OWNER’S MANUAL Tilt Wall Mounting Bracket Please read this manual carefully before installing this product and retain it for future reference. LSW630B P/NO : MFL63640530 (1211-REV00) www.lg.com (Brazil : www.lge.
Component Wall mount anchor Wall mount screw 8 units 10 units User manual Guide space screw 4 units Set protection cushion 4 units Guide spacer 4 units IMPORTANT SAFETY INSTRUCTIONS Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Warning This wall mount should be installed by a trained and experienced installer designated by the retailer. Having the product installed by a non-specialized installer is very dangerous and can cause damage or injury.
ENGLISH Caution Install the product according to the directions in the user manual. If the product is not installed based on the directions in the user manual, it can cause a serious injury or damage to the product. During the installation, check the type of wall material and use the sealed anchor and screw if the conditions comply. When installing the product or adjusting the height of the product after installing, always do so with 2 people.
Installation method - Tools you will need : Phillips head "+" driver(Manual or motorized) Ø4 mm drill bit for wood or steel / Level / Stud finder / Drill. You may also need an 8 mm socket wrench or an 8 mm drill bit for concrete. - The actual product may differ from the illustrations in this manual. - If the diagonal length of TV screen is 182 cm or more, please consult with a professional installer prior to installing the TV with a wall mounting bracket.
ENGLISH 3 How to install the wall mount → I f it’s not possible to use the indicated bolt holes, use the closet ones. Don’t go more than two away from the indicated position. → Attach the right and left side with two bolts each. → U se a Phillips head "+" driver (Manual or motorized) or 8 mm wrench to tighten the screws. Tighten each screw until the set, guide spacer, and the screw are fully pressing against one another.
the Bracket to the TV 4 Connecting - Always have 2 or more people hold the product for installation. When inserting the guide spacer, align its center with the arrow shown in the figure for easy installation. * Caution: Prevent the power cord from being pinched between the wall mounting bracket and the set when installing the set. (A pinched power cord may cause damage to the product.) 1.
ENGLISH Level Adjustment 6 Horizontal - If the product leans to one side, adjust the tilt with bolt. (The product tilt is changed according to bolt’s rotation direction.
Please follow the instructions. Cinema Screen models (LM64**, LM66**, LM67**, LM76**, LM86**, LA66**, LA69**, LA74**, LA79**, LA86**) are easily damaged by external shock, so please handle the product with care. Do not touch the screen when lifting the TV. For more information, please refer to the owner's manual of the TV. 7 Tilt Angle Adjustment - The tilt angle can be adjusted after installation and setup.
ENGLISH 8 Cable and Protective Cushion Arrangement -A rrange the cables as shown in the picture. Use some type of cable banding device to hold all the cables together. - Attach the set protection cushions to mitigate any impact between the wall and the set. Attach the set protection cushions as shown in the picture. Product specification [ Unit : mm ] MAX. MIN. 494 303.6 272.6 241.
The model and serial number of the product is located on the back or one side of the product. Record it below should you ever need service. MODEL SERIAL Supported Displays (Please contract the retailers or refer to the TV owner’s manual for applicable models.
