User Manual

LG GoldStream
Page 19 of 39
3.1.2 PC Card (PCMCIA) Network Configuration
If you have completed PC card installation, insert the PC card. If
you PC detects the PC card, you can find glittering LED and PC
sound. Also you will see the PC card icon on the right bottom of
your screen.
If you install LG’s wireless LAN card for the first time all the setup
process runs automatically. If you reinstall, the install program asks next two files folder
position and you should select same as the below:
File name Path
lgwlan.inf c:\windows\inf
cw10.sys c:\windows\system
And then the install program asks whether you want to reboot your computer. At this
time you should select No in order to complete the installation correctly.
Click on My Computer icon. Select the Device manager and network adaptors. If you
find yellow (?) sign on the adaptor, it shows the installation is not successful. Select the
adaptor and click on Remove. Restart your computer after uninstalling the driver to
make the change effective.
Click on the Network Neighborhood using mouse and select properties from the pop up
menu. The network box appears and you see three main tabs; Configuration,
Identification, Access control.
Click on the configuration tab and then click on add button. Select network component
type box appears. Click on the protocol then click the add button.
Select network protocol box. From the list of manufactures, click on Microsoft. From the
list of network protocols, select NetBEUI and click OK.
The NetBEUI protocol is now installed. After click on OK, return back to Network
Component Type box.
Repeat this protocol add procedure to add IPX/SPX protocol and TCP/IP protocol.