Full Product Manual

16 INSTALLATION
1
Place the door onto the lower hinge pin.
1
Place the door onto the lower hinge pin.
2
Fit the upper hinge over the hinge lever
latch and into place. Rotate the lever
counterclockwise to secure the hinge.
3
Reconnect all wire harnesses. Hook the tab
on the switch side of the cover under the
edge of the wire opening in the cabinet top.
Put the cover in place and reinsert the screw.
2
Fit the upper hinge over the hinge lever
latch and into place. Rotate the lever
clockwise to secure the hinge.
3
Feed the water lines through from the
top of the refrigerator until they exit at
the back.
4
Reconnect the water lines by inserting
them into the connectors. The water lines
are inserted correctly when only one of the
two guidelines remains visible.
5
Reconnect all of the wire harnesses.
6
Reconnect the ground wire.
7
Hook the tab on the switch side of the
cover under the edge of the wire opening in
the cabinet top. Position the cover in place.
Insert and tighten the cover screw.
Water hoses should be cut leaving a clean,
straight edge to avoid leaks.
Reinstalling the Left (Freezer)
Door
Disassembling/Assembling the
Water Lines
NOTE
•
Bottom hinge
(1)
(2)
Collet
Tube
Insert lines
Tube
(Correct) (Incorrect)
Reinstalling the Right (Refrigerator)
Door