hinge arm Bottom edge of slot CAUTION Disconnect the electrical power to the range at the main fuse or circuit breaker panel.
TROUBLESHOOTING TROUBLESHOOTING Can I use aluminum foil to catch drippings in my oven cavity? FAQs Never use aluminum foil to line the bottom or sides of the oven. The foil will melt and stick to the bottom surface of the oven and will not be removable. Use a sheet pan placed on a lower oven rack to catch drippings instead. (If foil has already melted onto the bottom of the oven, it will not interfere with the oven's performance.
TROUBLESHOOTING 47 Make sure that the range is not in Lockout mode. will show in the display if Lockout is The lock activated. To deactivate Lockout, pressing Clock for three seconds. The unlock melody sounds and Loc appears in the display until the controls are unlocked. My range is still dirty after running the EasyClean® cycle. What else should I do? The EasyClean® cycle only helps to loosen light soils in your oven range to assist in hand-cleaning of your oven.
TROUBLESHOOTING Before Calling for Service Before you call for service, review this list. It may save you time and expense. The list includes common occurrences that are not the result of defective workmanship or materials in this appliance. Symptoms Possible Causes / Solutions •• Poor installation. Place oven rack in center of oven. Place a level on the oven rack. Adjust leveling legs at base of range until the oven rack is level. Range is not level.
TROUBLESHOOTING 49 Possible Causes / Solutions •• Plug on range is not completely inserted in the electrical outlet. - Make sure electrical plug is plugged into a live, properly grounded outlet. •• A fuse in your home may be blown or the circuit breaker tripped. Oven will not work - Replace the fuse or reset the circuit breaker. •• Oven controls improperly set. - See the Using the Oven section. •• Oven too hot. - Allow the oven to cool to below locking temperature.
TROUBLESHOOTING Symptoms Possible Causes / Solutions •• Aluminum foil used on the broiling pan and grid has not been fitted properly and slit as recommended. Food does not broil properly - See the Using the Oven section. •• In some areas the power voltage may be low. - Preheat the broil element for 5-7 minutes. - See the Broiling Guide. Oven temperature too hot or too cold Scratches or abrasions on cooktop surface •• Oven sensor needs to be adjusted.
TROUBLESHOOTING 51 Possible Causes / Solutions ENGLISH Symptoms •• Oven is too hot. Oven door does not open after a Self Clean cycle * - Allow the oven to cool below locking temperature. •• Allow about one hour for the oven to cool after the completion of a Self Clean cycle. The door can be opened when the lock is no longer displayed. •• The control and door may be locked. •• Oven controls not properly set. The oven does not clean after a Self Clean cycle * - See the Self Clean section.
SMART DIAGNOSIS™ SMART DIAGNOSIS™ Should you experience any problems with your range, it has the capability of transmitting data to your smart phone using the LG Smart Oven application or via your telephone to the LG call center. Smart Diagnosis™ cannot be activated unless your range is turned on by pressing the Start button. If your range is unable to turn on, then troubleshooting must be done without using Smart Diagnosis™.
WARRANTY 53 Should your LG Electric Range fail due to a defect in materials or workmanship under normal home use, during the warranty period set forth below, LG will at its option repair or replace the product. This limited warranty is valid only to the original retail purchaser of the product and applies only when purchased and used within the United States including U.S. Territories. Proof of original retail purchase is required to obtain warranty service under this limited warranty.
WARRANTY •• The removal and reinstallation of the Product if it is installed in an inaccessible location or is not installed in accordance with published installation instructions, including LG’s owner’s and installation manuals. •• Damage resulting from misuse, abuse, improper installation, repair, or maintenance. Improper repair includes use of parts not approved or specified by LG.
WARRANTY 55 Cause Prevention •• Surface is not level 1. Range not leveled •• Oven is tipping 2. Anti-tip device not installed correctly Level both sides of range Approximately 0.65" (16.5 mm) •• Check with installer first Anti-tip bracket Screw must enter wood or concrete Wall plate Use carpenter’s level to check level. 2 1 The cost of repair or replacement under these excluded circumstances shall be borne by the consumer.
MEMO MEMO
Español MANUAL DEL PROPIETARIO COCINA ELÉCTRICA Lea detenidamente el manual del propietario antes de poner el aparto en funcionamiento y consérvelo a mano en todo momento para su referencia. LSE4613** LSE4611** MFL68881504_06 www.lg.
