4 EA 3 EA 2 EA 2 EA 2 EA Left Guide Panel (Not adhesive backed) 1 EA 2 EA 5 EA Right Guide Panel 1 EA Curtain 2 EA 1 EA ( Adhesive backed) FOAM-HEATPROOF EA Phillips head screwdriver Scissors or knife Adjustable Wrench 11
slightly tilted between 27 16 Preparation Of Chassis Remove 4 screws which fasten the cabinet at both sides and at the back.(Keep the screws for later use.
the base pan (Adhesive backed) and bottom of window frame. (Adhesive backed) Upper guide Right Guide Panel Left Guide panel 8 Screws (Type A) Frame guide hole upper guide Center hole frame curtain sill support.
frame guides sill support sill support frame curtain frame curtain (removed from the cabinet) at See page 12.
Before installing the front grille, pull out the vent control lever located above the unit control knobs, as shown. 14 Cut the adhesive-backed FoamHeatproofs to the Guide Panel size. Foam-Heatproof Remove the backing from the Foam-Heatproofs and attach the Foam-Heatproofs to Guide Panel. Foam-Heatproof improves the cooling capability of the unit. 15 Attach the front grille to the cabinet by inserting the tabs the grille into the slots on the front the cabinet.