NORSK SUOMI OWNER’S MANUAL DANSK AIR CONDITIONER Please read this manual carefully before operating your set and retain it for future reference. TYPE : WINDOW MODELS LW8016HR P/NO : MFL69392001 www.lg.
Safety Precautions Before Operation 7 Introduction Electrical Safety Installation Operating Instructions 16 Maintenance and Service 20
Do not store flammables like gasoline benzene thinner etc.
No correlation between fan usage and oxygen depletion. Unplug the unit when not using it for a long time.
Hold the plug by the head (not the cable)when taking it out. When gas leaks, open the window for ventilation before operating the unit. Never touch the metal parts of the unit when removing the filter. For inner cleaning, contact an Authorized Service Center or a dealer. Do not use harsh detergent that causes corrosion or damage on the unit. Harsh detergent may also cause failure of product, fire, or electric shock. Install the product so the exhaust and noise are not aimed directly at the neighbors.
Do not use this appliance for special purposes such as cooling pets,foods,precision machinery,or objects of art Instead of running air conditioning constantly,open a window for fresh air occasionally. You will feel better. If the liquid from the battery gets onto your skin or clothers,wash it well with clean water. Do not use the remote if the battery has leaked. y If you eat the liquid from the battery,brush your teeth and see doctor.Do not use the remote if the battery has leaked.
2. No correlation between fan usage and oxygen depletion. 3.
Introduction Introduction Symbols Used in this Manual This symbol alerts you to the risk of electric shock. This symbol alerts you to hazards that could cause harm to the air conditioner. NOTICE This symbol indicates special notes. Features This appliance should be installed in accordance with the National Electric Code.
RESET TEST be should USE OF EXTENSION CORDS RISK OF FIRE could cause serious injury or death DO NOT use an extension cord with this window air conditioner DO NOT use surge protectors or multi-outlet adapters with this window air conditioner Avoid shock hazard. This unit cannot be user-serviced. Do NOT open the tamper-resistant sealed portion. All warranties and performance will be voided. This unit is not intended to be used as an ON/OFF switch.
13 EA 3 EA 2 EA 2 EA 2 EA Left Guide Panel (Not adhesive backed) 1 EA 2 EA 5 EA Right Guide Panel 1 EA Curtain 2 EA 1 EA ( Adhesive backed) 1EA Phillips head screwdriver Scissors or knife Adjustable Wrench Owner’s Manual 11
How to Install the Unit 1. To prevent vibration and noise, make sure the unit is installed securely and firmly 3. The outside of the cabinet must extend outward for at least 11" and there should be no obstacles, such as a fence or wall, within 20" from the back of the cabinet because it will prevent heat radiation of the condenser. Restriction of outside air will greatly reduce the cooling efficiency of the air conditioner. Cooled air Heat radiation 30"~60" 2.
the base pan (adhesive backed) (Adhesive backed) Upper guide Left Guide panel Right Guide Panel 8 Screws (Type A) Frame guide hole upper Center hole guide frame curtain sill support.
frame guides sill support sill support frame curtain frame curtain (removed from the cabinet) at See page 12.
(not adhesive backed ) (Not adhesive backed) Type C Before installing the front grille, pull out the vent control lever located above the unit control knobs, as shown. 14 slots Guide the lever carefully through the grille as you push it in. 15 Lift the inlet grille and secure it with a Type 15 A screw through the front grille.
Operating Instructions Operating Instructions Remote control The remote control and control panel will look like one of the following pictures. REMOTE CONTROLLER 7 Temp Fan Speed Timer Mode POWER Operation starts when this button is pressed and stops when you press the button again. OPERATION MODE SELECTOR Push the MODE button to rotate between Energy Saver / Cool / Fan / Heat. Energy Saver - The fan stops when the compressor stops cooling.
Operating Instructions TEMPERATURE CONTROL The thermostat monitors room temperature to maintain the desired temperature. The thermostat can be set between 60 F~86 F (16 C~30 C). FILTER RESET ‘Clean Filter’ LED will light up to notify you that your filter needs to be cleaned. After cleaning the filter, press ‘Filter Reset’ button to turn off ‘ Clean Filter’ light. This feature is reminder to clean the Air Filter (See Maintenance) for more efficient operation.