2 ÍNDICE ÍNDICE 3 INSTRUCCIONES IMPORTANTES 25 26 DE SEGURIDAD 9 DESCRIPCIÓN GENERAL DEL PRODUCTO 9 9 Piezas Accesorios 28 10 INSTALACIÓN 10 10 11 12 14 18 18 18 Descripción general de la instalación Especificaciones del producto Antes de instalar la cocina Instalación de la cocina Conexión de la electricidad Colocación del dispositivo antivuelco Relleno trasero opcional Prueba de funcionamiento 19 FUNCIONAMIENTO 19 20 21 25 Descripción general del panel de control Posición de la perilla Cambio
INSTRUCCIONES IMPORTANTES DE SEGURIDAD 3 INSTRUCCIONES IMPORTANTES DE SEGURIDAD Descargue este manual del propietario en: http://www.lg.com Este es el símbolo de alerta de seguridad. Este símbolo le advierte sobre posibles riesgos que pueden ocasionar daños materiales, lesiones personales graves o la muerte. El símbolo de alerta de seguridad siempre estará acompañado de las palabras "ADVERTENCIA" o "PRECAUCIÓN".
4 INSTRUCCIONES IMPORTANTES DE SEGURIDAD PRECAUCIONES DE SEGURIDAD Advertencia Este producto contiene quimicos conocidos por el Estado de California de causar cáncer y defectos de nacimiento u otros daños reproductivos. Lávese las manos después de manipular. •• NO TOQUE LAS HORNALLAS NI LAS SUPERFICIES INTERIORES DEL HORNO. Las hornallas podrían estar calientes incluso cuando presenten un color oscuro. Las superficies interiores del horno se calientan lo suficiente como para causar quemaduras.
INSTRUCCIONES IMPORTANTES DE SEGURIDAD 5 MATERIALES INFLAMABLES Advertencia •• No almacene ni utilice material inflamable en el horno ni cerca de la placa de cocción. Los materiales inflamables incluyen papel, plástico, agarraderas, telas, recubrimientos para paredes, cortinas y gasolina u otros vapores inflamables y líquidos como grasa o aceite de cocina. Estos materiales pueden prenderse fuego cuando el horno y la placa de cocción están en uso. •• Use vestimenta adecuada.
6 INSTRUCCIONES IMPORTANTES DE SEGURIDAD SEGURIDAD DE LOS NIÑOS •• No toque la superficie caliente entre la parte inferior de la puerta del horno y la parte superior del cajón, en el frente del horno, mientras está en funcionamiento. La superficie se calienta y puede causar quemaduras y otras lesiones. •• No deje a los niños sin supervisión cerca del horno. Advertencia No deje solos a los niños o sin supervisión cerca del electrodoméstico cuando está en funcionamiento o aún caliente.
INSTRUCCIONES IMPORTANTES DE SEGURIDAD 7 SUGERENCIAS PARA AHORRAR ENERGÍA •• Cocinar en varios estantes ahorra tiempo y energía. Siempre que sea posible, cocine alimentos que requieran la misma temperatura de cocción en un único horno. •• Para un desempeño óptimo y ahorro de energía, siga las pautas de la página 30 para colocar correctamente los estantes y las bandejas.
8 INSTRUCCIONES IMPORTANTES DE SEGURIDAD •• No utilice agua para apagar incendios provocados por grasa. Si se produce un incendio en el horno, mantenga la puerta del horno cerrada y apague el horno. Si el fuego continúa, arroje bicarbonato de sodio sobre el fuego o utilice un extinguidor. No arroje agua ni harina sobre el fuego. La harina podría ser explosiva y el agua podría hacer que un incendio causado por grasa se propague y genere lesiones personales.
DESCRIPCIÓN GENERAL DEL PRODUCTO 9 DESCRIPCIÓN GENERAL DEL PRODUCTO Piezas Perilla de modo del horno Controlador de la placa de cocción Junta Puerta del horno Cajón de almacenamiento Accesorios Accesorios incluidos Limpiador Estante estándar - LSE4613 (3 c/u) - LSE4611 (2 c/u) Limpiador para placa de cocción (1 c/u) Esponja limpiadora Esponja limpiadora para placa de cocción (1 c/u) Botella rociadora (1 c/u) Esponja limpiadora que no raya (1 c/u) Accesorios opcionales Rejilla Asadera NOTA •
10 INSTALACIÓN INSTALACIÓN Descripción general de la instalación Lea las siguientes instrucciones de instalación en primer lugar, después de comprar este producto o transportarlo a otra ubicación.
