Owners manual
ENGLISH
15
CARE & CLEANING
Cleaning the Foam Filter
For optimal performance, check the lters every month and clean
when necessary. Don’t close the dusk tank lid without the foam
lter.
To clean the foam filter:
1. Remove the dusk tank from the vacuum cleaner.
2. Lift up on the dust tank lid release and open the lid.
y A wet lter can cause permanent damage to the
vacuum cleaner.
y Be sure lters are completely dry before reinstalling.
CAUTION
3. Lift out the foam lter.
4. Separate the foam lter from the lter frame.
5. Shake out any excess dirt or debris and rinse the foam lter and lter
frame with clean water. Squeeze out water from the foam lter.
6. Dry completely away from sunlight.
NEVER operate the vacuum cleaner with wet lters or
components.
If you notice a loss of suction and cleaning the foam lter does not
help, you may need to replace the foam lter. You can purchase
additional foam lters from LG by calling 1-800-243-0000 (U.S.A.),
1-888-542-2623 (Canada) and asking for parts on page 6.
Cleaning the HEPA Filter
To Clean the HEPA Filter:
1. Remove the exhaust lter cover.
Exhaust Filter
Cover
2. Remove the lter from the body.
3. Wash the lter thoroughly in owing water.
4. Remove moisture.
5. Dry completely away from sunlight.
Filter