OWNER’S MANUAL Wall Mounting Bracket Please read this manual carefully before operating your set and retain it for future reference. LSW130B P/NO : MFL63640533 (1212-REV00) www.lg.com (Brazil : www.lge.
Component Wall mount anchor 4 units Wall mount screw 4 units User manual PVC Washer 4 units Set protection cushion 4 units Set screw M4 X 10 mm 4 units M4 X 14 mm 4 units IMPORTANT SAFETY INSTRUCTIONS Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Warning This wall mount should be installed by a trained and experienced installer designated by the retailer.
s s ENGLISH Caution Install the product according to the directions in the user manual. If the product is not installed based on the directions in the user manual, it can cause a serious injury or damage to the product. During the installation, check the type of wall material and use the sealed anchor and screw if the conditions comply. When installing the product or adjusting the height of the product after installing, always do so with 2 people.
Installation method - Tools you will need : Phillips head "+" driver(Manual or motorized) Ø4 mm drill bit for wood or steel / Level / Stud finder / Drill. You may also need an 8 mm socket wrench or an Ø8 mm drill bit for concrete. 1 Separating the TV bracket 1 3 2 Safety pin 1. After expanding the wall mount forward as shown in Fig. 1, separate the safety pin from the wall mount as shown in Fig. 2. 2. Separate the set bracket as shown in Fig. 3.
How to attach to masonry walls - Use the anchors for wall material of concrete, light concrete, strong natural stone, soft natural stone masonry brick and hallow block that do not crack. Please follow the below direction. - Check the material of the wall and the thickness of the finishing. - When installing the product on wall material not designated, install the product so that each fixated location can withstand the pull out load of 70 kgf (686 N) and shear load of 100 kgf (980 N) or above.
How to assemble the wall mount support and display 5 - Always install the display with 2 or more people. Safety pin → fter mounting the display, insert the safety pin as shown. If the safety pin is not fixated as shown in the picture, A the display can fall. → After the install is finished, pull the bottom part of the display to verify the product is attached securely. →The → clearance from the wall is 14 mm (32LE46* : 36 mm) for this product.
[ Unit : mm ] -15° - +15° ± 2° -15° - +15° ± 2° Max. Model Name LSW130B Width (mm) 221 Height (mm) 152 Depth (mm) 14 Weight (kg) 0.9 Wall Mount VESA Specification 100 X 100/200 X 100 Max. UL Load Capacity (kg) Min.
The model and serial number of the product is located on the back or one side of the product. Record it below should you ever need service. MODEL SERIAL Supported Displays: (Please contract the retailers or refer to the TV owner’s manual for applicable models.