INSTALACIÓN 11 Antes de instalar la cocina Advertencia Si no recibió un soporte antivuelco con su compra, llame al 1-800-243-0000 (1-888-542-2623 en Canadá) para recibir uno sin costo. Advertencia Riesgo de vuelco Para verificar que se haya insertado la pata de nivelación en el soporte antivuelco, sujete el borde superior trasero de la cocina e intente inclinarla, con Soporte antivuelco cuidado. •• Debe seguir con exactitud la información de este manual.
12 INSTALACIÓN Instalación de la cocina Desembalaje y traslado de la cocina PRECAUCIÓN •• Debe haber dos o más personas para mover e instalar la cocina. (Peligro de peso excesivo) Si no se cumple con esto, se pueden producir lesiones en la espalda u otras lesiones. •• No utilice las manijas de la puerta para empujar ni para tirar de la cocina durante la instalación o al mover la cocina para tareas de limpieza o reparaciones. Hacerlo podría causar daños graves a la puerta de la cocina.
INSTALACIÓN 13 Dimensiones y espacios libres NOTA Guarde para el uso del inspector eléctrico local.
14 INSTALACIÓN Instalación del dispositivo antivuelco Advertencia Utilice un nivelador para verificar sus ajustes. Ubique el nivelador en diagonal sobre el estante el horno y verifique en todas direcciones para nivelar. Riesgo de vuelco Primero verifique la dirección Es posible que un niño o un adulto inclinen la cocina y el vuelco consecuente les produzca la muerte. Verifique que se haya instalado el soporte antivuelco. Asegúrese de que el soporte antivuelco esté conectado cuando se mueva la cocina.
INSTALACIÓN 15 Advertencia •• Deje de 2 a 3 pies (61,0 cm a 91,4 cm) de lugar libre en la línea, para que se pueda mover la cocina si es necesario hacer reparaciones. •• Se prohíbe utilizar un cable de extensión para conectar la cocina a la energía eléctrica. Conecte el cable de alimentación y el enchufe directamente. •• Se requiere una conexión eléctrica a tierra en este electrodoméstico. •• Asegúrese de que el cable de alimentación no esté presionado por la cocina ni por objetos pesados.
16 INSTALACIÓN Conexión con cable de 3 hilos: Cable de alimentación Advertencia •• El hilo del medio (neutro o tierra), que es blanco, de un cable de alimentación de 3 hilos o un conducto de 3 hilos se debe conectar al poste medio del bloque de bornes principal. Los dos hilos restantes del cable de alimentación o del conducto se deben conectar a los postes exteriores del bloque de bornes principal. El no hacerlo podría causar lesiones personales graves, descargas eléctricas o la muerte.
INSTALACIÓN 17 Conexión con cable de 3 hilos: Conducto Conexión con cable de 4 hilos: Conducto Instale el conducto de la siguiente manera: En primer lugar, prepare los hilos del conducto como se indica a continuación. 3 hilos 1" (2,5 cm) Placa de conexión del conducto 4 hilos 31/2" (8,9 cm) 3/8" 1" (2,5 cm) (0,9 cm) 3/8" (0,9 cm) 31/2" (8,9 cm) 3/4" (1,9 cm) o Cable de conexión a tierra 23/4" (6,9 cm) En segundo lugar, instale el pasacables del conducto.
18 INSTALACIÓN Colocación del dispositivo antivuelco •• Mueva la cocina para que quede cerca de la abertura para enchufar en el receptáculo. •• Deslice la cocina en su posición y asegúrese de que la pata trasera se deslice por debajo del soporte antivuelco. La cocina debe quedar bien apoyada contra la pared trasera, cuando está bien instalada. •• Con cuidado, intente inclinar la cocina hacia delante para asegurarse de que el soporte antivuelco esté colocado correctamente.
