CDMA Fixed Wireless Telephone User Manual Model: LSP-200 / 201
LGIC CDMA Fixed Wireless Telephone LSP-200 REVISED HISTORY DATE 1999/06/30 ISSUE ISSUE 1 . CONTENTS OF CHANGES Initial Release .
LGIC CDMA Fixed Wireless Telephone LSP-200 CONTENTS Highlights ................................................................................................................................ 7 1. Important Information.................................................................................................... 8 1.1 Safety Information ...................................................................................................... 8 1.2 Optimal Phone Performance.................................
LGIC CDMA Fixed Wireless Telephone LSP-200 5. Features while in a Call ............................................................................................... 23 5.1 5.2 5.3 5.4 5.5 Ear Volume............................................................................................................... 23 MIC Volume.............................................................................................................. 23 Mute ..................................................................
LGIC CDMA Fixed Wireless Telephone LSP-200 Highlights Congratulations on your purchase of the LSP-200 Fixed Wireless Telephone. This telephone has been designed to operate on the latest digital mobile communications technology. This technology has greatly enhanced voice clarity and can provide various advanced features.
LGIC CDMA Fixed Wireless Telephone LSP-200 1. Important Information 1.1 Safety Information Warning To reduce the risk of fire or electric shock, do not expose this product to rain or moisture. Do not use this product near swimming pools or other bodies of water. IMPORTANT Before installing or operating this product, read this information before using your telephone. 1.
LGIC CDMA Fixed Wireless Telephone LSP-200 l We recommend you to charge the backup battery before initial use. Backup battery may be discharged during delivery. 1.3 Care and Service l Unplug the telephone from the wall outlet and remove antenna (or disconnect antenna cable) before cleaning. Do not use liquid or aerosol cleaners. Use a damp cloth for cleaning. l If the unit fails for any reason, do not attempt to disassemble; contact the telephone service provider for assistance.
LGIC CDMA Fixed Wireless Telephone LSP-200 2. Introduction 2.
LGIC CDMA Fixed Wireless Telephone LSP-200 2.2 LCD Display The LCD shows different wireless state and the displays visual feedback for the actions performed by user.
LGIC CDMA Fixed Wireless Telephone LSP-200 2.3 Installation You should follow each step carefully as shown below in order to guarantee proper operation of CDMA Fixed Wireless Telephone. STEP I. Check Components l Fixed Wireless Terminal is supplied with the following standard unit and accessories; 1. LSP-200 Main Unit with Handset -1EA2. Dipole Antenna -1EA3. Backup Battery -1EA4. User Guide . -1EA5. AC/DC Power Adapter -1EA6.
LGIC CDMA Fixed Wireless Telephone LSP-200 Handset Connector Antenna TNC Connector AC Power Supply Connector STEP IV. Check the LCD Display l l After you follow the installation instruction step I to step III, please check the LCD for normal operation. If you may not see status of service, please repeat the 5th instruction of step III. And conform Fixed Wireless Telephone to get the proper signal strength from service operator system.
LGIC CDMA Fixed Wireless Telephone LSP-200 2.4 Installation Steps Please follow the below procedure to install the unit properly. 1 1 2 Connect Base- 1 handset to the handset connector. Connect the antenna to the TNC connector (Turn right). 3 1 4 Bend the antenna 1 up right. Open the battery cover at the bottom of the unit. 5 1 6 Insert back-up 1 battery in the bottom of the unit. 13 Connect the AC power supply.
LGIC CDMA Fixed Wireless Telephone LSP-200 3. Basic Operation 3.1 Making a Call 1. Pick up the handset or press button. 2. Listen for dial tone 3. Enter the phone number with area code if needed. 1234567 4. Wait for the Auto Time-out. Calling... 1234567 5. The call is connected and you can start conversation. 6. To disconnect the call, replace the handset or press button. 3.2 Redialing Last Outgoing Number Pick up the handset or press button. Listen for dial tone. Press Redial button.
LGIC CDMA Fixed Wireless Telephone LSP-200 3.3 Receiving a Call 1. When bell rings, pick up the handset. Incoming Call! 2. Start conversation. 3. To disconnect the call, replace the handset. Time: 0:23 1234567 menu 3.4 Signal Strength The quality of calls depends on the signal strength in your area. The stronger the signal, the better the call quality. The signal strength icon indicates the current strength as a number of bars.
