Instructions / Assembly

ManualsBrandsLG Electronics ManualsAir Conditioners22,000 BTU Dual Inverter Smart Window Air Conditioner with WiFi Enabled and Remote

ENGLISH

OPERATION

Control Panel and Remote Control

Remote Control

4 3 2 1

5 76

Power

Press to turn the air conditioner ON or OFF.

Sleep Mode

This mode keeps operating noise to a

minimum and turns the air conditioner off

after a set time. The timer can be set from

1 to 7 hours.

Delay ON/OFF Timer

Delay ON - When the air conditioner is off,

set it to automatically turn on from 1 to 24

hours later, at its previous mode and fan

settings.

Delay OFF - When the air conditioner is on,

set it to automatically turn off from 1 to 24

hours later.

NOTE

●Each press of the Timer button advances

the timer by 1 hour. After the last press

the display returns to the temperature

setting.

Operation Mode

Press the Mode button to cycle between

4 types of air conditioner operation: Cool /

Energy Saver / Fan Only / Dry.

Cool - This mode is ideal on hot days to

cool and dehumidify the room quickly. Use

the Temp

buttons to set the desired

room temperature and use the Fan Speed

button to set the desired fan circulation

speed.

Energy Saver - In this mode the

compressor and fan turn off when the set

temperature is achieved. Approximately

every 3 minutes the fan turns on to allow

the unit sensor to accurately determine if

more cooling is needed.

Fan Only - In this mode the fan circulates

air but the compressor does not run. Use

the Fan Speed button to set fan speed to

High, Medium or Low. In this mode, you

cannot adjust the set temperature.

Dry - This mode is ideal for rainy and

damp days to dehumidify the room rather

than cooling it signicantly. Humidity is

removed from the room by the combination

of compressor operation and the fan speed

xed at Low. The compressor and fan turn

off once the set temperature is reached.

Fan speed cannot be adjusted in Dry mode.

Wi-Fi

Enables connection of the air conditioner to

the home Wi-Fi.

Summary of content (6 pages)

PAGE 1
OPERATION 15 OPERATION ENGLISH Control Panel and Remote Control Remote Control 5 6 7 8 8 1 9 4 7 3 10 2 4 3 2 1 1 Power Press to turn the air conditioner ON or OFF. 2 Sleep Mode This mode keeps operating noise to a minimum and turns the air conditioner off after a set time. The timer can be set from 1 to 7 hours. 3 Delay ON/OFF Timer Delay ON - When the air conditioner is off, set it to automatically turn on from 1 to 24 hours later, at its previous mode and fan settings.
PAGE 2
16 6 OPERATION Clean Filter The Clean Filter LED lights up to notify you that the filter needs to be cleaned. After and cleaning the filter, press Temp together on the control panel to turn off the Clean Filter light. Wireless Remote Control NOTE 1 Remove the cover on the back of the remote control. 2 Insert the new batteries and make sure that the + and - terminals of the batteries are installed correctly. ●●The filter reset must be done using the control panel, not the remote control.
PAGE 3
OPERATION Ventilation Additional Features Drain Pipe In humid weather, excess water may cause the base pan to overflow. To drain the water, remove the drain cap and secure the drain pipe to the rear hole of the base pan. CAUTION Close Open Air Direction Take care when inserting the drain pipe. Push away from the sharp fins to avoid slipping and injuring yourself. ●●Press the drain pipe into the hole by pushing down and away from the fins to avoid injury.
PAGE 4
18 SMART FUNCTIONS SMART FUNCTIONS LG SmartThinQ Application The LG SmartThinQ application allows you to communicate with the appliance using a smartphone. Before Using LG SmartThinQ ●●For appliances with the logo 1 Use a smartphone to check the strength of the wireless router (Wi-Fi network) near the appliance. ●●If the distance between the appliance and the wireless router is too far, the signal strength becomes weak. It may take a long time to register or installation may fail.
PAGE 5
SMART FUNCTIONS Installing the LG SmartThinQ Application NOTE ●●If you choose the simple login to access the LG SmartThinQ application, you must go through the appliance registration process each time you change your smartphone or reinstall the application. LG SmartThinQ Application Features ●●For appliances with the logo Firmware Update Keep the appliance performance updated. Settings Allows you to set various options on the appliance and in the application.
PAGE 6
20 SMART FUNCTIONS FCC Notice (For transmitter module contained in this product) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.