20.
Warnings Warnings WARNING RISK OF ELECTRIC SHOCK DO NOT OPEN WARNING : To reduce the risk of electric shock do not remove cover (or back). No user serviceable parts inside. Refer servicing to qualified service personnel. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
Contents Before operating the set, please read this manual carefully. Warnings Contents Supplied Accessories Installation Controls Controller of panel Remote controller Basic Operation Turning ths TV On and off Programme selection Volume adjustment Q.
Supplied Accessories Installation L Make Sure the following accessories are provided with Product. Installation Options * You can install the TV on a wall or place it on a table-like surface. * To eliminate any risk of injury from the TV falling, it should be mounted securely. 1. AC/DC adaptor 1. Wall Installation 2. AC Cord Caution: Do not install the TV on a weak wall surface, like plaster etc. It is not needed any bracket or installation accessory with the exception of 2 nails or screws.
Controls Controls <> All the functions can be controlled with the remote controller. Some functions can also be adjusted with the buttons on the front panel of the set. 1. MENU Displays a menu. 2.– PR + (Programme Up/Down) Selects a programme or a menu item. 3. POWER STANDBY INDICATOR Illuminates brightly when the TV is in standby mode. / Dims when the TV is switched on. 4. POWER Switches TV set on or off. 5. Remote control sensor Accepts the IR signal of remote controller. 6.
Controls Basic Operation Turning the TV On and Off 11. PRxy (Programme Up/Down) Selects next programme or a menu item. POWER 12. VOLÏq (Volume Up/Down) 1 2 3 4 5 6 7 8 9 * 0 * PSM SSM I/II Adjusts the sound level. Adjusts menu settings. 13. OK Accepts your selection or displays the current mode. MENU Standby Setup: The AC-DC converter and the AC power cord must be set up and connected to have the TV in standby mode ready to be turned on.
On Screen Menus and Displays Setting up TV Programme 1. Press the MENU button to display main menu. 2. Press the PR xy button to select menus-Picture, Sound, Special, Setup. Ïq button. 3. Adjust each menu with the VOLÏ 4. Press the MENU button to return to preceding menu. Equalizer 5. Press the TV/AV button to finish adjusting menu. Flat Once you have preset the programmes, you will be able to xy or NUMBER buttons to scan the use the PRx programmes you programmed.
Setting up TV Programme Setting up TV Programme Manual programme Manual programme Programme edit Programme edit Manual Programme lets you manually tune and arrange the programmes in whatever order you desire. Also you can assign a programme name with 5 characters to each programme number. 1. Press the MENU button. 2. Select the Setup menu. 3. Select Manual programme menu. xy button to select System. 4. Press the PRx Ïq button. 5. Select a TV system with the VOLÏ BG : (Germany/Asia/M.
Picture Control Sound Control You can adjust picture Contrast, Brightness, Colour and Sharpness to the levels you prefer. You can select your preferred sound setting; Flat, Music, Movie or Speech and you can also adjust the sound frequency of equalizer, balance. If you switch AVL to on, the set automatically keeps on an equal volume level even if you change programmes. 1. Press the MENU button. 2. Select the Sound menu. xy button to select the desired 3.
Other functions Other functions TV, SCART, VIDEO and S-VIDEO modes Special (You can’t set PC mode in this menu. Use the TV/PC button) External equipment inputs: VIDEO or S-VIDEO mode are used for video devices like VCRs, DVDs, etc.), SCART, is used for component type devices. Input Auto Sleep Blue back Note : If a VCR is connected to the antenna jack, use TV mode. See External Equipment Connection section. 1. Press the MENU button. 2. Select the Special menu. xy button to select Input. 3.
Teletext TEXT On/Off 1. Press TEXT/MIX button once, displays the Teletext pages. 2. Press TEXT/MIX button once more, displays the Teletext pages superimposed on the TV picture. 3. Press the TEXT/MIX button to switch off Teletext once more, Text mode is off, and TV mode appears. If you press TEXT/MIX button repeatedly, displays are changed as below.
Connecting PC as monitor Connecting PC as monitor You can adjust picture Contrast, Brightness, Temperature, Horizontal/Vertical position, Clock, Phase, Auto and Reset as you prefer. 1. Press the TV/PC button to select the PC mode. 2. Press the MENU button. xy button to select the desired 3. Press the PRx picture item. Ïq button to make appropriate 4. Press the VOLÏ adjustments. Contrast Brightness Clock Phase x 1.
Model Troubleshooting LT-20AEP Horizontal size 580 mm Thickness Power requirements Television system Television programme LCD Panel Power consumption 504 mm Check item No picture on screen and no sound from speakers • Insert the AC power cord plug securely in AC power outlet. • Make sure the remote control is not in the standby mode (The POWER/Standby indicator is red.) • Turn on the MAIN POWER button on the top of the display.
Limited Warranty 28