FUNCIONAMIENTO 19 FUNCIONAMIENTO Descripción general del panel de control Para los modelos : LSE4613 Español 1 2 Para los modelos : LSE4611 3 4 5 6 7 8 9 10 11 1 Smart DiagnosisTM Uso durante la función Smart Diagnosis. 2 Funciones inteligentes El icono de Tag On, para uso con las funciones inteligentes. 3 Cook Time (Tiempo de cocción) Presione el botón para configurar la cantidad de tiempo que se desea cocinar la comida. El horno se apaga cuando se agota el tiempo de cocción establecido.
20 FUNCIONAMIENTO Posición de la perilla Después de limpiar las perillas del horno, asegúrese de volver a colocarlas en la posición correcta; de lo contrario podría ocasionar un mal funcionamiento de los quemadores.
FUNCIONAMIENTO 21 Cambio de las configuraciones del horno Clock (Reloj) 1 Coloque la perilla de modo del horno en la posición Off. 2 Presione Clock. CLO se muestra en la pantalla. 3 Presione los botones más(+) o menos(-) para seleccionar la hora deseada. Más(+) para incrementar el tiempo y menos(-) para disminuir el tiempo. 4 Presione Start para introducir la hora e iniciar el reloj.
22 FUNCIONAMIENTO Timer On/Off (Temporizador encendido/apagado) La función Temporizador encendido/apagado sirve de temporizador adicional en la cocina y emite un tono cuando el tiempo configurado se ha agotado. No inicia ni detiene la cocción. La función Temporizador encendido/apagado se puede utilizar durante cualquiera de las funciones de control del horno. Configuración de la Temporizador (por ejemplo para 5 minutos) Settings (Ajustes) Coloque la perilla de modo del horno en la posición Off.
FUNCIONAMIENTO 23 Ajuste de temperatura del horno Ajuste del volumen del indicador sonoro El horno nuevo podría cocinar de manera diferente a su horno anterior. Use el horno nuevo durante algunas semanas para familiarizarse con él antes de cambiar los ajustes de temperatura. Si, después de familiarizarse con el horno, sigue pensando que la temperatura es muy alta o muy baja puede ajustarla. 1 2 Coloque la perilla de modo del horno en la posición Off.
24 FUNCIONAMIENTO Start Time [Hora de inicio] (Delayed Timed Cook [Cocción temporizada retardada]) El temporizador automático de la función Cocción temporizada retardada enciende y apaga el horno a la hora que usted seleccione. Esta función puede usarse junto con los modos Bake, Conv. Bake y Conv. Roast.
FUNCIONAMIENTO 25 Uso de la placa de cocción Áreas de cocción La batería de cocina no deben extenderse más de 1/2 a 1 pulgada del área de cocción. Cuando se enciende un control, se produce un brillo visible a través de la superficie de vidrio de la placa de cocción. La hornalla se enciende y apaga para mantener la configuración preestablecida de calor, incluso en modo Hi.
26 FUNCIONAMIENTO Encendimiento de una hormalla doble En la posición frontal izquierda encontrará una hornalla doble. Utilice la hornalla doble como tal o como una hornalla simple. 1 Empuje hacia dentro la perilla correspondiente. 2-A Gire la perilla en sentido contrario a las agujas del reloj para usarla como hornalla simple. 2-B Gire la perilla en sentido de las agujas del reloj para usarla como hornalla doble. e bl Do 1 Empuje hacia adentro la perilla del elemento de la Zona de calentamiento.
FUNCIONAMIENTO 27 Uso de batería de cocina adecuada Elección de la batería de cocina El tamaño y tipo de batería de cocina influye en los ajustes necesarios para obtener resultados óptimos de cocción. Asegúrese de seguir las recomendaciones para utilizar la batería de cocina adecuada. El material de la batería de cocina determina la uniformidad y la rapidez en que se transfiere el calor de la hornalla al fondo del recipiente.
28 FUNCIONAMIENTO Uso del horno Uso de los estantes del horno Los estantes tienen un borde posterior doblado hacia arriba que evita que salgan de la cavidad del horno. Antes de usar el horno NOTA Extracción de los estantes •• Como la temperatura del horno es cíclica, el termómetro que esté dentro de la cavidad del horno podría no indicar la misma temperatura que está configurada. •• Es normal que el ventilador de convección funcione durante el precalentamiento en un ciclo normal de horneado.
