OWNER’S MANUAL Wall Mounting Bracket Please read this manual carefully before operating your set and retain it for future reference. LSW220BX P/NO : MFL63640513 (1203-REV00) www.lg.
Component Wall mount anchor 4 units Wall mount screw 10 units User manual Guide spacer 4 units Guide space screw 4 units Safety clip 2 units Safety clip screw 2 units (M4X12mm) Set protection cushion 4 units IMPORTANT SAFETY INSTRUCTIONS Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Warning This wall mount should be installed by a trained and experienced installer designated by the retailer.
Install the product according to the directions in the user manual. If the product is not installed based on the directions in the user manual, it can cause a serious injury or damage to the product. During the installation, check the type of wall material and use the sealed anchor and screw if the conditions comply. When installing the product or adjusting the height of the product after installing, always do so with 2 people.
Installation method - Tools you will need : Phillips head "+" driver(Manual or motorized) Ø4mm drill bit for wood or steel / Level / Stud finder / Drill. You may also need an 8mm socket wrench or an 8mm drill bit for concrete. - The actual product may differ from the picture. 1 Attach the mounting bracket to the TV I f the screw will not fully tighten when using a guide spacer, recheck the assembly depth of the screw and refer to the technical service manual. Guide spacer 2 1.
Wall mount screw 76mm drywall 406mm wood stud drywall a. L ocate and mark the centers of the wall studs using a stud finder. b. After aligning the wall bracket on the wall where the center of the wood stud is marked, mark the location of the screws and then remove the wall bracket. c. Use a level to make sure your screw marks are level. d.
Do not put pressure on the display panel The display panel on Cinema Screen models (LM64**, LM66**, LM67**, LM76**, LM86**) can be easily damaged by pressure or shock. Please handle the product with care. For more information, please refer to the owner's manual of the TV. 5 How to level the Display After installing the display, check to make sure it is level. The wall mount has two screws that make minor adjustments to the level.
ENGLISH [ Unit : mm ] 15±2° 13±2° 5.2 17 LSW220A LSW220A MAX. MIN. 25 97.5 147.5 200 240 189.6 200 234 234 25 107.3 118.3 20 24 35 5.2 17 20 5.2 17200 189.6 200 234 189.6 189.6 200 234 189.6 200 234 5.2 17 5.2 17 LSW220A LSW220A 5.2 17 5.2 17 LSW220A 25 20 25 20 97.5 147.5 20 200 240 97.5 147.5 200 240 25 25 97.5 147.5 200 20 240 107.3 118.3 5.2 17 20 2525 24 35 25 5.2 17 97.5 147.5 200 240 5.2 17 25 20 20 107.3 24 118.3 35 107.3 118.
The model and serial number of the product is located on the back or one side of the product. Record it below should you ever need service. MODEL SERIAL Supported Displays (Please contract the retailers or refer to the TV owner’s manual for applicable models.