LGIC CDMA Fixed Wireless Telephone LSP-200 List of Menu State Main Menu Sub-Menu 1. Select Volume 1. Ring Volume 2. Key Volume 3. Ear Volume 2. Ring Select 3. Wake-up Time 4. Security 1. Lock Mode Set 2. Clear Calls 3. Clear Memory Setting Value Default 3 steps 3 steps +silent 3 steps 10 types 12 hour (AM/PM) 10 ea. 99ea 4. Emergency Call Local (3 ea.) 5. Lock Code 4 digit 5.Convenient 1. Hot Line 2. Hot Line Time 3. Speed Dial Enable/Disable 2-9 Sec. Enable/Disable 6. Additional 1.
LGIC CDMA Fixed Wireless Telephone LSP-200 4.1.2 Key Volume The tone when you press a key can be adjusted. 1. Press [menu] + 1(Select Volume) + 2(Key Volume) in on-hook state. 2. Key Level Press Volume button or [next] to adjust key volume. ok 3. Press [ok] 4.1.3 Ear Volume The voice of the other party can be adjusted in on-hook state. 1. Press [menu] + 1(Select Volume) + 3(Ear Volume) in on-hook state. 2. Press Volume button or [next] to adjust ear piece volume next Ear Level ok next 3.
LGIC CDMA Fixed Wireless Telephone LSP-200 4.3 Wake-up Time This function allows you to adjust Wake-up Time. 1. Press [menu] + 3(Wake-up Time) MAIN MENU 3:Wake-up Time 4:Security 2. Select Always, once or off by [next] and press [ok]. Alarm Time ok Always next 3. Press [edit] and set the time. Wake-up Time _1:23 AM 4. Select A.M. or P.M. by [AM/PM]. 5. If you want to modify the wrong time, press Clear button and set again. AM/PM ok 6. Press [ok] to save and exit 4.4 Security 4.4.
LGIC CDMA Fixed Wireless Telephone LSP-200 4.4.2 Clear Calls When a previous outgoing or incoming call history is stored in a memory location, you can erase the all call history. 1. Do the above 1 and 2 steps of 4.4.1. 2. Press 2(Clear Calls) 3. Press [yes] to erase all call history Clear Calls? yes no 4.4.3 Clear Memory When you want to delete phonebook memory, you can erase all phonebook memory. 1. Do the above step1 and 2 of 4.4.1. Clear Memory? 2. Press 3(Clear Memory). 3.
LGIC CDMA Fixed Wireless Telephone LSP-200 4. Enter new lock code again to confirm and press [ok] to save. 4.5 Convenient Features While the Hot line function is enabled, the programmed number will be automatically dialed when you pick up the handset and wait for the programmed hot line time (2~9 sec) without any key press. 4.5.1 Hot Line 1. Press [menu] + 5 (Convenient) 2. Press 1(Hot Line) CONVENIENT 1:Hot Line 2:Hot Line Time 3. Select on or off by [next] or Volume button and press [ok] to select.
LGIC CDMA Fixed Wireless Telephone LSP-200 This function can be used when the Speed Dial is set to Yes. l Speed Dial Function 1. You can store phone numbers in memory locations (1~99) and place a call. 2. Press the memory number (1 through 99) corresponding to the appropriate memory location, and hold for a few seconds. 4.6 Additional feature 4.6.1 Key-tone Length Setting key beep playback length. Possible settings are Short and Long. 1. Press [menu] + 6(Additional).
LGIC CDMA Fixed Wireless Telephone LSP-200 5. Functions while in a call 5.1 Ear Volume You may adjust ear volume while you are in a call. Time: 0:23 1234567 menu The Volume button on the right side of the phone can be used to adjust ear volume. Ear Level 5.2 MIC Volume Adjusting MIC volume while in a call. 1. Press [menu] and 2(MIC Level) while in a call. 2. Select Low or High by [next] or Volume button. IN-CALL MENU 1:Memo 2:MIC Level MIC Level High 3. Press [ok] to save and exit. ok next 5.