FUNCIONAMIENTO 29 Sugerencias para hornear por convección •• El tiempo y la temperatura de horneado variarán según las características, el tamaño y la forma del recipiente que se utilice para hornear. •• Use el horneado por convección para cocinar más rápido y de manera más pareja en varios estantes: pasteles, galletas, muffins, bizcochos y panes de todo tipo. •• Verifique el punto de cocción de los alimentos en el tiempo mínimo de la receta.
30 FUNCIONAMIENTO Guía de recomendaciones para hornear y rostizar Los resultados del horneado serán mejores si las bandejas están centradas en el horno lo mejor posible. Si se cocina en varios estantes del horno, colóquelos en la posición que se ilustra.
FUNCIONAMIENTO 31 Broil (Asar) La función Asar utiliza el calor intenso de los quemadores superiores para cocinar la comida. Este método de cocción es ideal para cortes de carne tiernos, pescados y verduras finamente cortadas. PRECAUCIÓN •• No utilice una asadera sin rejilla. El aceite puede provocar un incendio causado por grasa. •• No cubra la rejilla ni la asadera con papel de aluminio. Si lo hace, se prenderá fuego. •• Siempre use una asadera con rejilla para drenar el exceso de grasa.
32 FUNCIONAMIENTO Guía de recomendaciones para asar El tamaño, el peso, el espesor, la temperatura inicial y su preferencia de cocción afectarán el tiempo de asado. Esta guía se basa en carnes a temperatura de refrigerador. Para obtener mejores resultados al asar, use una bandeja especial para asar.
FUNCIONAMIENTO 33 Consejos para asar Filete •• Los bistecs y las chuletas siempre se deben dejar reposar durante cinco minutos antes de cortarlos y comerlos. Esto permite que el calor se distribuya uniformemente en el alimento y resulta más tierno y jugoso. •• En el caso de bistecs con hueso o chuletas cortadas a la francesa (se retira toda la carne alrededor del hueso), envuelva las partes expuestas del hueso en papel de aluminio para que no se quemen demasiado.
34 FUNCIONAMIENTO Pizza (Pizza) (Para los modelos : LSE4611) Speed Roast (Rostizado rápido) La función Pizza está diseñada especialmente para cocinar esta comida. Calienta tanto de arriba como de abajo para dorar la comida de manera más pareja. Este sistema está hecho para dar la mejor cocción para la pizza, ya que selecciona automáticamente una combinación de los sistemas calentadores de horneado y para asar. Si usa las funciones P1 y P2, no hay necesidad de precalentar el horno antes de cocinar.
FUNCIONES INTELIGENTES 35 FUNCIONES INTELIGENTES 3 Marque Use Read and Write/P2P receive. Antes de usar Tag On Español La función Tag On le permite usar convenientemente la función LG Smart Diagnosis™, configurar el modo de cocción y las funciones EasyClean® y comunicarse con el electrodoméstico a través de un teléfono inteligente. Para usar la función Tag On: 1 Descargue la aplicación LG Smart Oven(Smart ThinQ) (Horno inteligente de LG) en un teléfono inteligente.
36 FUNCIONES INTELIGENTES Posición de la antena de NFC Cuando utilice la función Tag On, ubique el teléfono de manera de que la antena de NFC, que se encuentra dentro de la parte posterior de su teléfono, coincida con la posición del icono de Tag On en el aparato. Si la aplicación no puede mostrar un alcance objetivo, coloque la parte trasera central del teléfono sobre el icono Tag On del aparato.
MANTENIMIENTO 37 MANTENIMIENTO Limpieza de la placa de cocción de vitrocerámica Residuo quemado 1 •• Por su seguridad, póngase un guante para horno o una agarradera cuando use una espátula en la superficie de cocción caliente. •• Lea y siga las instrucciones y advertencias de la etiqueta de la crema de limpieza. Use limpiador para placas de cocción cerámicas en la superficie de vidrio. Otras cremas podrían no resultar eficaces o podrían rayar, dañar o manchar la superficie de la placa de cocción.
38 MANTENIMIENTO Rayas y marcas del metal 1 Tenga cuidado de no deslizar las ollas ni las sartenes por la placa de cocción. Si lo hace, el metal dejará marcas en la superficie. Para quitar esas marcas, use limpiador para placas de cocción cerámicas con una esponja para placas de cerámica. 2 Si se deja evaporar toda el agua en ollas con una capa delgada de aluminio o cobre, dicha capa puede dejar una coloración negra en la superficie de la placa de cocción.