The horizontal direction is adjusted by moving the lever to the left or right. Adjusting horizontal air flow direction Touch the horizontal louvers to adjust the air airflow up or down. Adjusting vertical air flow direction NOTICE When the unit operates in extremely hot weather, it turns off automatically to protect compressor.
base pan drain base pan Slinger Fan 19
1. Lift the inlet grille upward. 2. Remove the air filter from the front grille by pulling the air filter up slightly. 3. Wash the filter using lukewarm water below 40 4.Gently shake the excess water from the filter and replace.
call 1-800-243-0000. an outlet of the proper voltage and amperage. Water drip from the rear of the unit Normal Sound High pitched Chatter Sound of Rushing Air Today’s high efficiency compressors may have a high pitched chatter during the cooling cycle. At the front of the unit, you may hear the sound of rushing air being moved by the fan. Pinging or Swishing Droplets of water hitting condenser during normal operation may cause “pinging or swishing” sounds.
Air conditioner does not start The air conditioner is unplugged. The fuse is blown/circuit breaker is tripped. Power failure. The current interrupter device is tripped. Air conditioner Airflow is restricted. does not cool as it should The temp control may not be set correctly. The air filter is dirty. The room may have been hot. Cold air is escaping. Cooling coil have iced up. Air conditioner The cooling coils are iced over. freezing up Water drips outside Water drips indoors Hot, humid weather.
Manual del usuario del acondicionador de aire tipo Ventana TABLA DE CONTENIDOS PARA SUS ARCHIVOS Escriba aquí el modelo y número de serie: Precauciones de Seguridad .........24 Antes de poner el equipo en funcionamiento..............................28 Modelo n°: Serie n°: Puede encontrar estos datos en la etiqueta situada en el lateral de cada unidad. Nombre del distribuidor: Fecha de compra: Introducción...................................29 Seguraida Electrica.......................30 Instalacion......
Aire Acondicionador
Manual del Propietario 25
No opere ni detenga la unidad insertando o estirando de enchufe. No dane ni use un enchufe de alimentaci on no especificado. No toque el producto con las manos mojadas o en un ambiente h umedo. Sostenga el enchufe por el cuerpo(no del cable) cuando lo saque. Para una limpieza interior, póngase en contacto con un Centro de Servicios Autorizado o un revendedor. No utilice detergentes abrasivos que causan corrosión o dañan la unidad.
Contiene elementos de contención y hacer que se enferme Si entra l lquido de las pilas en contacto con la piel o la ropa,lavela inmediatamente con agua.No utilice el control remoto si las pilas tienen fugas. Si el l quido de las pilas alcanzara su boca, cepille sus dientes y consulte a un medico。No utilice el mando a distancia si las pilas han experimentado fugas.
El funcionamiento del ventilador no afectará a la reducción de oxígeno.
Introducción Introducción Símbolos Utilizados en Este Manual Este símbolo lo advierte de un peligro de accidente por corriente eléctrica. Este símbolo lo adiverte de un peligro que pueda causar un daño del ventliador. CONSEJO Este símbolo significa condicciones especiales. Características (aparencia puede variar) Este aparato debería instalarse de acuerdo con las normas del Código Eléctrico Nacional.
Seguraida Electrica Seguraida Electrica Datos Electricos El cable de alimentación puede incluir un dispositivo interruptor de corriente. La carcasa del enchufe cuenta con un botón de prueba y otro de reinicio. El dispositivo debe comprobarse periódicamente presionando primero el botón TEST y después RESET. Si el botón TEST no se desconecta o si el botón RESET no permanece activo, suspenda el uso del aire acondicionado y póngase en contacto con un técnico de servicio cualificado.
Seguraida Electrica Seguraida Electrica IMPORTANTE (FAVORLEA CON ATENCIÓN) POR LA SEGURIDAD PERSONAL DEL USUARIO, ESTE APARATO DEBE SER DEBÍDAMENTE NEUTRALIZADO. El cordón de energía de éste aparato esta equipado con tres patas(cable a tierra). Utilice éste con un enchufe de pared de tres salidas(a tierr a) para minimizar el peligro de choque eléctrico. El cliente debe revisar el receptor de pared y el circuito por un electricista calificado para asegurarse que la recepción esta debidamente neutralizada.
TORNILLO (TIPO B) TORNILLO (TIPO A) 13 EA 3 EA TORNILLO (TIPO C) TUERCA PERNO 2 EA DINTEL DE SOPORTE 2 EA 5 EA MARCO DE LA CORTINA 2 EA 2 EA Grupo Guía de la izquierda BURLETE DE ESPUMA (No adhesivo respaldado) Grupo Guía de derecho CANO DE DRENAJE 1 EA 1 EA Cortina GUIA DEL MARCO 2 EA ABRAZADERA DE FIJACIONA LA VENTANA 1 EA BURLETE DE ESPUMA-PE ( Adhesivo respaldado) 1EA Un destornillador de estrella Una regla o cinta metrica Tijeras o cuchilla Nivel Lapiz 32 Aire Acondicion
Instalacion Instalacion Elija el major lugar Cerca Pabellón Aire frio 30"~60" Radiacion de calor Aproximamente 1/2" Over 20" Todas las ventanillas de los lados del gabinete deben mantenerse expuestas hacia afuera de la estructura. 4 Instale la unidad un poco inclinada de tal forma que la parte trasera esté ligeramente más baja que el frente(cerca de 1/2"). Esto forzará el agua del condensador hacia afuera. 5. Instale la unidad con la parte inferior cerca de 30"~60" arriba nivel de suelo.