LGIC CDMA Fixed Wireless Telephone LSP-200 3.4 Memo You can save numbers while in a call. 1. Press [menu] and 1(Memo) while in a call. 2. Enter a number by key pad. IN-CALL MENU 1:Memo 2:MIC Level add 3. 114 quit Press [add] to save and exit. Or press [quit] to exit. Number Stored in Call List 5.5 Transmitting your own number This function is a convenient feature which enables you to transmit your own phone number while in a call through one key press.
LGIC CDMA Fixed Wireless Telephone LSP-200 6. Searching, Editing & Dialing 6.1 Retrieving Last Call History 1. Press [recall] and 1(Last Calls) RECALL MENU 1:Last Calls 2:Memories - 2. Select a number or a name in the last call list by [next] and press [view]. 01:ADG 028503619 edit 3. To see more information press [time] or press [save] to save a number in the memory. ü Pick up the handset or Press button to make a call with the displayed number.
LGIC CDMA Fixed Wireless Telephone LSP-200 - You can see a confirming message. ABC was stored in #01 - You can see used memory situation. Memory... Used : 01 Unused : 99 6.2 Retrieving Phone Number by Address 1. Press [recall] and 2(Memories) 2. Enter a memory address to retrieve phone number. (ex: If you enter a memory address, 01.) ü If there is no stored phone number in the memory location, “Empty address” is displayed. 3.
LGIC CDMA Fixed Wireless Telephone LSP-200 ü Press [ok] to make it non secret Make it Secret? No next ok l Erasing process ü You might press [erase] at the above step 3. Erase #01? 028503619 ok quit ü Press [ok] to complete erasing process. - erased! - 6.3 Retrieving Phone Number by Name 1. Press [recall] and 2(Memories) 2. Press [name] to retrieve phone number by name. Recall Address? ?? name quit 3. Enter the name that you want to look for and press [find].
LGIC CDMA Fixed Wireless Telephone LSP-200 7. SMS (Short Message Service) Messaging, Paging, and Voice mail features are available when your phone is turned on. Using Message button allows you to access messages for viewing on the LCD screen. While viewing a message, you can return the call with the number provided in the message by picking up handset. Check with your WLL service provider regarding the availability of this feature.
LGIC CDMA Fixed Wireless Telephone LSP-200 4. Press [erase] to erase a message. ü Press [yes] to complete erasing process. Erase Message? yes no 7.1.2 Voice Message Voice mail notifications indicate the number of new voice mail message in your mail box. Only the most recent voice mail notification will be stored in the WLL phone; previous messages will be overwritten. When a voice mail messages left for you, the WLL phone will alert and display “ -Voice Mail -“.
LGIC CDMA Fixed Wireless Telephone LSP-200 8. Beside Functions 8.1 Redial Pick up the handset or press number. button and Redial button to redial last outgoing 8.2 Viewing your own number Press Redial button in on-hook state to see your own telephone number WLL 012-345-6789 9. Storing Phone Number 9.1 Storing/Editing Phone Numbers 9.1.
LGIC CDMA Fixed Wireless Telephone LSP-200 ü You can see a confirming message. ABC was stored! in #01 ü You can see used memory situation. Memory... Used : 01 Unused : 99 l To enter a character. You can enter English character in editing mode. You can enter English character as default, and press Message to select specific character. l To enter English character.
LGIC CDMA Fixed Wireless Telephone LSP-200 ü ü If there is no stored phone number in the memory location, “Empty Address” is displayed. If you do not remember the memory location to erase, press Volume button or press [name] to search phone number by name. Empty Address Search for find 2. Erasing process 01:ADG 028503619 edit ü erase Press [erase] to delete. Erase #01? 028503619 ok quit ü Press [ok] to complete erasing process. - erased! - 9.
LGIC CDMA Fixed Wireless Telephone LSP-200 ü ü Locate in the desired name or address to find. If not any entered name, phone number is displayed. 3. Press [view] to see the stored number. 4. To make a call with the phone number in the state of step 2 or step 3, pick up the handset or press button and wait for Auto Time-out.
LGIC CDMA Fixed Wireless Telephone LSP-200 10. General Information Main Unit LSP200 Specification Item Tx Frequency Rx Frequency Channel Bandwidth Tx Power Rx Sensitivity Size Weight(g) Operating Temperature Description Digital : 824 ~ 849 MHz Digital : 869 ~ 894 MHz 1.25 MHz Digital : Max. 0.