MANTENIMIENTO 39 Cuándo usar EasyClean® Método sugerido de limpieza Ejemplo de suciedad en el horno Forma de la suciedad Tipos de suciedad Alimentos comunes que pueden ensuciar el horno Gotitas o manchitas Queso u otros ingredientes Pizza Self Clean* (Autolimpieza) (Para los modelos : LSE4613) Pescado, asado Salpicadura leve Grasa/aceite Salpicadura mediana a grande Grasa/aceite Carne rostizada a alta temperatura Relleno o suciedad de alimentos con azúcar Tartas Crema o salsa de tomate Es
40 MANTENIMIENTO 5 Rocíe o vierta la taza restante (8 oz o 250 ml) de agua en el centro de la base de la cavidad del horno. La hendidura en la base del horno debe estar totalmente cubierta para sumergir toda la suciedad. Agregue agua si fuera necesario. NOTA Use el ajuste de "niebla" del envase rociador para lograr una mayor cobertura. Se debe usar toda el agua (1¼ tazas, 10 oz o 300 ml) para cada cavidad del horno que se limpie. No rocíe agua directamente en la puerta.
MANTENIMIENTO 41 Self Clean (Autolimpieza) (Para los modelos : LSE4613) Durante el ciclo de Autolimpieza, se debe ventilar bien la cocina para minimizar los olores de la limpieza. Antes de comenzar la autolimpieza •• Quite los estantes del horno, la asadera, la rejilla de la asadera, cualquier recipiente, el papel aluminio y cualquier otro material del horno. •• La cocina debe estar bien ventilada para minimizar los olores de la limpieza.
42 MANTENIMIENTO PRECAUCIÓN No fuerce la puerta del horno para abrirla cuando vea el icono del candado. La puerta permanece trabada hasta que baja la temperatura del horno. Si abre la puerta a la fuerza, se dañará. Configuración de Autolimpieza con inicio retardado 1 Quite todos los estantes y los accesorios del horno. 2 Gire la perilla de modo del horno hasta seleccionar el modo Self Clean.
MANTENIMIENTO 43 Cambio de la luz del horno Limpieza del exterior La luz del horno es una bombilla estándar para electrodomésticos de 40 vatios. Se enciende cuando se abre la puerta del horno. Cuando la puerta del horno está cerrada, presione el botón Light para encenderla o apagarla. Reborde decorativo y pintado Desenchufe la cocina o desconecte la electricidad. 2 Para quitar la tapa de vidrio de la bombilla, que se encuentra en la parte trasera del horno, gírela hacia la izquierda.
44 MANTENIMIENTO Asadera y rejilla Remoción y reemplazo de la puertas removible del horno y el cajón PRECAUCIÓN •• No guarde asaderas ni rejillas sucias en ninguna parte de la cocina. •• Tenga cuidado cuando quite y levante la puerta. •• No limpie la asadera ni la rejilla en el modo de autolimpieza. (Para los modelos : LSE4613) •• No levante la puerta de la manija. La puerta es muy pesada. •• Quite la rejilla de la asadera. Vierta cuidadosamente la grasa de la asadera en un recipiente adecuado.
MANTENIMIENTO 45 Colocación de la puerta Remoción del cajón Tome firmemente ambos lados de la puerta desde la parte superior. 2 Con la puerta en el mismo ángulo que la posición de remoción, apoye la hendidura de los brazos de las bisagras en el borde inferior de las ranuras de las bisagras. Las muescas de los brazos de las bisagras deben estar totalmente apoyadas en el borde inferior de las ranuras.
46 SOLUCIÓN DE PROBLEMAS SOLUCIÓN DE PROBLEMAS PREGUNTAS FRECUENTES ¿Qué tipo de batería de cocina se recomienda para usar con la placa de cocción? ¿Puedo usar papel de aluminio para que recolecte las gotas en la cavidad del horno? Nunca utilice papel de aluminio para revestir la base o los costados del horno. El papel se derretirá y se pegará a la superficie del fondo del horno y no se podrá quitar.