Instalacion (Adhesivo respaldado) Burlete de espuma-pe (Adhesivo respaldado) Grupo Guía de la izquierda Guia superior 8 Tornillos (Tipo A) Guia del marco 34 Aire Acondicionador Grupo Guía de derecho
Tipo C Tipo C Tipo C Tipo C Tornillo Tornillo 35
Instalacion (No adhesivo respaldado) (No adhesivo respaldado) Antes de instalar la parrilla frontal tire hacia afuera de la control de ventilacion localizada encima de los botones de control de la unidad, como se muestra. 14 NOTA Guie la palanca cuidadosamente a traves de la parrilla mientras la empuja. 15 Levante la parrilla de entrada y ajústela con tornillos Tipo A, através de la parrilla frontal.
Instruccionnes de Funcionamiento Instruccionnes de Funcionamiento Control remoto El mando a distancia y el panel de control se parecerán a los de las siguientes imágenes. REMOTE CONTROLLER 7 Temp Fan Speed Timer Mode POWER El funcionamiento se inicia cuando se pulsa esta tecla y se detiene cuando se la presiona nuevamente. FUNCIONAMIENTO DEL MODO SELECTOR Pulse el botón MODE (Modo) para desplazarse entre Ahorro de Energía / Frío / Ventilador / Calentar.
Instruccionnes de Funcionamiento SELECTOR DE VELOCIDAD DEL VENTILADOP Usado para ajustar la velocidad del ventilador a Low (F1), High (F2). CONTROL DE TEMPERATURA El termostato monitorea la temperature de la habitacion para mantener la temperatura deseada. El termostato puede ser colocado entre 60 . REINICIO DEL FILTRO El LED “Clean Filter” (Limpiar filtro) se iluminará para avisarle que hay que limpiar el filtro.
Instruccionnes de Funcionamiento El control de ventilacion esta localizado encima de los paneles de control. Cuando esta ajustado en CLOSE(CERRADO),solamente el aire en el interior de la habitacion circulara y se acondicionara Cuando esta ajustado en open (ABIERTO),un poco del aire interno es expelido hacia afuera. Direccion del aire El flujo de aire puede ser ajustado cambiando la direccion de las rejillas de ventilacion del acondicionador deaire.
Ventilador de extracción 40 Aire Acondicionador
Manual del Propietario 41
1-800-243-000. Sonidos normales Traqueteo agudo Sonido de ráfagas de aire Los compresores modernos de alto rendimiento pueden presentar un traqueteo agudo durante el ciclo de enfriado. Delante de la unidad, puede oír el sonido de ráfagas de aire que son movidas por el ventilador. Goteo o chapoteo Las gotas de agua que caen sobre el condensador durante la normal operación del producto pueden producir sonidos de "goteo o chapoteo".( 40.
El aire acondiciona do no enciende El aire acondicionado esta desconectado. Asegurese que ei aire acondicionado esta conectado completamente a la fuente de energia. El fusible esta quemado/el interruptor de energia se habloqueado. Cheque los fusibles/interruptor de la casa y reemplace los fuslbles o reestablezca el interruptor de energia. Falta de energia. espere 3 minutos Cuando la energia se reestablezca , para encender de nuevo el aire acondicionado.
WARRANTY LG ROOM AIR CONDITIONER LIMITED WARRANTY - USA WHAT THIS WARRANTY COVERS: LG Electronics U.S.A., Inc. (“LG”) warrants your LG Room Air Conditioner ("product") against defect in materials or workmanship under normal household use, during the warranty period set forth below, LG will, at its option, repair or replace the product.
Garantía GARANTÍA LIMITADA DEL AIRE ACONDICIONADO LG - EE.UU. COBERTURA DE LA GARANTÍA: LG Electronics Inc. (“LG”) garantiza que reparará o sustituirá, gratuitamente, su producto si resulta defectuoso en materiales o mano de obra bajo condiciones normales de uso durante el periodo de garantía mencionado más abajo, efectivo a partir de la fecha de compra del producto original por parte del consumidor.
LG Customer Information Center 1-800-243-0000 LG ELECTRONICS,INC. 1000 Sylvan Ave.,Englewood Cliffs,NJ 07632 Register your product Online! www.lg.