SOLUCIÓN DE PROBLEMAS 47 ¿Por qué no funcionan los botones de función? Mi cocina todavía está sucia después de ejecutar el ciclo EasyClean®. ¿Qué más debo hacer? El ciclo EasyClean® solo ayuda a aflojar la suciedad leve de la cocina con horno para ayudar en la limpieza manual del horno. No quita automáticamente toda la suciedad después del ciclo. Es posible que necesite fregar la cocina con horno después de haber ejecutado el ciclo EasyClean®.
48 SOLUCIÓN DE PROBLEMAS Antes de llamar al servicio técnico Antes de llamar para solicitar servicio, revise esta lista. Puede ahorrarle tiempo y gastos. La lista incluye sucesos comunes que no son consecuencia de problemas de fabricación ni de los materiales de este aparato. Síntomas Causas / soluciones posibles •• Mala instalación. Coloque el estante en el centro del horno. Coloque un nivelador en el estante del horno.
SOLUCIÓN DE PROBLEMAS 49 Síntomas Causas / soluciones posibles •• El enchufe de la cocina no está insertado completamente en el tomacorriente. - Asegúrese de que el enchufe esté conectado a un toma funcional y conectado a tierra. •• Es posible que se haya quemado un fusible o que se haya disparado el disyuntor de su casa. - Reemplace el fusible o restablezca el disyuntor. •• Los controles del horno están mal configurados. - Consulte la sección Uso del horno. •• Horno demasiado caliente.
50 SOLUCIÓN DE PROBLEMAS Síntomas Causas / soluciones posibles •• Se usó papel de aluminio en la asadera y la rejilla no se colocó correctamente ni se cortó como se recomendó. La comida no se asa correctamente - Consulte la sección Uso del horno. •• En algunas áreas, el voltaje puede ser bajo. - Precaliente el asador durante 5 a 7 minutos. - Consulte la Guía de recomendaciones para asar.
SOLUCIÓN DE PROBLEMAS 51 Síntomas Causas / soluciones posibles •• El horno está demasiado caliente. - Deje que el horno se enfríe a una temperatura inferior a la de bloqueo. •• Espere aproximadamente una hora para que el horno se enfríe después de la finalización de un ciclo de Autolimpieza. La puerta puede abrirse cuando ya no aparezca el candado en la pantalla. •• Es posible que estén bloqueados el control y la puerta. •• Los controles de horno no están bien configurados.
52 SMART DIAGNOSIS™ SMART DIAGNOSIS™ Si tiene problemas con su cocina, esta tiene la capacidad de transmitir datos a su teléfono inteligente mediante la aplicación LG Smart Oven (Horno inteligente de LG) o a través del teléfono al centro de atención de LG. Smart Diagnosis™ no puede activarse a menos que encienda su cocina presionando el botón Start. Si la cocina no se puede encender, deberán resolverse los problemas sin usar Smart Diagnosis™.
GARANTÍA 53 GARANTÍA (EE. UU.) Período de garantía Alcance de la garantía Un (1) año a partir de la fecha de compra minorista original Piezas y mano de obra CÓMO SE MANEJA EL SERVICIO TÉCNICO LG suministrará las piezas y la mano de obra para reparar o reemplazar las piezas defectuosas. •• Los productos y las piezas de repuesto están garantizados durante el tiempo restante del período original de garantía o noventa (90) días, lo que resulte mayor.
54 GARANTÍA •• El retiro y la reinstalación del producto si está instalado en un lugar inaccesible o no está instalado de acuerdo con las instrucciones de instalación publicadas, lo que incluye los manuales de instalación y del propietario de LG. •• Daños resultantes de mal uso, abuso, instalación, reparación o mantenimiento incorrectos. Una reparación incorrecta incluye el uso de piezas no aprobadas o especificadas por LG.
GARANTÍA 55 Problema •• La superficie es despareja. •• El horno está inclinado. Causa Prevención 1. La cocina no está nivelada. •• Verifique primero con el instalador. 2. El dispositivo antivolcadura no se instaló correctamente. Placa de pared 0.65 pulgadas (16.5 mm) Use un nivel de burbuja para comprobar la nivelación. 2 1 El costo de la reparación o el reemplazo en estas circunstancias excluidas estará a cargo del consumidor.
LG Customer Information Center 1-800-243-0000 1-888-542-2623 USA CANADA Register your product Online! www.lg.